I have the following code:
PHP Code:
var soundPlay = true;var mySound:Sound = new Sound();mySound.attachSound("mySoundFile");
Does the above load my sound into my SWF file? This is what I want.
Can I use attachSound method to load 2 or more sounds to play at the same time? If yes, how?
View 2 RepliesThis is my first post, and and im not sure this is the right place to do it, but i need some help.
With AS2 in CS3, im trying to attach a sound from library, to a button that is also attach from library, when reading a XML file, but not yet succeed.
I want to play this sound the first time the button is attached and also onRollOver.
Let's say i got Movie A, which loads Movie B at some moment. And let's say that Movie B creates a sound, lets say:
var sndMusic = new Sound();
and then attaches it...
sndMusic.attachSound("music");
[Code]....
well, when i open Movie B alone, the music plays; when I watch it while being included in Movie A, it doesn't... BUT the sounds that are simply added by dragging and dropping on a keyframe DO work on both cases. I believe it's sth related to attachSound...
Are there issues with using attachSound to sync sound clips with Movie Clips? I currently am having this problem. I have all my sounds in a separate swf (sounds.swf), then I call the sounds like this:
Code:
gear1_btn.onRelease = function() {
logo.gear1.play();
sounds.gearssmfx.start();
}
I build the movieclips with the sound on the timeline, so that I know they sync up. Then I remove the sound from the movieclip, and actually play the sound with the AS above. The above AS should play the same in the browser, but doesn't. The problem is that the movieclip animations often run slower in the browser than they did within Flash. Is is possible that the movie is running at a slower FPS in the browser? I have noticed that it runs slightly slower in Firefox than IE. I'm currently using 32fps.
Here is my development : [URL]
Specifically, I'm having problems with the gears next to the letter "S" and "0", click on them to play.
1.Music player with an array of 3 songs;
2.The music player LOOPS one sound taken from an array of 3, and the sound is attached with attachSound method.
3.There are 3/4 buttons: Previous sound, Stop, Pause, Next Sound. With "previous sound" and "next sound" i actually mean next sound in the array.
So...I'm a bit "stuck" on managing the loaded and attached sounds, aka how to go to next sound, how to go to previous one etc.This is the code i've been able to write down:
Code:
var soundFiles:Array = ["9052_ok.mp3", "Glimmer_ok.mp3", "Loop_9095_ok.mp3"];
function playSound() {
var my_sound:Sound = new Sound(
[code]...
i am having this very big problem(for my particular application). i am writing this music application in flash and i use as2 to load randomly specific sounds which are in the same folder as the movie. the problem is that i need the sound to be replayed with fidelity and it seems flash is lowering the pitch of the "music" by a halfstep(it does the same when "previewing" it from the library). musically speaking, if i have an mp3 containing A at 440 hz played with piano timbre, Flash will lower it and when it is played through the flash player is its played as a G sharp(35 hz lower). I thought that if i will replace the attachSound with loadSound and the sound will be loaded externally and not from the library the problem will be solved. it seems that this won't solve the probem. the sound just doesn't want to be played at the frequency it has in the file from which is loaded. i had read somewhere that this is a flash player's bug.
View 8 RepliesI have a splash page.
I had a preloader which worked great before I added the sound (a WAV file) and I used attachSound.
Now the preloader doesn't work anymore!
I have tried putting the attachSound action on the main timeline, in the movieclip, in its own movie clip, EVERYWHERE! All to no avail.
I have a splash page. I had a preloader which worked great before I added the sound (a WAV file) and I used attachSound. Now the preloader doesn't work anymore! I have tried putting the attachSound action on the main timeline, in the movieclip, in its own movie clip, EVERYWHERE! All to no avail.
View 14 RepliesI'm trying to load a swf file within another swf file and then load different swf files from buttons.This is the code I'm using, but I can't get any of the swf files to load.
var Xpos:Number = 0;
var Ypos:Number = 0;
var swf:MovieClip;[code]...........
The following AS2 code is placed inside MC "speaker":
ActionScript Code:
var homeSound:Sound = new Sound(this);
homeSound.attachSound("page1Sound");[code]....
The MC "speaker" is two levels deep (inside an MC, which is inside an MC) in a fla and will not play. However, when I copy the MC "speaker" (and associated sound file) to a new fla it plays fine.
I can't seem to remove / unload the external swf files e.g when the carousel.swf (portfolio) is displayed and I press the about button the about content is overlapping the carousel (portfolio) . How can I remove / unload an external swf file from the main flash file and load a new swf file, while at the same time removing garbage collection from memory?
View 15 RepliesI have a rotaing menu that loads in images from an xml file, I would also like it to load in text info from the same xml file to the left side of the images that load in. In my main .fla have created a movieclip and called it 'textInfo' and inside that I have two dynamic text fields called 'headerText' and 'bodyText' where I want to load the text in. this is what I am using to loading in the text in my actionscript, is this correct?
[Code]...
I'm currently working on a project that contains a lot of data, about 14.000 records. This means an xml file of about 3mb. Now my question is: Should I use the xml file to load all the data at once, or should I use a webservice, that provides the data when I need it? Keep in mind that I'm new to webservices. And if I'm going to use a webservice: How do I store the data, in a mySQL database?How fast is a webservice?
View 1 RepliesI have a little app that can read and write content that is stored in XML files. As those files get updated and re-loaded quite often I have made the experience that the browser tends to use the old/cached XML-data. Can I somehow flag the URLLoader that I use to load the XML to always load the actual file instead of looking for cached versions?
View 4 RepliesWhen i try to load an external swf file using Loader.Load(); The swf starts playing even before the init event is fired. Is there any way to stop the swf from playing atleast until the init event or complete event is fired?
View 1 RepliesHow I can make this script lo load mp3 files via an external xml file like music.xml and if is possible to load random
Code:
music = new Sound();
music.onSoundComplete = function() {
[code]....
i have banner with 5 images fad in fade out effecti need to load images & test from external file " text file or xml file " with keeping fade effects on imagesall ways i know can't keep fading effect on images so
View 4 RepliesHaving got into flash about a year ago, I have a fairly good understanding of as3, but I have never had any reason to learn as2. For an upcoming project, we were looking to use Scaleform GFx, with the UDK. (Unreal Development Kit) Trouble is, Scaleform only supports as2. From what I've been told, as3 is supposed to be better in just about every way, so I really don't want to learn a language that?s most likely on the way out, if I have any other options.
Is there any converters out there, that can convert script from as3 to as2? Or another workaround possibility, since flash communicates with the UDK by means of just calling a function, could I create an as2 file that could dynamically load an as3 file?
i want to load variable from text file to my main movie (swf file).what should i put in the second parameter of the function loadVariables ("target" parameter) - should i insert _this? _parent? _global? (nothing works.
View 3 RepliesAll I'm trying to do is load an external .swf file into a precise location on the stage of my existing Flash file. I've spent an hour and a half on this site search and found nothing. What do I add to my loadMovie command to place the file at specific x,y coordinates?
View 3 Repliesi have a question. let say i have file1.swf , file2.swf, and file3.swf, how can i link this 3 files together,let say suppose file1.swf is the main content file, but as i load file2.swf, i want the file1.swf get replaced by file2.swf. How could i unload file1.swf at that time, so that my file2.swf will become the main content file?and again, when my current position at file2.swf, and i want it get replaced by file3.swf by clink on a button. so that the i can unload the file2.swf and let the file3.swf become the main content file.
View 13 RepliesI would like to run a .swf file into an existing flash file, but the dimension size of the .swf file is too big. I am a beginner to flash and not sure of the steps to execute this. Would anyone be willing to walk me through the steps to import the code?
View 1 Repliesi have a button that when it is pressed plays and loads an external flv file. this part works fine but directly after the flv video is finnished i want to load in an swf file. does some one have an idea how to do this? first show flv and then load swf?
this is the code as it looks now..
[Code]...
So I have this code which loads an xml file
[Code].....
I want to have several buttons however load a different xml file, not just use one file. Would this mean I would have to recreate the above code for every button, or is there anyway I could reuse it?
i'm building a website using flash. i have a external swf file that i want to import into my website. i thought this would be an easy task but for some reason when i load the movie, it flickers. my website (parent swf) was build using 1.0. The external form swf was build using 3.0. My approach:
1.create an empty movie clip called mcForm
2.go to the mc clip page i want to pull the external movie into
3. within my actions layer, I call the following function loadMovie("main.swf", mcForm);
If i write:
LoadMovieNum("main.swf",0);
then the my main.swf opens correctly but closes the parent swf file. I wan the main.swf file to be embeded within the parent file.
I'm trying to load an xml file from via http into my flash 8 file. Locally it works fine but when on the server it fails. I assume this has to do the flash security sandbox. How do I get around this. I own the servers so is there some sort of fix that I upload to allow the swf to receive the data?
View 1 RepliesI am using preloader from the main swf file to load other swf file, if i use a preloader inside my other swf file then it wont show so sorting that problem I am referencing this nice material on preloaders [] I have sorted the preloader problem by calling the preloader from the main swf file and hiding the other swf file till its fully downloaded. but now the problem is I have got no functionality from that swf file, i mean i have got that mouse effect in the other swf file that where ever you move the mouse in the screen the showreel adjusts itself but its static now.
I have got this container mc in my main swf file, and i am using the other swf file by clicking the button, the swf file loads in the container mc after showing the preloader but its kind a static.
I am trying to load a txt file into flash by putting the url in an xml file. The XML file is structured like this:
HTML Code:
<pic>
<image>pictures/AW0001.jpg</image>
<description>text/AW0001.txt</description>
</pic>
Now I load it into arrays in flash: image[0] and description[0]. The images is displayed the way I want to, the thing is I want to pass on the url that is in description[0] to a loadMovie or something like that. If i say desc_txt.text = description[0]; it will just show AW0001.txt in flash. I've also tried this with load and loadVars but I can't figure it out.
i want to load one xml file to swf file that located in different servers...
like
[URL]
but i have only one xml file that update of those flashes..
how i can to do allowdomain to the xml file?
this is what i have and it's not work
Code:
System.security.allowDomain("www.studiomor.com");
xmlData = new XML();
xmlData.ignoreWhite = true;
xmlData.onLoad = loadXML;
xmlData.load("http://studiomor.com/upload/google_AD.xml");
