i'm going by the tutorial "mastering Full Browser Flash" at [URL]
and i'm having trouble getting my mc to center in the stage and browser.here is the code i have on frame1:
Code:
Stage.scaleMode = "noScale";
stageListener = new Object();
stageListener.onResize = function() {
[Code]...
I have a script on my first frame to have a full browser tiled background. I also have a script to preload my file. My problem is they don't seem to be working well together. The preloader works but the full browser script doesn't center my file until I resize the browser and then it snaps to the center.
View 2 RepliesI can't get the content to center correctly when the browser window is resized. Despite efforts of trying to make the design work within all screen resolutions, it still does not fit correctly on smaller ones. What I want is for the content to center itself completely - Right now it only centers from left to right. Here is the code.
Code:
// Aligns everything to the top left side
Stage.align = "TL";
// Disables the movie from scaling
Stage.scaleMode = "noScale";
[code]....
The first thing I tried was simply adding all_mc._y = Stage.width/2; to the start values and the sizeListener, which worked until you clicked on the navigation and the all_mc movieclip is moved to a new X coordinate. It moves fine, but when you try to resize the browser, it jumps the movieclip back up to the top and moves back down again.
The website I am working on is here:
[URL]
I have not included a preloader yet, so it will be blank for a few moments before it loads.
My problem is, I can't get the content to center correctly when the browser window is resized. Despite efforts of trying to make the design work within all screen resolutions, it still does not fit correctly on smaller ones.
What I want is for the content to center itself completely - Right now it only centers from left to right. Here is the code.
Code:
// Aligns everything to the top left side
Stage.align = "TL";
// Disables the movie from scaling
[Code].....
all_mc is the movie clip that holds all of the website content. Pressing the buttons on the navigation makes the entire movieclip shift up and down.
The first thing I tried was simply adding all_mc._y = Stage.width/2; to the start values and the sizeListener, which worked until you clicked on the navigation and the all_mc movieclip is moved to a new X coordinate. It moves fine, but when you try to resize the browser, it jumps the movieclip back up to the top and moves back down again.
how to tell the movieclip to stay center after the x position changes.
I'm having a hard time setting up my website page to center (vertical and horizontal) my flash movie in a browser. I was finally able to get it to fit screen no matter what resolution, but it looks more to me like it's aligning itself top/left.
[Code]....
I have a 2037px wide flash movie that I purposely made that wide so that it would take up just about any screen.
What I'm trying to do is simply center it and basically hide the overflow on smaller screens when the movie appears on the end user's monitor. I can't get it to center, however, as it always just wants to align to the left. I don't want to use the 100% feature because that distorts the movie.
I've tried using the "overflow: hidden; text-align: center;" CSS feature, to no avail. Is there a way in CSS to make this work? Do I need to use javascript or something? If so, which script do I use?
I have a Flash page that is a bit off center on smaller resolution screens. If the site was centered, and the sides were cut off, then all would be well. But the site starts in the top-left corner, so some content is clipped. I know the problem can be solved in JavaScript, but I'm wondering if there is a more elegant, possibly CSS-way,
View 2 RepliesI have a full flash website built using Flash (of course). So I publish it using flash itself. But I am having a difficult time aligning it in center with its original dimension. I dun want my swf stretch out or scale at all. I want to display it without scaling and also in the center of the browser window.
stage.scaleMode = StageScaleMode.SHOW_ALL;
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP;
I did try these and also tried changing my publish settings but didn't work.
[URL].. Anyone know the AS to make it automatically check the size of the browser for the listeners_notice when you resize the browser it works perfectly...but not when it first loads up.
[Code]...
I have this flash website where i use Stage.scaleMode to dynamically resize the swf depending on the browser size. (i use A.script 2.0). So the width takes the whole screen and the height is scaled in proportion. My design is in a landscape format. It works fine, except that i need the swf to also be vertically centered in the browser Window. (explanantion - on certain screens, example a 19 inch PC monitor which is quite "squared", my flash movie expands the whole way across the width, and the height in proportion, but as my design is in landscape, i have a big empty space in the browser below the swf.)
This is how it is: This is how it should be:
Here is the code:
stop();
Stage.scaleMode = "noScale"
Stage.align = "TL";
[Code].....
We have recently made a new Flash website for our company (URL...). The Flash module itself is 800 pixels tall. We have CSS that centers a div horizontally and vertically that's wrapped around the Flash module (you can see the source of URL...) and when someone is on a browser on a netbook or a smaller laptop (sub 15-inch, generally), they don't have enough vertical resolution (after the real estate used by the Windows start bar and browser toolbars) to see the entire site.Whether you view the html page I've made (again, at URL...) or you view the Flash module itself (URL...) the top of the Flash module clips off the top of the browser. (To see the problem if you don't have a small laptop, just don't maximize your browser window and shrink it's vertical height.)I understand why my CSS is behaving the way it is, due to the nature of the negative top margin, but is there any way to solve this issue?
View 1 RepliesI would like to have a project where the background fits the whole window (can squeeze) and the content is automatically resized and centered; keeping its ratio.Auto-Resizing and Centering your Content But here's my problem :
My main project is 1400*900px.
My MC to handle is 1000*680px.
I load an external SWF in that MC (with addChild).This external SWF is 1000*680px too (same size than parent).I have a lot of clips in my external SWF and some of them are "out" the project zone.So when I load it in my MC; the MC is no more 1000*680 but more.I thought that what was outside didn't matter; but it seems that flash do not ignore what is out.So, when I use the code to resize/recenter the MC; it broke as it do not center as it should.I did try to use masks but it do the same.
I am working in Flash CS3 and Actionscript 3.0 My application resizes according to browser width and height. If the user first resizes the browser and then loads the flash application, I could not get the full browser width untill the user goes for full screen. Is there any way around, to get the full browser width before the user goes for full screen.
View 1 RepliesI'm working on a small flash site and I want the swf file to have "bleed" or to go to the very end of the window so that the swf isn't just ploped over top of a background. [URL]
View 1 Replies- How can I center my main SWF inside the browser without stretching the the swf? I just want it to be center both horizontal and vertical when you resize the browser.
- I found some tutorials but it is only referring to just ONE movieclip. What if I want to center the whole stage? Is there any other way to call the stage that has content in it?
I'm trying to center an swf in a browser without using table width and height 100% and the most promising way i've found so far is to set
Stage.scaleMode = "noscale";
in the first frame and then set the width and height of the object tag in the html to 100%. However, i'm having trouble getting this to work with the doctype in some newer browsers.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
[Code]....
I have some questions about centerting your SWF inside a browser using actionscript 3.0.
- How can I center my main SWF inside the browser without stretching the the swf? I just want it to be center both horizontal and vertical when you resize the browser.
- I found some tutorials but it is only referring to just ONE movieclip. What if I want to center the whole stage? Is there any other way to call the stage that has content in it?
I'm trying to center an swf in a browser without using table width and height 100% and the most promising way i've found so far is to set Stage.scaleMode = "noscale";in the first frame and then set the width and height of the object tag in the html to 100%. However, i'm having trouble getting this to work with the doctype in some newer browsers.[code]
View 3 Replieshow to horizontally and vertically center a browser pop-up window in Flash? Below is the code tied to my Flash button:
on (release) { getURL("javascript:openNewWindow('http://www.blahblahblah.com','thewin','height=300,width=400,toolbar=no ,location=no,menubar=no,status=no,scrollbars=yes') ");}
[Code].....
I've just finished building a website with a fluid layout. When I tried it in the browser, it's not centered. I tried adding <center> </center> tags to the body of the HTML page but this didn't work... so how can I fix it?
View 7 RepliesI've just finished building a website with a fluid layout. When I tried it in the browser, it's not centered. I tried adding <center> </center> tags to the body of the HTML page but this didn't work.
View 1 RepliesI am working on a flash website which needs to be fluid layout. The background image is resizingperfectly fine when the browser is re-sized.I have also managed to make the logo centre on re-size. My problem is with the two other movie clips which both have other mc inside.My content is residing inside a movie clip called "content_mc" inside the content_mc I have other movie clips with AS. I have tried using the same line of AS I used to centre the logo on "x" but the content disappears of the screen on run time!I thought maybe I am doing something wrong in the math. Note my content_mc it is positioned at x= -1620 and y= 270 W= 900 H= 7412. Here is the AS I use to resize the bg img and to centre the logo_mc
Code: Select all// background image resize..//
function init()
{
[code]....
how i canter my website like lostinbeta.com, beck.com etc. Right now whatever i do, dreamweaver positions my flash site in the top left corner of the browser, save the small border on the top and left,
View 3 RepliesI have a standalone Flash projector running off CD. Currently, I use
getURL("http:url....);
to open the page on default browser. Only problem is the browser window is opening at the size it was last used. I like to see it opens full screen.
I seen alot in many sites. Full screen flash site with objects in the site centering or their predestined position as browser scales.
View 3 RepliesI've just followed the tutorial "Full browser flash" URL...I've got it setup so everything will be inside of the "centered" movieclip. view it here: URL...BUt I can't seem to get my preloader included in the centered movieclip.[code]Basic, but it works on the main timeline just not in movieclip. Something I need to change?
View 2 RepliesI've seen the Full Browser Flash video which has tiling in the background. Can somebody supply code, and possibly an example of how to have one scalable image as the background without distortion whilst the foreground flash remains the same size. the site below is exactly what i'm after with the menu fixed to the left.
[URL]
Is it also possible to have the menu bar a fixed percentage from the top of the browser?e.
having some problems with having my mc's always center in t5he middle of the browser window even when it resizes??
Cheers all,
basically the code i'm using is this:
_root.abc.Stage.width/2;
[code].....
I am making full browser page, but resize doesnt work well. It looks like the flash took wrong stageWidth and stageHeight at the start... Then it all works but with wrong numbers [URL] (when you launch swf in standalone player, it works well - download [URL]
[Code]....
I was checking out flash templates looking for inspiration, when I ran across this template.If you open the link, you'll see a button on the right side of the flash file which allows for full screen display. There are no browser elements visible at all.
View 1 Replies