I've got a game where I need the enemys to hitTest with each other, I'm going to have copys of 3 types of enemys on the stage, instead of giving them all an instance name is it possible to hittest from the libary because I've given them instance names in the library of "enemya" "enemyb" "enemyc"
I have a question regarding hittest object in actionscript 3. When using events, you can check what the current target is by using e.target or e.currenttarget. I was wondering how this achievable by hittesting?since hittests are not a function.
I need to retrieve info about the hittested object.Here is an example to make it more clear:
ActionScript Code: if(movieclip1.hitTestObject(movieclip2)){ textfield.text = "this is information selected by the hittest: " + channel[e.target.name].item; }
I'm working on a project and using hittest to navigate. So it's pretty important haha.
I have a movieclip named Map linked to a class named Map. Inside of the movieclip I have 3 instances of a movieClip hitbox. they are named block0, block1, block2. What I'm trying to do is add them to an array using a for loop. Then in my player class I use another for loop to hitTest against the array. What I'm getting tho is this error:
Code: TypeError: Error #1034: Type Coercion failed: cannot convert []@2393159 to flash.display.DisplayObject. at xxx::Player/loop()[Player.as:54] The code from Player.as that the error refers to is here:
I created a .PNG in Photoshop (see attachment) -- now when I make this into a movieclip the bounding box covers the entire area so the hittest activates as soon as my helicopter flies into the bounding box.I looked at adobe's "help" they recommended this code (by the way, I'm using Flash 8):
my_mc.hitTest(x, y, shapeFlag ) my_mc.hitTest(target)
I read somewhere that you only use one of the two, and the shapeFlag one is the one to use.The above code I placed into the helicopter MC (named heli) - I set the x & y to where the PNG is.The PNG moves towards the helicopter, so I'm not sure if that makes a difference.I just want that if the helicopter runs into the ceiling or floor, the level resets.However my current actions activate as soon as it hits the bounding box.This is my code in the PNG:
iv gotten hittest to work on me and my friends sites, but with olny one button for the MC to check for. Very simply, how do i get it to check for 2 or more?
I have a tile-based platformer game under work, and I'm stuck on a problem with hitTesting:
//check all character collisions with levelHolder for(var i:int = 0; i < levelHolder.numChildren; i++) {
[Code].....
The problem here is that hitBlock only hitTests one block at a time, and when I test this: If you lean on a wall (press right arrow key) and go downwards you can go through the floor.
I need to make it so that I can test on multiple blocks at a time.
And I did try to replace hitBlock with levelHolder[i], but it gave an error saying:
ReferenceError: Error #1069: Property 0 not found on flash.display.Sprite and there is no default value. at Main/enterFrame()
I'm guessing that comes from the level array where 0 = blank block / empty space.
At first I had all my sprites in an array and cycled through them to detect for collisions but now I am trying to put them in 1 big sprite and testing just that. I don't know if I am doing something wrong or this is to be expected but testing for 1 big sprite creates lag within the engine. Am I correct to assume that it's because I am constantly testing the pixels of the 1 sprite? When cycling through the sprites individually i never noticed this lag.
I am trying to make a basic game, and have read all about bitmaps, but they have only confused me, so I am trying to succeed with a more flawed, but basic approach. I couldn't find any comprehensible tutorials on this, so I've tried it on my own, but it doesn't work.Basically I have my character in a movie clip connected to a class, and it is spawned when the movie starts, just like the "wall" class here. It populates the stage with a line of boxes, but my problem is that the hittesting only works on the first one.[code]
I thought maybe I had to use localToGlobal, but they are on the same layer, so it can't be that. It works on the root frame, just not in the movieclip.
I'm just learning so I'm sure I'm making many stupid errors. How do you hitTest 2 separate arrays of different lengths, all entries against one another . Code below for guidance.
I'm making a game where your character must touch rings (big ovals) that are moving up and down with a motion tween (with easing). I attach these movies and push them into an array. For the hittesting, nothing is accurate. Since a movieclip inside the ring movieclip is moving up and down, the boundary box is much bigger than it should be when hittesting. If I use the x/y method, it triggers the hittest when my character is in line with the reference point. It should trigger when the middle of the character hits around the middle of the ring.
What I'm trying to do is hittest two irregularly shaped objects using their alphas and not the bounding box.
The code below hittests two objects named target 1 & target 2. This is not my code, but mine looks exactly alike, except target 1 & target 2 are replaced with my MC's. the thing is, I keep getting an error.At every function line, like the "public static function complexHitTestObject I get an error that says: Expecting right paren before left-bracket. I don't know what this error is caused by, because I can't really see why Flash wants another right paren.
im having a really frustrating problem. I have 6 movieclips on the stage, all acting as 'map areas', these are named area1_mc, area2_mc and so on.. I then have a car which i drive around the screen, this instance name is car_mc ... All i want to do is do a HitTest to determine if the car is on one of the 6 areas.. i have the following
[Code]...
The reason it is not working i think is it is expecting the car to be on ALL map areas in order for it to be "on map". For example if the car is in the middle of area1_mc, i get three traces. On map (refferign to it being on area1_mc) then two traces of 'off map', because it obviously isnt on area2_mc or area3_mc.
I have 4 ball movie clips, a playhead and four target movieclips called mc_1-4, the array, (my_array), has 4 elements, which are each defined as having values of 0: I have a hitTest set up that will trace my_array to the output window each time it hits mc_1, to see what is happening. However the hitTest prints the array 3 times?
Am i right in thinking that this is because the hitTest is being triggered on entry of mc_1 in the center and upon exit?I need to make this hitTest be triggered once when the hitTest passes the center of mc_1. Secondly if any of the balls have been dragged and dropped on to mc_1 i want the array value with an index of 0, to change to 100 from 0 (not in terms of its index position because my array is only 4 elements long, in terms of its actual value) which i have tried to implement but i cannot configure the right code.
1. hit tests that only trigger once when they pass through the center of the object thus tracing one array.
2.use the balls 1-4 to make the array index 0, have a value of 100 if they are in contact with mc_1.
This is sort of a multi-layered question- I have a movie clip that I sectioned off in quadrants:The red dot is the player, the stage is the size of one square. My goal is to, when the player moves to either of the 4 edges, the next section of the quadrant comes up (meaning if the player moves to the right edge, the section that borders the right edge will slide on screen, and the old section will slide off screen).I was wondering if there was a way to hitTest if an object is touching any part of the edges? Is the hitTestPoint method something I should look into? What I have so far is an object off screen (black rectangle), that when the player touches the quadrants slide like I want them to (at least I'm trying to make that work).Here is my code. I know some of it's wrong and/or I'm missing something.
if(leftKeyIsDown && player_mc.x > -15) //-15 is half the size of the temporary player_mc {
I am working in two different applications, one to be compiled for desktop use (AIR) and one to be compiled for the web. They are part of the same project and use the same visual components, but they are completely different apps. When a visual component is changed in one application then it should also change in the other one. Is this a good situation to use a shared library fla? I am new to the concept of shared libraries and I am considering the options.
On one had I would not have to update 2 applications everytime I change something, on the other, I would always have to recompile the library folder when I do the smallest changes to a component.
I've got a simple question. Suppose some simple lib written on c. Did I understood correctly that alchemy compiles it AS3 before compiling it to swf. If so, will the lib be slower or faster in comparison with the same lib written on AS3.
I am making a flash app where I want to have a user defined viewport like the stage in the flash IDE which the user can use to define objects that have a starting postition somerwhere off or on the stage and an ending position either or on or off the stage with the object then tweening between the two points. My question is this: I want the user to be able to define a curved path for the object to tween along. Is there a library of code that I can use to define curved paths for the app?
Ideally I would like something similar to the functionality available in Flash, so a bezier curve sort of path that is subdivided into handles that can be dragged to define the path of the tween. If there isn't an existing library, then do you know of the functions that I would need to define (mathematical equations related to drawing curves etc)?
In my child swf I am using the sound from library with "attachSound". I also use the play/pause button controls of this sound alongwith the other animation.Now when I load this into my main swf file with "loadMovie", It plays fine but no sound. I found that this is due to no sound linkage in my main file library.I want to share my child swf's library with main file's library.
As one would expect, Classes within my RSL can access the classes and methods of the embedded swcs. In other words, classes in my library can for instance call import org.alivepdf.Print and then call AlivePDF's Print.print() method. But it there any way for my project to also use those third-party classes and methods, by "tunnelling through" my RSL??? Even though my project is using my RSL, when I try to type out org.alivepdf.Print it cannot be found.(Obviously I can make a manager class in the library to "pass through" specific commands to the embedded swcs; I'm looking for something a little more generic and all-encompassing here).
Library symbol "Card" is linked to class "Card" which extends "MovieClip". Library symbol "Card" contains a card background image.Library symbol "Ace" is linked to class "Ace", which extends class "Card". Library symbol "Ace" contains a TextField with a big letter "A".So we have Ace extends Card which extends MovieClip. Ace therefore extends MovieClip, but does not DIRECTLY extend MovieClip.When I drop an instance of Ace on the stage and compile the clip, all that shows up is the big letter A. However, I expected the background image from Card to be included, since Ace extends Card, and the Card symbol contains the background.It seems like Flash ignores symbol content unless it belongs to the top-level class being instantiated.I think it's LAME that one symbol can't extend another. The IDE could easily draw Card as a non-editable background while I'm editing Ace which extends it, and it should instantiate Card's content and then Ace's content when an Ace is instantiated.
When you open the Library panel and then my a new library so like you have 2 on the screen now pretty helpful if you want to open an external and have your current project open and drag and drop right. But here is the part I don't understand you have your 2 panels open now and every time you open your Library panel 2 pop up instead of one. God forbid if you every opened like 4 or 5 of these free floating Library panels I already have 3 going and there up there. is there a way to have all your open your Library panel with out having multiple un-needed Library opening along with the one you want?
In my child swf I am using the sound from library with "attachSound". I also use the play/pause button controls of this sound alongwith the other animation.
Now when I load this into my main swf file with "loadMovie", It plays fine but no sound. I found that this is due to no sound linkage in my main file library.
