I got this code but when i click on another button is is still there how do i get it to disappear? I have two movieclip one is the snow and another movieclip is an empty mc called snow2
ActionScript Code:
i =0;
while (i<25) {
//duplicateMovieClip (dot, "dot" +i, i);
dot.duplicateMovieClip("snow"+i, i);
i++;
[Code].....
I just did a button and 3 movieclips. What i want? Well, when i click on the button to change the movieclips. click 1 = movieclip 1 when i click again on the button it change to movieclip 2 My problem is that i can`t make so it can change to movieclip 3.So when i click it must be something like this> click 1 = movieclip1, click 2 = movieclip2, click 3 = movieclip 3 so on...
[Code]...
In my scene, I have five buttons and each one will start a movie clip within the scene.o, I have only one frame for the entire scene( but four layers: button,background(with music), action and my last one is animation.Each time a click a button( with onPress or onRelease actionscript 2.0.), a movie clip starts(that's ok..)But, when I click an another button, I want the previous movieclip to stop and disappear. In my case, the new movieclip starts but over the last one who is still there.Furthermore, when I want to click on a button that had already been pressed, I want him to start over his movieclip. For now, I need to press it once again to cancel his movieclip and then press it again to start his clip.In resumé, all I want is that each time I press a button, the last movie clip disappear because the new one starts and an already been pushed button, when pushed again, starts his movie clip without the need of pushing it to cancel his first operation and then pushed it again.
View 5 RepliesBasically, I have a button and on click it displays a menu. I want to click that menu a second time and the menu closes. Currently, every time you click the button, the menu reopens. I pasted the Flex livedoc example below. If you click the button, the menu keeps reopening.Now, I rigged it up by setting a var to open and closed, so when clicking the button it does a check. However, if you click away from the screen, the HIDE event gets dispatched, and the menu closes. This messed up the open close var being set.
How could I make this Flex example below show the menu on button click, and then on a second button click, it closes the menu? Take into affect that if you click away from the menu, it closes it.Also, I played around with the MOUSE_DOWN_OUTSIDE event for the button and set the preventDefault, and the FlexMouseEvent event.cancelable is set to false.Changing to a PopUpMenuButton is not an option. I have to much skinning involved.Here is the Flex example:
<mx:Script>
<![CDATA[
// Import the Menu control.
import mx.controls.Menu;
[code]....
I have a script that once clicked ( a button ) some other thing hides then once clicked again it re-shows. the problem is once hidden it never shows again here is the script:
menu_start.addEventListener(MouseEvent.CLICK, myClickFunction);
function myClickFunction(event:MouseEvent) {
// Hide the first and show the next here
if (menu_menu.visible == true){
menu_menu.visible = false;
} if (menu_menu.visible == false) {
menu_menu.visible == true;
}}
make an graphic (just a box with text in it) be shown as default, then when the user clicks (either clicks the box or anywhere or a cross - anything!) the window is hidden, then if the user wants to see the box again, they can click a button saying 'show info'.
And I looked on the forums and found ( showthread.php3?t=66284" ) << I can't post links because my post count is too low .
But I tried that (both methods mentioned) and i can't seem to get them to do anything?
is there a way to hide/show layers on the click on a button?
View 2 RepliesBasic problem here. I'm adding a bunch of movieclips using the addChild method. I simply want to remove/hide/fade them after a button click, but I am unsure of how to refer to the movieclips which I've just added.
Here is the code as it stands:
Code: Select allimport gs.TweenLite;
import gs.easing.*;
var strip:Bgstrip;
var contentBg:ContentBg = new ContentBg();
contentBg.x = 440;
contentBg.y = 166;
addChild(contentBg);
[Code] .....
I have a movieClip that a user can click on to hide/show a different movieClip (for this example, lets say its a circle). I have an 'onPress' on that movieClip that tells it go and play the next frame inside itself movieclip (there are two frames which just have different graphics to represent off/on) and also the line of code to hide the other movieClip.
The problem is that if a user clicks on the movieClip to hide the circle and then keeps their mouse in the exact same position and tries to click again to show the circle, nothing happens... they have to move the mouse at least a little bit before it will recognize it is being clicked again. The same thing happens with buttons I have that scroll the page... which is extremely annoying since you can't just click the same spot multiple times, you have to move your mouse a bit and then click again.
I'm trying to hide my button once my MovieClip is invoked so that it will not appear behind the MovieClip?
The code I have written to get the MovieClip to play is:
[code]...
What is the syntax that I use hide my button (button_mc) while the MovieClip is playing and have it reappear once the MovieClip is finished playing? Should the syntax appear after my ending bracket or before?
I want a button to show and hide a movieclip (see attached files for source) the Button is a Movieclip and has been coded using a tut I got from some where but I am stuck on how I can get it to do the show and hide part <edited part> forgot to Add that I also want to make a Text box say Grid On and off
[Code]...
I've been looking on google, but I have found nothing at all on this, which is surprising as it is very simple to make (I have done it in AS2).I was to have a button that can hide a movieclip. Then another button which will show it again.
View 8 RepliesI am building a flash interface and I would like a menu where it is hidden to begin with (just a tab). You click the tab to expand it, and click again to collapse it. I've made a movieclip with animation of the menu opening up and closing, but I can't seem to work out how I'd go about making the movieclip open and close properly.
View 4 RepliesHiding Button on Main Timeline from inside separate Movieclip
View 1 Replies[Code]....
I'm stucked here. I want the font type "BauhausMedium" to apply when ft_01 is clicked, font type "Haettenschweiler" to apply when ft_02 is clicked, etc... at the same time I want all" ft_01a", "ft_02a", "ft_03a" movieclips to hide except for the movieclip similar to the clicked button. E.g. if "ft_02" was clicked ft_02a to be visible =true and rest to be visible = false (ft_01a, ft_03a).
I was just wondering why it is that after I have clicked a button to run a movieclip, I have to click it twice to run it again? I would like to be able to run it again with just one click - it is for a true and false set of questions. The movieclip is an animation that runs if correct (and there is another if it is incorrect.
Here is the button script
on (release) {
_root.tf1_mc._visible=false;
_root.tf2_mc._visible=true;
_root.tf2_mc.gotoAndPlay(1);
}
comment: tf1_mc runs when the true button is clicked and tf2_mc runs when the false button is clicked. The script above is for the false button
I have a Movie Clip configured as a Button and I wanted to know how to make the cursor transform into a pointer (little hand) when it's over tat movieclipBut well that was just not the point of the Post what really interests me is that when I click that MC a Pop up menu appears (another MC) but if i decide not to click any of the buttons in that menu the menu will stay there until I click another button or something and i will want it to disappear if a click it for a second time or something like that.
View 1 RepliesI have made a sort of drop down menu of a movieclip. There are actually two, the first one named list_over_mc is only to detect when the mouse is in the area for when to drop down the menu (onRollOver) and the other one, list_mc, is holding the menu itself. The problem is that when the menu is down nothing happens when I click the button (now named knapp1_btn). I have tried with another but with the same sort of script (but placed outside of the movieclip list_over_mc) and that works so I'm guessing it is because the button is "over" the other movieclip.
View 3 RepliesI'm almost 100% sure that I have to write an if, else statement for this. Below is the code I have for a button(movieclip) I created. It is suppose to play an animation when you click on it. Then when you click it again it's suppose to play a second animation that will take it back to the original state. What is happening is, it goes straight to the clicked state without playing the animation. However when you click the second time it plays the animation that takes you back to the original state. Am I correct in believing the only way to get the animation to play on both clicks is to use an if, else statement.
function clickPlus(event:MouseEvent):void {btn1.gotoAndPlay("clickOpen"); }btn1.addEventListener(MouseEvent.CLICK, clickPlus);
function clickX(event:MouseEvent):void {btn1.gotoAndPlay("clickClose"); }btn1.addEventListener(MouseEvent.CLICK, clickX);
btn1.removeEventListener(MouseEvent.CLICK, clickPlus);
I have browse button on stage. when i click this i am uploading a image to a movieclip. then the movieclip is added to the stage. my issue is when i click the browse button 2nd time i need to select another image and add to another movieclip and display it to the stage
View 2 Repliespublic function mc1():Void {
for (i=0; i<9; i++) {
c = c+30;
//here my_clip is a refrence to stage
var mc_new = my_clip.attachMovie("mc_bread", "bread_"+i, my_clip.getNextHighestDepth()+1, {_x:80, _y:385-c});
mc_new._visible = false;
[Code] ......
See the function visibility I am trying to set visible a movieclip on a click of a button. this code gives no error but still movie clip is not visible.
I am building a navigation menu with buttons that call and show a movieclip just below the button. I have no more compiler or output errors. Despite this, I still dont have a working navigation menu.The movieclips are only found in the library and are being called by buttons on the timeline. I currently have all the actionscript on frame 1 on a separate layer of the main timeline. None of the buttons or movieclips have code associated with them individually.The code I have created is as follows (I omited some bc the functions get repetitious).
Code:
stop()
va html_con_mc = new MovieClip
[code].....
Before telling you my problem in actionscript, I would like to explain on how the system works. Please bear with my long explanations.I have a list of data that need to be display out. I've created one movieclip and I named it table_mc. Inside the table_mc, I put 2 dynamic text and one blue box with alpha 0. In order to display a list of data out, I used a table component in flash to duplicate the movieclip, table_mc. It saved me from doing a "for loop".
I wanted the list of data to be clickable so I converted the 2 dynamic text in table_mc, into movieclip. I named it table_but. When I clicked onto table_but, the blue box will appear, alpha 100 to show that it is being clicked.Here's the problem. I've done an actionscript in table_mc. In the list example, when i clicked onto no '2', the blue box appear and if I clicked onto no '5' the blue box for no '2' should disappear. Unfortunately the blue boxes will appear there together when i clicked onto no '2', '5' and '7' because they shared the same movieclip table_mc. Is there a way to do it when the blue box can only appear at a time?
how to play a movieclip on button click in actionscript 2.0.
View 3 RepliesI put a mcBtn in the end game frame, put this code in the frame:
mcBtn.buttonMode = true;
mcBtn.addEventListener(MouseEvent.CLICK, playGame);
function playGame(e:Event):void {
play:(1);
}
The object is to go to frame 1 when you press mcBtn. When I click it, Nothing.
What AS should I use to get a movieclip bigger when I click a Buttom? I want the object to grow at a size "x" and then stop....
View 7 Repliesi CAN'T CLICK on any button, movieclip layer and have actionscript work, it just says "CURRENT SELECTION CANNOT HAVE ACTIONS APPLIED TO IT" what do i have to do so that i can click on my button's and go in action pannel and be able to input my actions without it saying "CURRENT SELECTION CANNOT HAVE ACTIONS APPLIED TO IT"
View 4 RepliesI have a button on the stage which works fine and performs various actions. I have a movie clip on the stage, that contains 10 different buttons which when you click advances you to the next button and does different things and so on and so on. Again independantly this movie clip with buttons works fine.
What I want to do however is this. I want to click on the main button on the stage, have that 'click' replicated to the other button within the movieclip so I can action both with a single clip.
I am creating a library like flash file for our game. I am using adobe flash cs5 with as3 and adobe indesign. I am still very new at flash(a real newbie) and i am wondering if anyone could help me in my problem.
i have a movieclip file named "mainPage". mainPage contains 6 buttons (with a cyrstal design) but lets focus only on 1 button. The 1st button contains the name Art_btn which calls the movieclip artBook when the button is clicked (which is my problem) . I have another movieclip named "artBook". the contents in my artBook are separated or written on each frames that could be called when clicked next or prev.
here is my prob. i dont know what is the right code that would call for artBook when Art_btn is clicked.i tried inserting codes such as loadMovie, gotoAndPlay and addChild but when I test it, the mainPage contents doesnt show up and it produces errors.
[Code]...
It used to happen in AS2.0 as follows :
my_Mc.onPress = function()
{
trace( this)
}
//output :
[my_Mc Movieclip]
[Code]...