I'm trying to hide my button once my MovieClip is invoked so that it will not appear behind the MovieClip?
The code I have written to get the MovieClip to play is:
[code]...
What is the syntax that I use hide my button (button_mc) while the MovieClip is playing and have it reappear once the MovieClip is finished playing? Should the syntax appear after my ending bracket or before?
I got this code but when i click on another button is is still there how do i get it to disappear? I have two movieclip one is the snow and another movieclip is an empty mc called snow2
ActionScript Code:
i =0;
while (i<25) {
//duplicateMovieClip (dot, "dot" +i, i);
dot.duplicateMovieClip("snow"+i, i);
i++;
[Code].....
I want a button to show and hide a movieclip (see attached files for source) the Button is a Movieclip and has been coded using a tut I got from some where but I am stuck on how I can get it to do the show and hide part <edited part> forgot to Add that I also want to make a Text box say Grid On and off
[Code]...
I've been looking on google, but I have found nothing at all on this, which is surprising as it is very simple to make (I have done it in AS2).I was to have a button that can hide a movieclip. Then another button which will show it again.
View 8 RepliesI just did a button and 3 movieclips. What i want? Well, when i click on the button to change the movieclips. click 1 = movieclip 1 when i click again on the button it change to movieclip 2 My problem is that i can`t make so it can change to movieclip 3.So when i click it must be something like this> click 1 = movieclip1, click 2 = movieclip2, click 3 = movieclip 3 so on...
[Code]...
I am trying to capture the event; which is invoked when we close the AIR window by clicking its Close button (on the top-right corner). I have tried the following; but none of them seems invoked:
[Code]...
In my scene, I have five buttons and each one will start a movie clip within the scene.o, I have only one frame for the entire scene( but four layers: button,background(with music), action and my last one is animation.Each time a click a button( with onPress or onRelease actionscript 2.0.), a movie clip starts(that's ok..)But, when I click an another button, I want the previous movieclip to stop and disappear. In my case, the new movieclip starts but over the last one who is still there.Furthermore, when I want to click on a button that had already been pressed, I want him to start over his movieclip. For now, I need to press it once again to cancel his movieclip and then press it again to start his clip.In resumé, all I want is that each time I press a button, the last movie clip disappear because the new one starts and an already been pushed button, when pushed again, starts his movie clip without the need of pushing it to cancel his first operation and then pushed it again.
View 5 RepliesHiding Button on Main Timeline from inside separate Movieclip
View 1 RepliesI am making a flash application and I am trying to find function to use when I press the close button of the projector window. I dont want to make a button that uses fscommand("quit") since this would be impractical knowing that a default close button on the window is already available. Anyway the purpose of the function is that when I close my application, a dialog box/message would appear as a reminder that some data has not yet been saved and give the user an option to save or quit the application.
View 2 Replies[Code]....
I'm stucked here. I want the font type "BauhausMedium" to apply when ft_01 is clicked, font type "Haettenschweiler" to apply when ft_02 is clicked, etc... at the same time I want all" ft_01a", "ft_02a", "ft_03a" movieclips to hide except for the movieclip similar to the clicked button. E.g. if "ft_02" was clicked ft_02a to be visible =true and rest to be visible = false (ft_01a, ft_03a).
hide movieclip A when a loaded swf B overlaps that movieclip? movieclip A = level0. loaded swf B = level1
View 3 RepliesI am using actionscript 3 to make a point and click game. On frame 1 there are two buttons, button 1 and 2. On frame 3 there are two buttons, button A and B. I want it so that after I click button 1 on frame 1, button A on frame 3 will be hidden or when I click button 2 on frame 1, button B on frame 3 will be hidden. The buttons that are hidden do not do anything when you click them.
View 2 RepliesWhat can I call from within Flex/AS3 that will tell me whether the flex-app/web page is being executed within the local file system or rather was served from a webserver (either localhost or some remote server). Hopefully that's clear. If there's something in Javascript that's acceptable, but some AS3 function would of course be preferable.
View 2 RepliesI will have to explain this in steps. I have a flash website, inside it I have the content on frame 2 (frame 1 = preloader) from there I have a content_mc which holds my pages. I have a home page (frame labeled home) which inside displays the home_mc. In here I have inserted a flvPlayback component. Here's where the problem is. I have moved a stop and volume component on it as wel which has automatically linked up (which is nice). But I would like when I click the stop button, the video disappears. The videoPlayback is called "introVid", the instance name is "vid", and is residing within the "home" mc.
I know the code is something like:
this.visible = false;
or
movieclip(root).home.vid/introVid.visible = false;
or I have also seen people using visibility = false...
However I cannot find out how to link this with the flvPlayback Stop button component. Inside the button all I can find is: The 4 button states,
some code on stop button itself:
stop();
this.upLinkageID="StopButtonNormal";
this.overLinkageID="StopButtonOver";
this.downLinkageID="StopButtonDown";
this.disabledLinkageID="StopButtonDisabled";
I require to put my actionscript on the press or release, but I cannot find out to do this, I assume the code at the moment is calling a "flash component class" which holds the actions for "stopButtonDown" or something, I did have a go at manually creating a mc and a button, and making that stop the flvPlayback, and hiding the movieClip, but with no luck.
I have different layers and different movieclip in the stage and when the movieClip is clicked it load the external movieclip.[code]...
View 4 RepliesI know you can do this to hide a movieclip:[code]how would i go about hiding say only the tophalf of the movieclip? I have tried using the Rectangle function to try and draw the section i want to be displayed, however with no result.
View 2 RepliesI have a button called myBtn.
In my actions in Frame 1, I have tried both[code]...
A flex app running in a view of my .NET MVC app can load data fine from another route, but submitting data via either POST or GET never invokes the controller action. Interestingly, the only way I can get the action method to fire is by passing intentionally malformed post variables in the http request. Odd. Content type is application/x-www-form-urlencoded and I have set authentication to "None" in web.config with no improvement.
View 1 RepliesWhen you export a release build of an air app, it creates an .AIR file, that you can then double-click. When you do so, it asks you if you want to "Add shortcut icon to my desktop" and "Start application after installation".
I need to call specific ActionScript within my AIR application if and only if it was launched by the installer (the 2nd checkbox was selected) - As opposed to the user re-running it from the start menu after having installed it.
How can I detect this within my program?
I'm making a Flash AS2 Dress-up game and I want to show/Hide movie clips on release of a button like this one;
View 1 RepliesThere is something I have been trying to figure out how to do, I keep running into needing a simpler bit of code to hide all the movieclips except the one that was just made visible. My only idea so far is to manually input all the movieclip names and tell them whether or not to be visible. It works, but it creates a lot of code and is time consumming to change. I hope there is a way to use just one or two lines of code and hide all but the currently selected movieclips.
View 9 Replieshow do i make a movieclip autohide? I would like to make the movieclip rise up from below when i rollover it. And when idle, it would return to the bottom.
View 9 Repliesan example of a show/hide a movieclip with a listener. That is, i was planning to have a boolean flag variable showSubMenu and if it's true the submenu will be visible and if false it's hidden???
View 2 RepliesSo I've been working on a Character class for platformer/ generic side-view style games. The problem is that i might need bits of characters to appear to go through other characters (i.e. char 1 grabs char 2 and runs char 2 through with weapon) the problem with this is that the characters' parts are contained in movieclips to run code on them holding them together and keeping me from having to position them just perfectly every frame in the IDE. it seems I have four choices:
1) Completely reprogram the display list -not practical
2) just hide the area of the movieclip that is intersecting with the other character
3) break apart the characters and merge them into an "interaction manager" movieclip
4) just give up.
I don't have the skills for option 1. Option 3 is ok i guess, but i'd rather try option 2 first. My biggest problem is that i have no idea how i would go about selecting just the intersecting part of the movieclip without reprogramming some part of the display list. If anyone can understand this, please give me something to point me in a direction.
I have a question about hiding a flash button. I have 2 buttons (one for muting and one for unmuting). When I click on the mute one, I want to make it so that it hides the mute one and makes the unmute button visible and vice-versa. I have tried using the ._alpha on release for actions but its not working. I also tried using ._visible.
View 3 RepliesI'm not happy with my hide/show function..... the code works, but I think it is a waste of space on my stage that I need two buttons to hide and show a movieclip... there must be a better way
[Code]...
I have a problem where I dispatch an event in a model class which is dispatched correctly. When trying to listen to this in the client, nothing is listened to. Client.as instantiates all MVC elements such as:[code]A user click invokes an 'update' method within 'BiosPanelModel.as' like so:[code]
View 1 RepliesI have a splash page.
I had a preloader which worked great before I added the sound (a WAV file) and I used attachSound.
Now the preloader doesn't work anymore!
I have tried putting the attachSound action on the main timeline, in the movieclip, in its own movie clip, EVERYWHERE! All to no avail.
I have a splash page. I had a preloader which worked great before I added the sound (a WAV file) and I used attachSound. Now the preloader doesn't work anymore! I have tried putting the attachSound action on the main timeline, in the movieclip, in its own movie clip, EVERYWHERE! All to no avail.
View 14 RepliesI am new to flash parameters but from the research I could find so far it seems that this should be fairly simple. I have a flash file that has a movie clip in it. In this movie clip there are two movie clips. What I need to do is show a one movie clip and hide another. I basically only need to set up the reading of the flash parameter code in flash...
var imageToShow:String;
var paramObj:Object = LoaderInfo(this.root.loaderInfo).parameters;
This is basically what I have... I'm not sure what to go on to next or if this is even correct.
Code:
if (parameter == "image1") {
image.image1.alpha = 1;
image.image2.alpha = 0;
}