ActionScript 2.0 :: How To Get Slider To Appear On Rollover
Oct 20, 2008
I have been working through this tutorial [URL] and have everything working pretty well but have two questions/problems:
1. Does this only work with buttons? I have tried to replace the buttons with MC and keep the same instance name but then it does not work - can I get this effect using movie clips instead of buttons?
2. How can I get the slider to appear on rollover (on any button) and then start its sliding effect as demonstrated?
View 2 Replies
Similar Posts:
Mar 13, 2009
how to stop on rollover this endless vertical slider in fixed centered position?
[Code].....
View 2 Replies
Jan 10, 2012
I'd like to build image slider like Nivo slider with Adobe Flash Builder.
i'd like to have image controls, image titles displayed above the image(like layers in flash). i'd like to read the data from xml.
i'd like to have nice transitions between images.
mayebe u can provide tutorial or source code.
View 1 Replies
Mar 25, 2010
What I have is a map that you can click on points and it will zoom in, you can also click on a "plus/minus" buttons to zoom in and out (I even have the mouse wheel zooming in and out). The client wanted me to add a "zoom slider bar" to it so you know you could move it up and down to scale it. Everything is working except the slider, I can't seem to get it to work with the position of the slider. All of the zoom functionality is there but the slider is killing me.
I am putting up the fla file since there is a lot of code in there and I didn't want to put it all in the forum. if you look in the fla in frame ten on line 726 you can find the function that is supposed to handle the zooming when you move the slider. Up on line 74 you can find the slider onPress and onRelease functions, but those I believe should be fine.
View 2 Replies
Dec 1, 2009
I am trying to create a basic timeline, similar to the timeline we all use in flash (see attached).
I have a playhead slider, which when dragged, just drags within its startDrag() limits.
I also have horizontal window scroller which also when dragged, just drags within its startDrag() limits.
I am trying to work out how to get the horizontal window scroller to scroll when the playhead slider hits the left or right edge. I am using hittest for this collision.
I have the playHeadSlider scrolling along the top. When playHeadSlider collides with hittestThing I want mcContents to then move.
It kind of works.. mcContents moves when the playHeadSlider is in collision with the hittestThing.. but it just moves rather than 'drags' across. I have it set up so that mcContents is twice the width (approx) of mcScrollWindow.
I need to somehow update what I have so that if the playHeadSlider collides with hittestThing on the right, mcContents only moves to the right and if playHeadSlider collides with hittestThing2 on the left, mcContents only moves to the left.
View 0 Replies
Jul 3, 2009
I'd like to make a circle slide ( Slider that on the shape of circle instead of vertical and horizontal Slider) like this one:
[URL]
Is there a ready Component on the web.
View 0 Replies
Feb 18, 2010
The script for my timer worked for one button but as soon as I set up the other 2 buttons to do the same, I started having a problem where the rollover action would go after the set amount of time was up but then would repeat itself once after the set amount of time was up again. just to clarify, if it needs it, the reason I don't have a rollout attached to these buttons is because I want the menu to stay out until you leave the menu area
so I have an invisible button called menuin_btn which sits to the right of the menu and covers the rest of the stage where the content will be, so you have to rollover that area for the menu to roll back in. The "rollin" in my code brings the movie clip to frame 16 (the end) where I have a gotoAndStop(1); command to get it back to frame 1 so the rollover can be used again. I've attached a zip with my current flash file and swf and here is what my current script looks like on the main scene:
[Code]...
View 3 Replies
Jan 22, 2005
I am making a ball move from left to right and back. but when I rollover twice quickly, it also accepts the second rollover command. I would like it to accept that second rollover only when the first one is finished. I mean, I want the first to be finished before it accepts another rollover.I know it is simple to solve this with a tween using frames instead of as, but I was wondering if someone knows how to adapt the script.
on(rollOver){
ballTween = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut,balMC._x, 44, .5, true);
ballTween.onMotionFinished = function() {
ballTweenterug = new mx.transitions.Tween(balMC, "_x", mx.transitions.easing.Regular.easeOut, 44,11.9, .5, true);
View 2 Replies
Jul 26, 2009
I'm using actionscript 1.0 and 2.0 on flash Pro 8 and keep getting an error when I test the movie. Here is the error:
[Code]...
I've tried to create this rollover navigation...starting over 6 times already. Is there different language / coding for 1.0 and 2.0? I don't understand what I'm doing wrong.
View 1 Replies
Jan 28, 2010
i wnat to show the message "Hi how are u" as a rollover message or a tooltip when i rollover the hyperlink Know More
View 1 Replies
Nov 13, 2009
I'm trying to create a rollover for a movie clip. On rollover, a line underlines the text,and when it rolls out, the underline reverses. This works fine the first time. The next time you rollover, the animation doesn't work. Then when you move the mouse off the button, a line appears under the text and doesn't go away. Here's my code on the invisible button.
on(rollOver){
this.gotoAndPlay("animIn");
}
[code].....
View 6 Replies
Jul 28, 2004
The animation/rollover works well but it still abruptly stops when I rollover another button. The link below is an example on what I want to accomplish.
View 1 Replies
Jul 15, 2009
I have a button set up, that when you rollover the button, it changes into another picture and stops, and also when it's rolled over, a large picture appears under the rollover.But when I first rollover the button, it acts like it's told to go to the out state. When I rollover it again it works fine.URl...there is my code to go into the movieclip and play the button
View 1 Replies
Mar 8, 2010
How do I do a onRollOver detect without using the onRollOver function?I have a movieclip and when it's rolled over I have it zooming using the AS2 tween function.In that movieclip there's a form with fields, and if I use the onRollOver function on the movieclip to zoom, the whole movieclip becomes a button thus preventing any input into the form fields. Is there an alternative I can use?
View 6 Replies
Jan 24, 2012
Okay, now things are getting a little complicated. I need to build a Flash object that can sit over the corner of an image to serve extra content. It's way beyond my Flash skill level, my work is usually limited to print work in Photoshop and Illustrator so please excuse me if any of the following isn't clear. I am trying to learn though, So this is how it's all supposed to work, along with my issues; When the image & Flash item load a small looping animation will play to draw the eye/show the item as interactive.
When the user rolls over this the corner will peelback. I have a working peelback animation for the rollover, that reacts to mouse over/mouse off, and a looping animation for the initial, but I cannot work out how to make the initial loop until mouseover, then play the peelback when the mouse is over. And go back to the initial animation loop if the user rolls off. (Each of these animations is stored as a movie clip in the Library)
Then it gets more complicated... if the user stays on the corner until it is fully peeled back I need to make a small countdown (sort of a 3, 2, 1 situation) show, before launching a lightbox (would this have to be jQuery, or could it be done in Flash?) in the browser to serve the content.
[Code]...
View 1 Replies
Mar 26, 2010
I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 Replies
Jun 6, 2010
Basically what I'm trying to do is build an interface out of a fan of cards. I've got the the whole fan as a movieclip and then individual movieclips of the cards inside that have rollover animations.My issue is the rollover works on the cards arranged behind the cards that have the cursor over, which I don't want to happen.e.g see attachment.here's the rollover actionscript i've got on each card:
onClipEvent (enterFrame) {
if (this.hitTest(_root._xmouse, _root._ymouse, true)) {
this.nextFrame();
[code].....
View 3 Replies
Oct 19, 2005
I am trying to figure out how to make a bottom bar similar to the one seen ontions inside the bar- here's what I've got so far:as you can see I have a date/time MC inside the bar_mc which is working fine but whenever I try to have a new rollover/rollout movieclip (or button) inside the bar_mc it won't work/won't show rollover animation.
View 1 Replies
Jun 21, 2010
I want to rollover a button and have it trigger the rollover state of another button. The buttons overlap. The one on top is transparent and smaller than the bottom button. So far I think I have the AS3 to handle the rollover of the top button, but I don't know how to trigger the other button's rollover state.
[Code]....
View 4 Replies
Feb 21, 2010
I have a horizontal bar that appears on a rollover - goes from a 0 alpha to 50%. In that horizontal bar are some thumbnails that I want to have some type of animated rollover action applied to them.The rollover action to make the bar appear overrides the thumbnail action - if I put the thumbnails on TOP (in the layers) of the bar then when I roll off of a thumbnail then I trigger the rolloff action on the grey bar.I simply want to make the horiz. bar appear - stay there while moused over - but at the same time I want to make the thumbnails animate when I rollover them while the bar is visible.
View 4 Replies
Sep 24, 2008
I would like to have a box and when you rollover it it slides down, and then a simple navigation appears that has it's own rollovers.[URL]I've even gone as far as when the mouse is over a certain area on the stage it calls the rollover function with no luck...How can I achieve this?
View 1 Replies
Jul 6, 2010
I have a button with a text in it called Test1.
I want to change the text of the button in Test2 on RollOver over this button which instance name is btn1.
Initially the color of text of button is black. I also want on rollover to change it to white.
[Code]...
View 2 Replies
Aug 18, 2009
I am just learning AS3, and have no idea whatsoever about the differences between 2 and 3. There is a bit of code from [URL] that I wanted to update to use AS3, but it was written in AS2. Here it is:
[Code]....
I get twelve total errors (there are six buttons with a slider next to them, and there are 2 types of errors). The first is: 1119: Access of possibly undefined property onPress through a reference with static type flash.display:SimpleButton. The other is 1120: Access of undefined property _root. The key parts of the code (I think) are the button names, and slider_mc., a little black square that slides up and down the height of the menu. All of the buttons are button symbols, each with a unique name. I read that to fix the 1119 error, I can convert them to movie clips, but then they no longer function as buttons (which is sort of the point).
View 2 Replies
Apr 22, 2010
I was wondering if anyone knew or could point me in the direction of a tutorial that will allow me to achieve this slider effect - but without using xml The effect is exactly what I need but on the particular network I need to upload to it doesn't seem to be able to load the images, I have tested it on other sites so know it is not a error.s there a way to achieve the same effect with the images already embeded in flash?
View 3 Replies
May 11, 2009
I'm a designer that inherited a project with a volume slider. I'm not that good with actionscript yet and haven't been able to figure out the code. The volume and slider starts at 100%, and I need it to start at 50%. Can you tell me how to set both the volume and slider at 50%? I'm sure it is a simple solution but I can't figure it out. I tried a few things but have not been able to get it to work correctly in both the volume level and start position for the sliderHere's the code on the 2nd frame of the mc:
Code:
stop();
var NiVol:Sound = new Sound(_root.Container);
[code].....
View 4 Replies
Aug 16, 2009
I apologize for being a newbie. I have been trying to figure out how to reverse an EKG movieclip to go from right to left instead of the direction it is currently moving:
View 16 Replies
Sep 2, 2009
[url]...Is this done purely in Flash CS4 or is another one of Adobe's products involved too?
View 2 Replies
Mar 1, 2012
Is it possible to add a slider to a datagrid. Basically, a column of sliders.
View 3 Replies
Aug 21, 2011
I apologize, the math must be too complicated for my right-brained mind. I've created a slider bar widget with a slider knob thingie who's start/stopDrag is restricted to 100px along the x axis.
I need to resize another movie clip from 25%-400% based on the slider's knob position.
I need slider(and respective MC) to start at 100% by default. I've started with something like this (below) but the math is wrong, and I can't figure out how to do this for the life of me.
[Code]...
View 3 Replies
Feb 28, 2006
First, when you download attache file, make sure that file will be in same directory(c: emp). in file test.fla in frame 5 in layer snowing is movie clip, name mcPoly. Now, load testing.swf and hit the movie button. The movie(test.swf) is load, now push the play button and wait until the snowing come, then press the pause botton, and you will see that the snowing keep snow.My questions is, how to stop the snow, when the pause button is press, and when you move the slider, where the snow is starting, the snow has to rest until the play button is press.
View 3 Replies
