ActionScript 2.0 :: Next Step In Learning OOP AS2 Programming?
Sep 21, 2009
I have been learning about classes and oop programming with AS2. I think I have a very good idea of how it all works, but I'm lacking in one final area before I can truly say I'm coding in OOP.Currently, I use a contentmanager class to route all button commands through. This class handles the removal and preperation of the stage for content change, and then seperate classes handle the actual loading and placement of the new content.So in a way, its not really OOP, just very well organized code.
The next step is Event Management in AS2. I know it can be done, I read through a few tutorials, but get confused by it all.What I'm looking for now is two things.. a very good Event Management tutorial or article if anyone knows of any..as well as a sample site that can be downloaded or viewed which has been written using OOP. I want this sample site, to re-evaluate how my current way of programming holds up compared to more proffessional examples...
(Perhaps even we can turn this into a hot thread with examples of code and structures to help other developers trying to gain a grip on OOP..?)
View 3 Replies
Similar Posts:
Oct 25, 2009
Any pointers where i could start learning flash programming. Also i would be really grateful if you could point me to place where i could get free templates for the programming
View 2 Replies
Nov 7, 2009
I have a flash template in Flash AS - 2 , with a initial sound that triggers at the very beginning in full sound. Now what I want to slowly mute the sound gradually step by step up to the loading of the home page. How can I do that? Worthless. I attached a very simple fla with sound. There is a stop action and at this point the home page is loaded.Now how can I mute the sound slowly upto this point.
View 5 Replies
Nov 7, 2009
I have a flash template in flash AS-2 with a initial sound that triggers at the very beginning.
Now what I want to slowly mute the sound gradually step by step up to the loading of the home page. How can I do that?
View 3 Replies
Feb 17, 2010
how to code is a small 12-step volume bar. For each increasing step a white dot should show, so when the volume reaches maximum 12 dots would be shown. Same goes for when the volume is decreased, each step will remove a dot (from right towards left) until the mimimum of 1 step is reached. To turn the volume up/down two buttons should be used, a "-" and "+". I'm not asking for a design or complete code, "just" a hint or walkthrough. Been trying for several hours now.
View 8 Replies
Oct 19, 2010
i am new to flex and need to learn how to use the flex builder 4 IDE is there a step by step tutorial to learn 2ndly i need to know about the following:
event model
validation cycle
display list
List-based controls, item renderers, AdvancedDataGrid, list interfaces
View 2 Replies
Apr 11, 2011
i apologize if this post is redundant. i'm searching unsuccessfully for recent, step-by-step instructions on how to set up ActionScript 3, Flex 4.5 and AIR 2.6 with TextMate on Mac OS X. i've found several posts concerning required bundles, but most of the threads are a few years old in addition to having convoluted, sparse instructions for setting up. it seems that auto-complete and .swc files are supported, which is great. in addition to instructions i'm also very interested in learning about what isn't supported and other common pitfalls.
i've been familiarizing myself with TextMate's UI and it's amazing. i would much rather use it than Flash Builder / Eclipse, or even Flash Professional. one last question - i understand that it's possible to set up our own keyboard shortcuts to compile with MXMLC and write the .swf to disk. is it possible to have the .swf auto open in Flash Player Debugger after it is compiled. essentially, i'd like to continue using Command+Enter shortcut for testing movies in Flash Professional to build and launch since i would certain have a difficult time adjusting to new muscle memory.
View 1 Replies
Apr 28, 2006
I�m mostly a beginner with flash actionscript. A site we advertise on asks me to embed a clicktag script to help them track the stats for each banner. I�ve read the directions on macromedia/adobe, I�m still a little confused. I have to make the whole banner clickable, so can I just create a movie clip on the top layer, make the alpha 0% and add this script to it to do so?:
on (release) {
getURL (clickTAG, "_blank");
}
I�m looking for more thoruough step by step instructions to ensure that whatever I hand over to them will work.
View 3 Replies
Mar 21, 2002
I would like to know if it is possible to control the property of movie clip with the enterframe event until it meets a particular condition then if it does another one.
1) My MC (this) of size 50% increases by 10% on enter frame until it reaches 150% of it's size
2) When it does reach 150% it then starts to shrink by -=10 until it gets to 100%
3) When it does get to 100% it goes and plays a particular label inside this MC's time line.
I need this funtion to be reusable, so that several MC's can call it on the timeline.
I tried with the following similar code:
limitX=this._xscale;
limitY=this._yscale;
//define my variables
[Code].....
Don't worry about the synthax of gotoandplay is just to illustrate, basically this does nothing and I have been told that is is because I redefine limitX everytime I call the function, but how do you get around this?
View 4 Replies
May 7, 2009
Load external swfs and play all step by step but loop
i want that when last movie is finish then stop.
View 1 Replies
Jun 4, 2009
I cann't find in all documentation just a simple thing how to publish a video on the web.What I did so far more or less successfull:
1. encoded a video to a flv file
2. I used video import from my local drive folder
3. selected a ready playback OverAll skin
4. was able to run test and preview successfully
Now begun some problems, sometimes I could see the movie on the web, sometimes included the skin, sometimes without the skin.
5. I saved fla to the folder as test.fla
6. I changed contentPath to my web [URL]
7. I pressed publishe video
8. I found test.swf and test.html in my folder
9. In test.html I removed everything but just leave <object>.......</object>
10. I transfered the three files swf flv html to the web folder
I tried different ways.Never I could see playback Skin, I could see it only after I moved the OverAll.swf also to the web folder. But why I need this?
View 4 Replies
Dec 1, 2009
I what to do a website in flash with CMS but I don't know where to start. Is there an open source CMS that I can use or a tutorial that could guide me step by step building a CMS?
View 1 Replies
Jun 21, 2010
exe now for debugging. The problem is I don't know how to do "step into" with that. There're two command for stepping, "step" and "next", but it all behaves similar to "step over" in a GUI debugger.So is there any good way? Maybe I need to set a break point in the beginning of the function i'm going to step into, continue the execution and finally remove the break point?
View 1 Replies
Nov 25, 2010
I have two movieclips nested inside of a movieclip.I placed code on one of the internal movieclips to have its x position increase upon each frame tick, and when it surpasses or equals the x of the other internal movieclip, I need it to turn around and go the opposite way.If it were as simple as this, I could have just done:
Code:
if (_root.OuterClip.InnerClip1._x >= _root.OuterClip.InnerClip2._x){
_root.OuterClip.InnerClip1._x += Speed;
}else{
[code]...
But neither work.
View 1 Replies
Jul 31, 2011
I'm trying to build a scrollbar object that needs to be able to dispatch the location of its dragbar on certain locations only. Additionally, and most importantly,I want the dragbar to "snap" to certain points along its path while dragged, dispatching an event only when the snap point is reached.
I'm sure I can easily figure out the event-dispatching part with the help of a Signals object, so this is not a problem. What I don't know is,how can I make the dragbar snap to, say 10 points along the trackbar path? review the attached SWF (it includes a Slider Component but I would rather prefer not to use it and build my own instead) in order to get a better idea of what I need.
View 2 Replies
Jun 4, 2003
Basically say I have 4 areas in my website. There are 4 buttons that correspond to the four areas.
On the main screen are outlines of boxes. Each section will have a different sized rectangle so I want the boxes to transform to the new sized box.
So say you click on number 2 and you are on section 1. The main box will change size to the shape in number 2 from number 1. Then say you click on button 4. The box will then change to the shape of the box for section 4 from the size of the previous box.
How do you get it to remember where you are in order to transform to the area where you click the button?
View 3 Replies
Dec 2, 2010
Sorry if this has been discussed somewhere else on stackoverflow (I could not find it), or if it is not a "programming" question (more like a discussion). Is it good to avoid using an IDE (Flash Builder, Visual Studio...) while first learning a new framework or language?
[Code]...
View 5 Replies
Jul 26, 2006
I've been Actionscripting for quite a while now, and a lot of the sources I see and books I read talk about something called XML. I understand that its a formatting language used to communicated with servers, and the syntax looks like html.
I have a few books on AS, but I don't really get the XML stuff. Is the idea that I use an XML segment of code in my Flash to import in a document to flash at runtime? Or is it that I can load variables from an external document? I don't have my own server but I do have the ability to upload files to servers, so I could probably make a file that can communicate with an SWF, and I'm told XML is the way...
So does anyone know a good way to learn about XML, and what is actually is and can do?
View 4 Replies
Aug 9, 2011
What is the shortcut for going ONE step back, when being inside a MovieClip. I get inside the MovieClip using "Edit in place" (CMD+Alt+E), but HOW DO I GET OUT using a shortcut?(In the old days i could just use the 'edit in place' shortcut again without having anything selected, but since CS4 or 5 upgrade, that option is gone.)
View 4 Replies
Mar 20, 2011
I'm using CS4 and want to test the step() for fastforword control, but I was unable to call the step() function.
View 6 Replies
Mar 28, 2012
I have seen InBufferSeek property of NetStream , useful for seeking or steping video from buffer.. Which I use with Step() method to forward and rewind functions for my Custom Player. When user select to make fastForward I set, below variables
netStream.inBufferSeek = true; // to make step from buffer and not from server
netStream.pause(); // pause video as suggested by adobe for using step()
netStream.maxPauseBufferTime = 3600; // allow stream to buffer more data in pause Mode
After that I call a Function in Regular interval which steps vide
netStream.step(75);
This works fine.. but my vidoes PlayHeadtime not get updated with this.
View 1 Replies
Sep 24, 2009
I am working with google map api ... http:[url]..What i want to do is to take up all the steps of direction, and place them in a datagrid.but the problem that the google map api provide description on in HTML format. and then i put this steps data in my flex datagrid, it shows up all the html tags in it too, including with the data.Can there be some way i can do this, without the html tags.My code for the google maps look like this :
private function processTurnByTurn():void {
var stepText:String;
var stepMarker:Marker;[code]....
This is the function to create the step ArrayCollection for the datagrid and the datagrid code looks like this:
<mx:DataGrid width="100%" height="100%"
dataProvider="{StepArray}">
<mx:columns>[code].....
View 3 Replies
Nov 19, 2011
I have a main fla file that loads a game (with a Loader) and adds it to the stage (addChild(myLoader)).Is there a way to step through/debug the loaded swf? If so, how? My game.swf breakpoints aren't hitting.
View 2 Replies
Apr 21, 2011
When step1 finish, step1 call a content event. This event unload step1 and load step2. The play is not a problem and it works good.In the content I have a rewind button but it works bad. It go back 8 frames at time, but when I stay in the first frame of step2 I must to call step1 and go to last frame position (.totalFrames).I try with global variable MovieClip(root).var but not good. I try also with not unload step1 but not solve
View 1 Replies
Jul 15, 2009
I have made a script, and now has come the point when I need to use removechild. Whenever I try this I get an error. After looking at the problem, I think I need to learn more about scope and packages. I think if I put everything in the correct scope, I will be able to use the removechild command. I tried to make all my vars public, so that removechild would work, however I got an error that anything public needs to be in a package. I tried to add the package part to my script, but got the error that packages cant be nested. I tried some other things and still no luck, just more errors.
So, if anyone could point me to a tutorial, or recommend a book or something, that will help teach me about scope and packages, Or if you are feeling patient and generous, and you think you could explain this problem to a 5 year old, please explain it to me the way you would to said 5 year old. If you maybe think you can help me out on the script, it can be found here: [URL]
View 14 Replies
Jul 26, 2009
I'm trying to learn how to use flash, and there's only so much I can learn on my own. I looked up some books on various websites, but I don't know which would be the "best" to use for someone completely new to the program.
View 2 Replies
Sep 2, 2009
I've gotten far on my own just using online tutorials and dinking around in Flash on my own but my boss(es) are starting to ask for more complex stuff that I simply can't learn by just piecing together my Flash education.I know there's many, many books out there that will teach you Flash but can anyone recommend any particular one(s) that are more concentrated in creating Web elements as opposed to game or animation development?
View 2 Replies
Apr 13, 2011
I have created a Flash file with 4 "Fill in the Blank" questions (from the Learning Interactions continued within Flash CS3) at the end. I'm then using the swf file in two different ways. One way simply loads the swf file onto a 'stand-alone' page on my website and it works perfectly.The other way I want to use it is integrated into a more complicated website where I have a Flash File into which various swf files are loaded when needed. In this version the "Control Button" doesn't change to "Check Answer" and "Reset" as it should and the whole question doesn't work. The working version is at url..Select "4 For You to Try" to go directly to Quiz Questions.The non-working version is at url...Go to "Extras" in Menu and select Naming Alkane Isomers, then "4 For You to Try" again.
View 7 Replies
Apr 12, 2010
What would be a good resource for an experienced programmer to learn Flash?Consider a very seasoned programmer that doesn't require any teaching of programming concepts and that already programmed Javascript. Someone who never created a Flash file, or even know what Flex is. Someone who could probably learn ActionScript in a day but still needs to learn how to apply it.
View 2 Replies
Mar 4, 2011
Can i learn Flex without learning ActionScript 3?
View 4 Replies
