I'm using the pageflip fla file found out pageflipDOThu and it is working ok except that I am using larger page sizes (595 by 842) and when the corner of the page curls before you turn it, the opposite diagonal side also curls.i haven't altered any of the script, just added new pages.The files are both 10mb in size so can't attach.
View 0 Replies
I am not the best coder out there so I'm not really sure where to start. I am hoping this is already done and avaliable somewhere from the get go. When I am trying to do is I have around 200 books that I have to take from a .pdf file to flash document and eventually I guess a .swf file. As of now, I have taken the .pdf files into InDesign with a placing script and exported it to a flash document. From there I added a Previous and Next button that basically just stops the play and allows me to cycle through the frames. The only thing that I need now is I want some sort of page curling transition much like the one in InDesign one. I tried adding the transitions before I exported to flash, but it does not keep it. The reason I want to keep it in flash and not use one of the ones where u just upload your .pdf into and it converts it for you is because we might want to add more features later. Therefore I have to write some sort of system for page curling.
View 4 RepliesI have purchased a dynamic pageflip script from [URL].Has anyone used it before? I have setup all the pages and all is well, however, I am having trouble changing the very first left hand page.[URL]I have looked in both the .fla files and pagedate35.xml for an instance but had no look.
View 2 RepliesI'm using pageFlip to load several jpg's and to show them in a pageFlip catalogue.Now I would like to on page 3 of my catalogue to add a button at a specific coordinate.Do you know if pageFlip creates several MC's holding the jpgs it loads dynamically or does it load them for each page-pair???I couldn't seem to find the name of the MC's, - if I could, I guess I could dynamically add a button to the MC containing the jpg displayed at page 3?
View 2 Repliesim working on a site that uses page flip but i wanted to make multiple flips as well. imagine 2 strips that are independant of eachother that both flip. i was going to make 2 flash files and load them into a container flash file.
View 1 RepliesI'm trying to get it to start and end on a spread rather than with a front cover and back cover (with blank space on the left and right). I just need to flip between two spreads.I have gotten it to start on page2, but it appears on the right rather than on the left as a spread. I tried getting rid of ename="blankpage"; on line 123 and 127, but it only caused order issues.
View 0 RepliesI am trying to use a button to flip the page rather that using the corners. I have switched the page flipping off using:
ActionScript Code:
canflip = false;
There is this code below that is used to tell me how to use a button however I do not understand it.
[Code].....
I'm (still) working on a pageflip catalogue and i need to add a system that marks selected pages and enables you to come back to the marked pages at anytime you want.In other wordz, i'm trying to obtain the same thing as this :
[URL] and mess around witk the post-it block in the middle of the pages, on top part of the catalogue.)Since the pages are loaded externally thru a xml file, I don't know how to refer to the page that is to be marked, how can i add multiple markers...
I just found the "famous" pageflip and encouterd a problem. I need to load each page seperatley.. cause loading the pageflip takes a while (its 1 mb) example:[URL] I tried putting this on every pageMC: _root.mymovieclip.loadMovie("page1.swf") followed by a preloader script, but that didnt work the pageflip can be downloaded here: [URL]
View 3 RepliesI'm running in to a problem where I've added additional pages (20+ pages in total) and everything after page 16 is transparent.
//pageflip version 2.02 (200405031400)
//
//(for the latest version, always check at http:url....)
//
//this code is written by Macc 2004.05.03[code].....
I have 3 issues i've not been able to figure out how to do:
1) I've not been able to dynamically resize the pages to fit the stage dimensions as it changes, the content MC gets placed into the stage with this code line
addChild(pageFlip = new PageFlip(ContentMc, stage.stageWidth / 2, stage.stageHeight));
i have also set the stage to
stage.scaleMode = StageScaleMode.NO_SCALE;
stage.align = StageAlign.TOP_LEFT;
but i cannot figure out a way to dynamically target "ContentMc" from the document class, it either disappears or looks squashed.
2) second issue is that the "hit area" for the mouse is too wide, meaning that if you click almost half way up the page it activates which restricts the amount of usable content area for links and such, how can i reduce it to the lower corners?
3) how can i add other MCs to specific pages from the document class?
I am using the Free pageflip v2.2.5 by Macc/IpariGrafika
[Code]...
I am making something flash flip like: [URL] but i want to do it in my banner 1000 width and 299 height problem is that i have few banner images i think 5 to 8 and i want to start my flip from "bottom-left" corner till "top-right"
View 1 RepliesWhen i load the book into my flash website, it works.. when i load it second time it doesent.. (i cannot "grab" the pages anymore) I know this is a long shot, but the pageflipper is pretty popular..so i thought maybe some of you know whats up.
I tried to rewrite all references to _level0/parent etc ect.. that does not sem to be the problem.
Its easy to recreate "bug", simply replay timeline from frame 1
Code:
btn.onRelease = function(){ gotoAndPlay(1) }
source: http://pageflip.hu/pageflip_v225_source.php
I'll send you a nice postcard from denmark if you can help me with this one!
I need to Automate the Page flip where the user has no control. Make it into an animation per say. I know it can be done. But I can't seem to figure out how. I can make just the first page. But I can't make it keep going. You guys know what I'm talking about right?[URL] Here's the code and notes...
[Code]...
I want to have a different image load on my home page everytime the page refreshes or someone visits it. Is it possible to do it without using Flash?
View 2 RepliesI'm working on an ezine, using the pageflip v2.11 from [url].... I can't get it to flip the covers unless they aren't hardcovers. It's killing me. All they do is show the shadow mask flipping, and not the page. I also have trouble with playing an mc, while it is located on the page. It reloads back to the beginning when you mouse over the corner of the page.
View 2 RepliesI'm trying to figure out the best way to make the text in the upper right hand corner of my photos page linkable URL...Here's the action script that's in the action layer of the file for that spirt: function loadGallery(directory, images)[code]
View 1 RepliesI need to create a full page flash file that overlays a webpage. Something like the example in this link.
I have figured out how to create the flash file which will overlay the page, with all elements centered, from here: kirupa forums tutorial.
The only thing I cannot figure out is how to attach the Close button which would come at the top right. AS3 is not allowing me to attach any behaviour to the button, neither does it allow me to put actionscript there. I am in dire straits.
Imagine a strip of film, where each square of the film is an object in flash, and one of those squares are displayed at any one time. Remember Viewfinders? yeah, that.
Let's say the bolded square is the object you are currently viewing. If I click a button that travels to a square on the left, I want the program to remember that my original frame now lies on the RIGHT side of the stage even though it isn't seen. So when the user clicks back to that original object, it will fly in from the right. And vice versa.
I'm very new to ActionScript. I've taken C++ and know HTML. I would imagine you do something like create an array and make every object assigned to a number in that array. And then you assign starter values for each object. i.e., everything on the left gets the variable "left" and everything on the right of the stages gets "right" for some variable named "Position" or whatever. And when the position changes, so too will that variable change.
I have 7 icons on the left side (vertically) with two stationary phones on the right side of the movie clip and all of the icons has its own different URLs like differentiator.aspx?point=1 (2, 3, 4, 5, 6, and 7). If I click one of them, the animated phone appears on the right side, but the problem is how do I display the content of page from each icons on the left side? Its like two onClick events at the same time; one to play the "scene" and one to change the content of the page.
View 9 RepliesI have made an application in flash AS3 and I have implemented PayPal gateway, I want to update my credits text field automatically when PayPal executes my notify_url.php page. I want that my application get any notification when PayPal executes notify_url.php.Is there any method of getting response from PayPal?
View 1 RepliesI want to download files from the server side to client side without prompting a window to the user to download when any updates happen at server side.Right now I am using urlstream class but first file is downloading completely rest of the files contents downloading partially.
editCode sample taken from other post. Warning: it's a huuuge chunk o'code.
<?xml version="1.0" encoding="utf-8"?>
<mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml"
xmlns:MyComp="client.components.*" layout="absolute" height="554" width="817"
[code]....
Im in need of a simple code which makes a MovieClip move side to side horizontally preferably using the attachMovie function.The MovieClip must not go off the screen so the movement will have to be limited within the stage size.
View 11 RepliesURL..On this site it has this Image Carousel controlled by moving my mouse side to side, is there a flash component, or some flash script i could use/buy?
View 2 RepliesI want to create an application that has these features
- At client side: Display a list of images, when user click on one image, data will be stored in MySQL database.
- At server side: Manage images used in client side, I can delete, add new images.
Is this possible for me to achieve this using Flex? And if it is able, will my output be 2 separate SWF files? And where can I find the materials to read on writing such applications?
i have to sanp images into tile or grid form. but my images are in 4 different sizes in height/width. i have to place all images in side by side like tiling.
View 1 RepliesHere's the AS2 way:
1. Timeline has only 2 frames
1. Make movie clip and give it an instance name (in this case: box_mc). Make sure this takes up frame 1 and 2 on timeline.
2. On a sparate actions layer on frame 1 put this down:
mouse_x = _xmouse;
setProperty (_root.box_mc, _x, mouse_x+((getProperty(_root.box_mc,_x)-mouse_x)/2));
3. On frame 2 of actions layer put:
gotoAndPlay (1);
how to do this in AS3? I really want to be able to have 3d rotation tweening in my flash file and AS2 won't let me do it.
I am on a tight deadline and looking for the AS3 code of how to do what this company does on their site:URL...However, I don't know AS3.Literally my project requires I recreate the what is shown with the hand holding the sharpie and moving only back and forth restricted to a centered rectangular area at the bottom of the screen.I know how to import the image that follows the mouse to the stage, and to make it a movieclip. Let's say I have named the instance "Image_mc".Does anyone have the actionscript for how to do this? Do you attach it to the object or to a keyframe on a separate actions layer?
View 5 RepliesHow would I be able to create a scene where you scroll left to right using the mouse, but instead of having it at a constant rate and having the picture (background) move when your mouse is at a certain x coordinate to have it be that when you move the mouse away from an object the background will move, and will move faster the farther away the mouse is? I have tried scrolling back and forth with x coordinates, but I haven't been able to get this to work.
(I found an example of what I'm trying to describe here; [URL], just click play, skip, leave, and then leave again and you'll be able to see it).
