I'm (still) working on a pageflip catalogue and i need to add a system that marks selected pages and enables you to come back to the marked pages at anytime you want.In other wordz, i'm trying to obtain the same thing as this :
[URL] and mess around witk the post-it block in the middle of the pages, on top part of the catalogue.)Since the pages are loaded externally thru a xml file, I don't know how to refer to the page that is to be marked, how can i add multiple markers...
I have purchased a dynamic pageflip script from [URL].Has anyone used it before? I have setup all the pages and all is well, however, I am having trouble changing the very first left hand page.[URL]I have looked in both the .fla files and pagedate35.xml for an instance but had no look.
I'm using pageFlip to load several jpg's and to show them in a pageFlip catalogue.Now I would like to on page 3 of my catalogue to add a button at a specific coordinate.Do you know if pageFlip creates several MC's holding the jpgs it loads dynamically or does it load them for each page-pair???I couldn't seem to find the name of the MC's, - if I could, I guess I could dynamically add a button to the MC containing the jpg displayed at page 3?
im working on a site that uses page flip but i wanted to make multiple flips as well. imagine 2 strips that are independant of eachother that both flip. i was going to make 2 flash files and load them into a container flash file.
I'm trying to get it to start and end on a spread rather than with a front cover and back cover (with blank space on the left and right). I just need to flip between two spreads.I have gotten it to start on page2, but it appears on the right rather than on the left as a spread. I tried getting rid of ename="blankpage"; on line 123 and 127, but it only caused order issues.
I just found the "famous" pageflip and encouterd a problem. I need to load each page seperatley.. cause loading the pageflip takes a while (its 1 mb) example:[URL] I tried putting this on every pageMC: _root.mymovieclip.loadMovie("page1.swf") followed by a preloader script, but that didnt work the pageflip can be downloaded here: [URL]
I'm running in to a problem where I've added additional pages (20+ pages in total) and everything after page 16 is transparent.
//pageflip version 2.02 (200405031400) // //(for the latest version, always check at http:url....) // //this code is written by Macc 2004.05.03[code].....
I have 3 issues i've not been able to figure out how to do:
1) I've not been able to dynamically resize the pages to fit the stage dimensions as it changes, the content MC gets placed into the stage with this code line
addChild(pageFlip = new PageFlip(ContentMc, stage.stageWidth / 2, stage.stageHeight));
but i cannot figure out a way to dynamically target "ContentMc" from the document class, it either disappears or looks squashed.
2) second issue is that the "hit area" for the mouse is too wide, meaning that if you click almost half way up the page it activates which restricts the amount of usable content area for links and such, how can i reduce it to the lower corners?
3) how can i add other MCs to specific pages from the document class?
When i load the book into my flash website, it works.. when i load it second time it doesent.. (i cannot "grab" the pages anymore) I know this is a long shot, but the pageflipper is pretty popular..so i thought maybe some of you know whats up.
I tried to rewrite all references to _level0/parent etc ect.. that does not sem to be the problem.
Its easy to recreate "bug", simply replay timeline from frame 1
I need to Automate the Page flip where the user has no control. Make it into an animation per say. I know it can be done. But I can't seem to figure out how. I can make just the first page. But I can't make it keep going. You guys know what I'm talking about right?[URL] Here's the code and notes...
I'm using the pageflip fla file found out pageflipDOThu and it is working ok except that I am using larger page sizes (595 by 842) and when the corner of the page curls before you turn it, the opposite diagonal side also curls.i haven't altered any of the script, just added new pages.The files are both 10mb in size so can't attach.
is it possible to incorporate a checkbox system into a contents page, so that depending on whether or not the boxes are checked, movieclips will be shown?
with each section having a few mc's each the navigation works by just loading a new mc for each page.. eg: each time you press next it loads the next MC
however i want to add the checkbox to the contents so if section 3 is unticked, the mc's in it will cease to exist or be inaccessible or something, and will be skipped when navigating through the rest of the sections
I have a FMS 3.5 installed on windows 2003 server, with a NFS file system.Both the application directory and the data directory is on the network file system.Every two weeks the system became unstable because the Free system PTEs go under 2000.The only strange thing i've noticed is that the Virtual size of the FMScore grows to about 1.300.000K after few hours from the reboot of the machine and stay to this value indipendently from the load of the server, In another FMS installed on a machine without the network file system this value is 16.800 K.
I am creating a site, and I have this navigation system inside the portfolio page. But it is not working. So it is like this it is built. Default.fla is loading portfolio.fla inside a movie clip loader. and the portfolio.fla has a navigation system for different portfolio pieces. I have set up the first one to work (dasa design). so, I need the outro to play of hm1.fla (first file loaded) and then play the intro of the Dasadesign file. I know this has something to do with the depth and so, but I have tried many ways but not succeeded. files are found here! [URL]
I am trying to implement a comment form for a flash page using a php email system. I am new to flash, but I got it working for the most part. The problem is that I receive emails, but they are blank and do not contain the info I put in. Below is the Actionscript I used and the php I used.
on (release) { if (!FirstName.length) { EmailStatus = "Please Enter your name."; }
I have struggled through making an application that displays sequentially, through the use of next and previous buttons, information derived from an XML file that is presented in four different text fields. I would like to be able to "select or mark" some of the nodes as having been examined through double-clicking or dragging and dropping them in a certain target area.
When I double click on the name field, I am looking for two things to happen:
1. The text color in all four displayed fields to change and keep the new color.
2. Have the information displayed transferred to another XML and a text file to be used elsewhere.
I have struggled through making an application in flash 8 / AS 2 that displays information derived from an XML file sequentially, through the use of next and previous buttons, and is presented in four different text fields. I would like to be able to "select or mark" some of the nodes as having been examined or checked either through clicking or dragging and dropping them in a certain target area. When I double click on the name field, I am looking for two things to happen:1. The text color in all four displayed fields to change and keep the new color.2. Have the information displayed transferred to another XML file and a text file to be used elsewhere.
I've got a map that you can zoom in and out of. What I'd like is that are you zoom into the map the labels marking items on the map remain the same size. Initially I did this successfully by making the labels independent movieclips(ie not children of the map mc) and then using localToGlobal to make sure they were in the right position. However I found that there was a bit of lag in their movement compared to the movement of the map.
So I thought what I'd try is to make the labels children of the map and then scale them up and down inversely to the scale of the map. However I haven't been entirely successful. I'm having difficulty finding the equation to make it scale up and down correctly in proportion to the map. The problem is that my labels are scaling in a linear fashion while my maps scaling isn't.
I got a textfile who i am reading on a serverside script and passing it as a script to my client side as3 code. The problem is that i am using characters like ä,ö,ü,ß and this isn't well displayed. I tried System.useCodePage but the compiler complains about : 1120: Access of undefined property 'System'. It doesnt matter if I tried this on the first line of the 'Action' in the first scene or in the first line of the first .as file i am loading. (btw i am only working with .as file and not in the timeline). When i am importing flash.System.* the compiler complains he dont know useCodePage.
The thing is that if i made my project with less then 10pages it works fine... if i put more then 10pages it dosent show more then 10 pages.....
I dont dont how can u help me on this.... that way im going to put my project here, so it can happear one gentil mind and see the project, and maybe say to me what is wrong...
I have got the Flashpageflip (a flash based application from [URL]) and MagicZoomPlus (a javascript from [URL]) and I would like to integrate the two.
Flashpageflip does accept swf pages as content and I'd like to zoom into images that are inside these swf files. This means that I have to call the javascript from MagicZoomPlus from within the swf file. Can this be done at all? And if so, how do I achieve this?
Extra info: The flipping page swf is called from within a PHP-file. I have been able to declare the MagicZoom javasrcipt functions in thie PHP file, but what needs to be done next is that the swf generates the following code:
The free version over at [URL] displays sound in their online demo, but when I download the Fla. and preview it out of CS4 everything works but there are no sounds playing when I flip. SoundOn - true has been set, and I cant work out why it isn't working. No settings have been changed apart from soundon. I have tried with their older version 2.14 and that works fine.
I am running into an issue using the free version of PageFlip I'm trying to resize the flash file, but when I do, the mouse rollover in the corners appears on the opposite corner of the current page. I was able to get everything to work OK at one size, but after I resized the stage and all the other elements the problem showed up. I have examples posted at the links below. The first the page is sized to 600 pixels (which worked); the second is sized to 720 pixels (with problems).[URL]..
I'm looking for an extension/softwre to display PDF magazine with pageflip effect. It is not a problem to create flipping magazine with images. What about PDF?
