ActionScript 2.0 :: Play Three Flv In Endless Loop?
Nov 4, 2009
I have three flv videos (video1.flv, video2.flv and video3.flv) and I want to play them one after the other (no controls, no skins). When video3.flv is finished I need the movie to restart playing video1.flv again and the rest after it, an endless loop.
How can I do that??
I've tried including the videos one after the other in the time line and in the last frame a gotoAndPlay(1); This works, but the final .swf weights almost 10mb. The project is web based so this is way too heavy.
Now I'm trying the flvPlayback component, but I'm getting quite lost here. I'm importing the three flv to the library. The video implementing wizard shows for each flv but finally I have only one FLVPlayback element in the library. Then I drag an instance on the stage but I don't know how to continue .. Am I doing it correctly? If so how can I continue? Will this method give me a lighter final .swf?
View 1 Replies
Similar Posts:
Jun 4, 2010
I have a flash file that is looping endlessly. I only need it to play once and stop. I have tried eveything to fix it but simply cant ge tit to work, The file can be seen here:[URL] My html code via golive is set yo play once, i am pretty sure the issue is a setting in FLash
View 1 Replies
May 14, 2010
I have made a game, and now I'm putting in a highscore-function. Like the one below, who reads the highscore-list. Everything is working fine when testing from flash, but when I start the swf-file from the folder (or test it on the iPhone), it just loops throught every frame, why is this? If I cut out the code below, it works fine on both stand-alone sfw-file and on the iPhone. I've tried to only use the first line below, to test, and it loops.
ActionScript Code:
var file2:File = File.documentsDirectory.resolvePath("highscore.txt");
// Create a file stream to write stuff to the file.
var stream2:FileStream = new FileStream();
[Code].....
View 1 Replies
Apr 14, 2006
This script goes with "prev scroll button"
trace(_level0.imagestrip_mc.images._x+"before images");
trace(_level0.imagestrip_mc._x+"before imagestrip");
var tab = new mx.transitions.Tween(_level0.imagestrip_mc, "_x", Strong.easeIn,
[code]....
View 1 Replies
Mar 2, 2009
I've always struggled with this for some reason, but say I have 5 images loading from XML. How would I make it so they would cross fade each other on an endless loop? I can make it so it gets to the end by loading them on top of each other and then fading each one out, but once I get to the end I'm lost.
View 1 Replies
Jul 23, 2011
I want to create an endless loop of images through a timer.On the fla I have an MovieClip �ImageClip� Yousing a timer I will repeat the call to imageArea.addChild() with the next image.My question is am I going to run out of memory as addChild() implies this.I want to replace the image not add more images to a collection.
View 5 Replies
Apr 25, 2009
How do I make a smoothe and endless horizontal loop of five or six photos that seems seamless ? I think that this is an actionscript thing that I do not know. I just want five or so evenly spaced photos to scroll from right to left at the top of the stage.
View 1 Replies
Sep 1, 2011
Im building a game where i would like the blood stains (when shooting people) to never disapear. Now i just spawn a movieclip/sprite on the map whenever a body is been hit, and just leave the stain there. The problem is that this gets very choppy after a while and the fps is plummeting...
I also spawn gun shells after every shoots been fired, and thats flawless, it never lags one bit. I guess this is due to the tiny size (compared to the blood stains)?
I would have given up if i would not have found this game, where it works without any lag - at all. In this game the blood stains are never removed and all bodies are still on the ground, no lag. [URL]..
View 1 Replies
Mar 14, 2012
I am programming a side-scrolling game. I want to be able to control the speed of the endless side-scrolling background relative to the speed and position the player is moving at.
I want to know how to do a few things:
Like, if the player is running, the background scrolls faster. If the Player is walking, the background scrolls slower. If the player isn't Moving, the background shouldn't be moving. If the it is at the start
Or end of the level, the background should stop moving too.
View 2 Replies
Jul 26, 2002
i have a problem about making an endless tunnel. how can i make a movie that can continuosly loop without adding a bunch of frame and object.and how to make that looping movie doesn't break at the end.
View 2 Replies
Jun 15, 2009
I made three flash presentation for my company some time back in Flash 8, during an exhibition my company want all the three presentation to play in a loop so i opened the fla file of each presentation and inserted the following code in the last key frame of each presentation:
in careerfair.swf I inserted
fscommand("quit");
loadMovieNum("college.swf", 0);
[Code]....
I don't know, it is still not giving me the result, on double clicking on the presentation i just see one presentation that quits at the end and the new one doesn't start.
View 1 Replies
Jul 11, 2009
I have tried about as many tutorials as I can find online to create a contact form within my flash that emails me when someone fills out the forms, including a very good step by step at VTC. What I have found is that most of these tutorials start with the assumption that you're creating the contact form on a blank flash canvas, which is reality, is not always the case. So while I am sometimes able to get the forms to work if I do it on a brand new Flash movie, the moment I try to recreate the form within my current flash file, it stops working. I have mostly tried to recreate the contact form as a seperate movie within my flash file on it's own layer and have tried placing the Submit button within the contact form movie and also outside of it - neither works of course
[Code]...
View 3 Replies
Nov 24, 2009
I have this animation: [URL] I need it to be like a circular tape playing. It has to play Nº1 image after getting to Nº8 or to Nº8 going backwards from Nº1.
View 1 Replies
Nov 23, 2011
Imagine you have 10 movie clips, only 1 is visible on stage at any time. Using the arrow keys for example, you can move through the movie clips, click left and the one on screens moves left and the next one in line moves in from the right. When you reach number 10, and you click left, number 10 will move off left and number 1 will come back on right. And vice versa.
This is what I have to try to get worked out. Currently I have a variable which keeps track of which panel is displaying, and as I click on one of two movie clips I check with a conditional to see if that variable is >10 or <1 and then either + or - 1 appropriately, or set it to either 1 or 10, so that number loops.
So that logic part works. What I now need to do is cleanly work out the tweening of the movie clips. I'm using TweenMax. I am currently using another conditional that gets told if the user pressed left or right, then it uses a switch to check the current panel number, and then after all of that it tweens the correct stuff. But that's a huge load of code and I reckon there must be a cleaner way.
Here is my messy code:
Code:
package
{
import flash.display.MovieClip;
import flash.events.MouseEvent;
import flash.events.Event;
[Code].....
View 0 Replies
Mar 17, 2010
Just discovered this forum recently and it looks like an endless source of information! am only a newby to Flash CS4 and AS3I need to create a CGI Form in AS3, but I really don't know where to start. If you know any good tutorials, websites, books etc
View 2 Replies
May 8, 2009
I have a movie in which three balls bounce up and down 3 times and then bounce high and trade places, then they bounce 3 times and repeat.Instead of bouncing three times I would like to shorten it with a loop.How do I tell the movie to loop from frame 156 back to frame 106 three times, and then go to frame 157 and play?
View 10 Replies
May 26, 2010
I have the following code on frame 1, which loads 3x swf files into flash and then it plays them over and over.
I want the "ani2" + "ani3" files to standby while ani1 is playing. After "ani1" is finished, "ani2" starts playing and "ani1" loops back to the start but it should not play again. Same thing for "ani2" and "ani3", but after ani3 has played, then "ani1" starts again while "ani2" + "ani3" is on standby again and so on....
The code:
ActionScript Code:
var url:String = "ani1.swf";
var req:URLRequest = new URLRequest(url);
var myLoader:Loader = new Loader();
[Code].....
View 1 Replies
May 26, 2009
Code:
animator = createEmptyMovieClip('animator',1);
bg_1 = animator.attachMovie('bg_mc','bg_1',1);
bg_2 = animator.attachMovie('bg_mc','bg_2',2);
[Code]....
how to get it to go from left to right, rather than right to left as it does now. Been messing with it for a while and have no idea what to do.
View 2 Replies
Feb 11, 2010
I'm trying to create a endlessly scrolling bitmap background. I want to make it as efficient as possible as there is plenty of other game logic going on too. The idea is to have a repeatable bitmap scroll horizontally on an endless loop, which can obviously be achieved by placing two sprites of the same bitmap next to each other and offsetting one when it reaches the far left boundary. I was wondering if there is perhaps a faster more efficient way to do this, perhaps using scrollRect or copyPixels? If anyone has any idea which method would be fastest,
View 1 Replies
May 27, 2011
I'm trying to cycle between 2 different tween actions in Flex. Here is what I'm trying so far: In declarations:
[Code]....
The problem is that once I start the animation (by clicking a button), I get a timeout error saying the script has been running for longer than 15 seconds, with no tweening ever occurring. The animation works if I were simply animating it once.
View 2 Replies
Apr 8, 2010
I've created a menu that appears as a series of cubes. The action script for these boxes will work on a stand alone file... The main menu uses a series of buttons that work like variables and also works fine in a test file... when the movie for the "architecture" button is loaded it loads the content_mc and then sub menu goes nuts. The buttons continue to cycle their movie clips regardless of the mouse position.
View 2 Replies
Jun 4, 2008
so im trying to get a loop to play the first frame until i is greater than 2.
so on the first frame Im increasing the value by 1
i++;
then on the last frame Im putting a if then statement that if i is less than 2 replay, else goto and stop at the next frame
var i = 1
if (i < 2 ){
gotoAndPlay(1);
}else{
gotoAndStop(361);
}
now I kinda know whats happening when the second code excecutes its resetting
var to 1, so my question is, how do I say once this movie has played once, stop the second time?
View 1 Replies
Nov 29, 2009
I am working on a project which I have to link a few swf. I have used loadMovieNum for the linking, meaning the actionscript I apply for my buttons look like this:
on (release){
loadMovieNum("filename.swf",0);
}
Above script enables me to link the files. However, I wish to play an audio across all files CONTINUOUSLY. Is there ANY way to do it? I tried putting the audio in another file and load the movie on level 1. But everytime when I jump from one file to another, the audio stops.
View 2 Replies
Mar 19, 2010
I want to know if there is any existing implementation of 'endless scroll' in Flex ? I searched online but I could only find implementation in Javascript.What could be the pros/cons of having an 'endless scroll' component in Flex, which would be more efficient JS or Flex.
View 1 Replies
Oct 13, 2008
I've created a looping movie in flash which is made up of several seperate swf files and linked together in the main file- it plays fine for the first couple of plays but gradually the timing becomes delayed and slides start to play over one another, is there a way I can have the full sequence play fully everytime?
View 1 Replies
Aug 14, 2010
I am using a mini MP3 player to play an MP3 file. It is working fine, but I need to play the MP3 file in a loop. I have added a variable loop and set it to true but it still doesn't loop.
<script type="text/javascript">
var so = new SWFObject("player.swf", "mp3player", "0", "0", "8", "#ffffff");
so.addVariable("file", "1-05_Concert_ alla_rustica.mp3");
so.addVariable("loop","true");
so.write("flashcontent");
</script>
How can I get this to work?
View 2 Replies
Oct 5, 2011
I've surfed through the Internet and can hardly find any tutorial on how to make a slideshow auto play.S3 tell me the syntax of loop play of a slideshow?
View 3 Replies
Apr 2, 2009
I am having go with one one of the tutorials here. I am trying to use XML to loop, or play, the list of songs that I have going on. Though, I get stuck with two problems:
1) The Flash will not play the 2nd or third song of the XML file, only the first than it stops.
2) The Flash will also not play the XML file if I embed it on another folder, like for example: I want the flash to be embeded on my home page (so index.php) though I have all my files (songs.xml, the songs, home.as, flash_home.swf) on a folder named /flash/ off my root folder.
View 14 Replies
Jul 10, 2006
In my project i need a code wich allow me to play an animation (not a motion tween)it is a self hand made animation frames by frames.my animation start from frame 10 and finish in frame 15.I just need to play it from 10 to 15 in Loop when my mouse is over.and stop animation loop when my mouse is out.
View 3 Replies
Jun 23, 2008
I'm almost done building a full flash site where it navigates by position of timeline.I just need a simple on/off button for a soundloop to loop and play automatically. the on/off button just simply turns it off (toggle is optional). on it doesn't have to resume, just start the pool again.
View 14 Replies
