Ok lets say I have 3 buttons and an arrow directly on top-middle of the 1st button. How do I make it so that when I rollover anyone of those buttons, it goes to the middle of it? Only its x position is changing...
View 1 RepliesI have a big image (1600x1200) Which obviously doesn't fit in the window. How can i have it so when i hover the mouse the image moves. Basically a Yugop scrolling effect but in all directions
View 3 RepliesI am having trouble with a job I am doing at the moment which has an mc with buttons within it. I want it so that when I roll over the mc it tweens from a small version to a larger version, and on this mc there are some buttons. At the moment I can get the mc to move but the buttons remain inactive and also the rollover states on the buttons don't work. I have attached a simpler version of what I am trying to do to this post.
View 3 RepliesI'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 RepliesI'm creating a menu system, the text buttons should, on rollover, move all buttons to the left (of the button currently rolled over) 100 pixels, in the gap created a sub menu running vertically will appear which will break into a 2nd horizontal submenu etc. I'm still in the early stages, and have hit a stumbling block, I placed a trace (this); cmd in root of the roll over function then again in each segement of the IF/ELSE loop inside that fuction. The trace CMD in the root of the rollover gives me the feed back _level0.btn1 or 2 or what ever button I have rolled over but the ones inside the IF/ELSE loop all say _level0.btn0 regardless of the button I roll over!
[Code]...
all the tutorials for movement in actionscript seem to use the onclipeven(on enter) as well as only refer to movie clips. so this is what i want to do in the simplest sense.RedButton is starts at position RedA. If you click it on position RedA, it moves to position B. If you click it on Position B, it moves to Position C. If you click on position C, it goes back to B.
I basically want a 7 buttons to move around using actionscript. They each have a their own "home" spot as well as 2 "shared" spots where the active button will sit. i tried a simple function similar to:
red_btn.onPress = function (){
if (this._x = 360)//at active
{[code]....
So theres obviously a huge mistake in my logic because it doesnt work at all, not the mention i dont get any movement, just kinda...teleporting buttons, which is not what i want.
i want to make a group of buttons, this buttons have to be in constant movement, random movement, so i download an example from this site, So now i have all the buttons moving, and the quesition is this... how can i make the random movement stop, on the rollover, and make it start again in the rollout.... thats the whole stuff..
View 6 Repliesi have 2 buttons and one large image. this image has about 10 product images inside of the clip.here is the idea...i want to click on the move left or move right button, clicking on the button will move the MC containing the Product Images to the left or right.the thing i am not getting is normally when i move stuff on the X-axis i have more than one button and attach the actions to each button. but i only have two buttons now. one for left and one for right. now i am confused.
View 14 RepliesI have about 6 buttons that have an over state and hit state. I have actionscript that has them going to a url when on the hit state and on roll over it is showing a text label. All of that is working. The issue that I am having is that for 3 of the buttons, they flicker when you roll over them. These are built and coded exactly the same as the others that are working. where I should look for the breakdown? It seems strange that there is a inconsistency unless it is the order of the buttons or something like that.
View 1 RepliesI've tried to make rollover buttons, following a bunch of tutorials. I'm a noob, but I'm sure I've done everything correctly!Basically, the compiler shouts at me, while, another .fla that I downloaded and tried to follow with tutorial works perfectly.
View 2 RepliesI have a big circle with buildings all around the edge. There are two buttons that should control it. One to rotate the circle left, and one to rotate the circle right. I'd like each click of a button to rotate the circle and have it stop on a building, which then would activate an animation of the building.
View 4 RepliesI have a rollover button and I have assigned actionscript to play a sound when the button is rolled over.
However when the sound plays, it seems to overlap the sound and play it many times! I know it is not repeating the sound as I have tested it with a song and it plays the song many times overlapping, rather than repeating it.
I have the code used below:
[Code]...
I would like an animation to play (of the words being scribbled out) and when you mouseout, it goes back to normal. On page click, I wanted the link to change colour so that you would know which page you were on.I have created a frame by frame animation of the words being scribbled out, but I don't know what to do with the animation!How do I insert it into my html? Do I need to use actionscript in flash?
View 2 RepliesI am new to flash. I have had this flash header up on my companies website for live for over a year now[url]...
I want to be able to change the text for the different menu options. (ie. swap About Us with Products).
I am fairly computer literate, yet having a hell of time trying to figure it out in the flash editor. All of the button just say Home and they seem to be drawing from some root, but cannot figure out where that is or how to edit.
I have a map of the United States and have created a zoom effect for each state so that when the user rolls over the state, the state is magnified, and when the user rolls off the state, the state is returned to its original size. Everything works fine if the mouse movement is slow. However if the mouse movement is fast, it doesn't work.
View 1 RepliesI am building a website and I need to fade in/ fade out buttons. Here is an example : My main goal is that when I roll over the services button, I want the submenu (corporate and weddings) to fade in. Then when I roll over the portfolio button, I want the first submenu (corporate and weddings) to fade out and the second submenu ( clients, corporate, weddings, etc..) to fade in and to stay like this. Finally when I roll over testimonials, the second submenu fades out. And so on for the rest of the buttons. I know how to animate the buttons to fade in/out but I don't know how to make them fade out when I roll over the other buttons. I have attached my fla and swf. [URL]
View 3 RepliesThis is probably a really dumb question, but I'm very new to AS3 so please bear with me. I created some rollover buttons (movieclips) for a flash website in AS2 using the following code:
onClipEvent (enterFrame) { this.onRollOver = function() { this.gotoAndPlay(1); }}
onClipEvent (enterFrame) { this.onRollOut = function() { this.gotoAndStop(1); } }
on (release){ getURL("index.html", "_parent");}
Could anyone advise me on how to start converting this code into AS3? I know I have to use an EventListener but I don't really understand how it works.
I am trying to create some rollover buttons which will load a movie when pressed, but as soon as another button is pressed the movie playing should turn off, replacing with another movie.At the moment you press the buttons and all the movies play on top of each other
View 2 RepliesI'm trying to create a menu, where some buttons becomes visible when the user "rollOver" a box the buttons is beneath. Look at http:[url]... menu system, at the main page.I place my buttons within a MC, and gives the MC this AS:
[AS]onClipEvent (load){
change = false;
}[code]....
But when I move the mouse over the buttons, they aren't enabled, probably because flash got the idea that the MC is above the buttons, and that the MC is a button.
I am really getting stuck with the 'Local Connection' action script vibe. All the tutorials show adding text from one swf and it appearing in another, but to this day i still cannot find a way of rolling over a button and it triggering the rollover on a button in anther swf.
My theory is that if it is possible to add text to another swf...surely connecting buttons is possible..
I admit to being in WAY over my head here, but it seems like there should be an easy fix (yeah, right!) Here is my URL: [URL] I used AS3 to create my buttons, but when I click on them they open up new tabs or windows and I want then to just stay in the same tab. I got this AS for the buttons from a Flash workshop I took over the summer and I've tried a couple things I found online to change the target for the buttons, but I just got a bunch of errors. So now I'm kind of "afraid" of my AS
View 2 RepliesSo below is my code for a project I'm working on. I'm having some trouble though. I got the code for the scrolling menus online from another forum, but I can't figure out where that was. In any case, the current version of the code allows for the scrolling to happen when I open the page displays (enter Frame). But I can't figure out how to get the scrolling to happen only when I hover over the menu. I only want each one to scroll when I hover over the menu, not when I get on the page. I tried to replace the "enterFrame" part of the code, but it didn't work right. I need this done ASAP.
[Code]...
I have a movieclip in my animation, call it mc_1. When i roll over it i would like to display 2 buttons near mc_1 - arrows up and down. With these buttons i can control y coordinate of mc_1 (including these buttons). So i've tried something like this.
Inside mc_1 i've created 2 keyframes. First includes only mc_1. Second includes mc_1 and two arrows (movieclips also).
[Code]...
make the rollover effect on the buttons located here (under Zones):
[URL]
I did this:
ActionScript Code:
function moveX(mc:MovieClip, newX:Number, easeSpeed:Number) {
//trace("moveX Started");
mc.onRollOver = function(){
[code]....
To make a simple rollover with a click to go to another page, I'm thinking there has to be a easier way sticking to coding still. I don't want to place the code on the button but keep it on the timeline like above.
how the rollover animation on the top navigation buttons was made on this site --> [URL].
View 2 RepliesI've just finished making advanced rollover buttons, but I just realized that apparently, I don't know how to link them. Can someone explain to me how to link rollover buttons and exactly where to place the code?
View 2 RepliesI have a bunch of thumbnails which I want to be treated the same on rollover/rollout/press. Right now, I have it working so that the alpha changes on all of them on rollover/rollout/press, but to do that, I have a code for each individual thumbnail, and I know there has to be a way to just have one code that applies to all of them instead of repeating so much (but I'm just not sure how to do it). This is what I have right now:
[Code]...
Im trying the following menu, and Id like to make them to have rollover, and rollouteffects, staying in the "over" position when clicked.When clicking in a different button, the previous clicked button should go back to normal position, but not just jump right a standard button.How can I do that without using a prototype, because is a horizontal menu and the buttons have different width sizes
View 1 Repliesi'm not very good with actionscript but i manage to do something close to what i want. It's explained in the swf itself... swf: [URL]
View 12 RepliesI am building a fake Windows looking OS in Flash for a project of mine. So far I have a clickable start menu, and I want the categories inside the start menu to be able to be rolled over like in Windows and open up to clickable links. Just click the start menu in Windows, and then scroll into "All Programs". I want to be able to have scrolling buttons like that. I am using Adobe Flash CS3 Professional and Actionscript 3.0. I've only ever used Flash in the past to make cartoons and things of that nature.
View 3 Replies