I have a dynamic text inside a movie clip. I placed this action on the instance of the dynamic text:
onClipEvent(load) {
text = "this is a text";
}
On the movie clip I created a motion tween changing the _alpha of the dynamic text from 50% to 0%.But when movie clip is loaded, it only showed the dynamic text not doing anything.
I'm sure this has been asked in some way or another a couple of times before, and sually the first response seems to be..."are your fonts embedded?" Yes, they are. I am using a couple of different tweening classes (it happens with all of them). Basically what I'm doing is a simple sliding in and sliding out animation via the x and y properties of a movieclip. It only happens to a few movieclips, but some (not all) of my dynamic textfields disappear when doing this. When I click in the area that they are supposed to be, it magically appears. I have even tried creating the masks dynamically to stop the bug with no luck. It is very sporadic, but does anyone know/have experience with how to solve this problem?
View 9 RepliesVirtually the only dynamic ease-tweening you ever see in Actionscript is the ubiquitous "exponential ease-out." You know, the Zeno's paradox, go halfway every time, Barney's menu method:
distance = finalX - _x;
_x += distance / 2;
It's wonderfully simple and easy to code, but it lacks flexibility. You can choose your destination, but you can't specify, "I want to get there in 40 frames." Also, easing *in* with the same method is not so easy. There are many mathematical approaches to calculating an eased tween. I've derived some easing equations using three different curves: quadratic, sinusoidal, and exponential (as well as a trivial linear equation). Each of the three curves has its own particular "style" of easing; it's quite fun to compare their aesthetics.
All of the equations allow you to specify the beginning value, the change in the value, the duration of the tween, and the current time. Note that the equations will work for both frame-based and time-based animation. That is, duration and current time can be either frames or seconds/milliseconds.Here are the quadratic easing equations. I'll post the other two sets soon.
Code:
// simple linear tweening - no acceleration
// t: current time, b: beginning value, c: change in value, d: duration
Math.linearTween = function (t, b, c, d) {
[code]....
Right now, the equations are all set at "maximum easing", analogous to an easing setting of 100% in Flash's Frame panel. It is fairly simple to adapt the equations so you can specify an easing percentage. Personally, I almost always use 100% manual easing within Flash.
[URL]
First of all: this is my first post at actionscript.org *happysound*. I'm working on this flash gallery since a couple of days and something is drinving me crazy in actionscript.
The concept: in this part of the flashfile i'm loading thumbnails in dynamicly created movieclips on stage (1.jpg, 2.jpg, 3.jpg). Everything is working fine, but now I wanted to add some fancy fading when the loading of a single thumb completes. For some reason I can not get the tweening class working and I'm sure it's a problem with the referencing to the clip. I know this cause when I change "thumb"+i to thumb1 it is working. Googled for hours without result..
[Code]...
I'm building a website. The background for each of the sections of the site is a different colored linear gradient. Does anyone have any ideas on how to build a class, prototype or series of functions that will dynamically change the background gradient from one colored gradient to another over a period of time?
View 1 RepliesI've searched a lot, but still cannot find answer to my problem. I have a dynamic gallery that needs some animation on each item. I tried using AnimatorFactory, but because items are dynamically created it doesn't work. I tried using dictionaries, arrays, but nothing helps. I keep on getting the following error: Code: ReferenceError: Error #1069: Property p_380020857260 not found on packages.lord.Group and there is no default value. Here is a snippet of my code regarding this:
[Code]...
I am attemping to shape tween text. (Flash CS5.5)
What I'm doing is:
Create frame at frame 1 Insert text Insert keyframes at two different points down the time line Change the last frame to what I want it to morph INTO Break apart all keyframes, and Insert shape tween in between the first and second, and second and third keyframes.
When I go to play the movie, it flashes the text that is in the last frame ONLY.
I'm getting the following error: Motion tweening will not occur on layers with ungrouped shapes or on layers with more than one group or symbol. I don't have any ungrouped shapes (it's all text), each layer has 5 instances of only one symbol (keyframes), no objects are grouped and text is all static text.
When watching the animation, the first word (web) looks fine, on the second word (design) the tween fails on the last couple of frames of that clip (the blur filter disappears), the third word (and) is OK, and on the forth word (development) the blur filter is not applied to the last 16 frames of that clip.I broke each animation into its own MC thinking that was causing the issue, but that didn't fix anything.
i have a problem with the line space flash creates when a dynamic text is loaded in a dynamic text field on the stage i put a dynamic textFild with istance name "profile_text". then im loadin in it a text. my text is written in the Notepad like this
[Code]...
i already set a Textformat to my dynamic text with i tryied to play with the "Leading".. but i think it something dealing with paragraph. how i can decrease spacing between paragraphs??
All I want to do is add text from my string to dynamic text field when I click dynamic buttons. What should the as code be for this? Here is my code. Right now I just have the click returning another shape.
[Code]....
As far as I know theres in no way to cahnge the alpha of a dynamic text box. I put one in a movie clip and when i try to change the alpha of it everything else in it changes its alpha but the not the DT box. Could someone plz verify for me that u can't change alpha and help me find a component that allows alpha control with a dynamic text box. thx in advance.
View 5 RepliesI'm relatively new to Actionscript, in fact, I just figured out today how to load text from an external source. I have another issue that I'm not sure how to handle. I have buttons for my main nav, a main text box, and a mini text box (both text boxes are loaded dynamically from external files). I want to have the mini text box load new external text files in the main text box. For instance, I have a button for music, which loads a list of songs in the mini text box. I want to be able to click on the name of one of the songs and have it load the lyrics in the main text box. I'm sure it's simple, I'm just new.
View 3 RepliesI have another issue that I'm not sure how to handle. I have buttons for my main nav, a main text box, and a mini text box (both text boxes are loaded dynamically from external files). I want to have the mini text box load new external text files in the main text box. For instance, I have a button for music, which loads a list of songs in the mini text box. I want to be able to click on the name of one of the songs and have it load the lyrics in the main text box.
View 3 RepliesProblem: I am trying to get a very simple text resize going, for my main content area in a flash website. My aim is to get a button, that on click, increases the text size of a dynamic text field.
[Code]....
This is what I tried, I am very new to Action Script, so excuse the futility of my code.
If you take a look at my flash movie you will see that I have draggable movie clips, which contain dynamic text fields. These text fields contain text drawn in from a simple xml document. The problem I have is that the text in the text fields is hedged right next to the border of the autosized text box. This makes them look untidy and in the worst case difficult to read. I wonder how I can add some margin to the left and right of the text to fill in some space.The code which formats the text boxes is:
with (main["dragAct"+i].dragActText) {
text = actText[i+1];
background = true;
[code]....
I have 4 dynamic text boxes which duplicates the text from a main input text box. How do I write a code to make visible only the dynamic text box I want when clicked it's check box.What is the CODE to make each "DYNAMIC TEXTBOX" visible when clicked on it's checkbox?
View 6 RepliesI have a dynamic text on the stage which gets updated (shows numbers) when some buttons are pressed.I just need to know if it is possible to show the first dynamic textfield in another dynamic textfield.Lets say the first dynamic textfield called "price" and the second one called "price2". when a button is pressed, the first dynamic textfield "price" will show a number. is it possible to show whatever is shown in the "price" in "price2" ?
View 1 RepliesI'm creating an XML-driven pie chart in AS3 with 2 text boxes in each pie slice. Both text fields are dynamic in the sense that they are populated by the XML doc and then told where to place themselves in the AS3. I've got them both using the same x and y position to place themselves at the moment (which of course puts them right one top of each other), but I'd like to make one of the fields (which acts like a label or a title to the larger number and % text field) place itself in a particular spot around the other text field. The result I'm looking for is to have the smaller "title" text field appear approximately 5 pixels above and left-justified to the larger "percentage" field.
Anyway, here are two sections of code that I've currently got. The first chunk, for the Tags portion, sets the position for the "percentage" text field using a good old x and y method. The second chunk, for Titles, is setting the position for the smaller "title" text.
//evaluate tags
private function evaluateTags():void{
for (s=0; s
[Code]....
I have 2 input textfields on the stage and 1 dynamic textfield.
-input1 is for quantity
-input2 is for page count
When a user enters a number into the page count it makes a calculation and places the outcome into the dynamic textfield. This textfield is for the individual price.All of this so far works. What I want to do now is create another dynamic textfield for the total. So the individual price is multiplied by the quantity and this result is put in the new dynamic text field. I have the code for that working but here is where it gets tricky (for me anyway).The total price is to start off invisible. When I roll over the individual price the total price is to appear (For a test lets just say when I roll over an area the total price appears).To stop cursor flickering this should be done inside a movieclip. So... I have create a movieclip and placed a dynamic textfield inside it. They all have instance names BUT how do I reference it in script?I need to tell the resulting calculation to be placed inside the textfield which is inside the movieclip. If it isn't inside a movie clip I can do it. But how to I reference it when inside one?
I've made a flash movie which will load four movie clips at runtime. Actually, the number of movie clips will depend upon number of "NODE" in XML file. Keeping XML file thing aside, I've tried hardcoded values; 4. Let me describe you the structure very well:
There is a main empty movie clip, instance name "mc_scroll" which will be only item on stage. In this movie clip, another movie clip whose identifier name is "blueMovie" will be loaded dynamically. Inside this "blueMovie" MC, there is a button instance name is "blueButton" and inside this button there is a "Dynamic Text" field instance name is "btn_text".
Phewww.. so long chain... inshort:
mc_scroll->blueMovie->blueButton->btn_text
Now, I can load 4 or any number of "blueMovie" inside "mc_scroll". But I also want to set the button text for each button inside each MC!! I'm sure you guys are getting what I want to do. But its not working. Below is the code:
Code:
//INSIDE THE MAIN TIME LINE
for(i=0; i<4; i++)
{
[code]....
how to assign the text dynamically which is inside a button and this button inside a MC which is created dynamically inside a main MC!
i have a problem with my flash menu. It's simple menu that contains one MC at start that works as button, u can edit size of the menu from external .txt file by changing the value of menu length. All that works fine , my problem is that every new duplicated mc contains dynamic text area as a label. Labels are also loaded from that .txt file , but that works only for the 1st mc because the newly created text areas in mc's dont have Instance Name set. How can i assign them from as?
View 2 Repliescan't figure out why the dynamic text boxes in my dynamic clip arent picking up the variable when I loop through this recordset!the trace (you'll see here right after I try two ways to assign the variable) traces the correct info back..
[code]...
I can't get the code to "know" which of the dynamic thumbnails has been clicked (by "know", I mean return an index value, say 0 through 7 if there are 8 projects, that I can use to access that particular project in the array of 8 projects in the rest of the code)... So if the third movieclip thumbnail were clicked, I'd like "2" to come up somehow... I've tried this code, which is kind of lame, I know, based off of the idea of each of the thumbnail movieclips' names ending in their index number:
Code:
//"this" is the button that was pressed; would return a string ending in
//thumberMC_<number of whichever movieclip thumb was clicked>
var: testString:String = this;
[code]....
Lastly, there's a dynamic textfield I'm trying to create that never shows up for some reason. Again, you could see in the FLA (in the "createDrawer" function around line 424).
I'm trying to input a dynamic text field into many dynamic movies. I use a for loop to successfully create 18 movies. I can't seem to get the text to be input dynamically however. The dynamic text field in the dynamic movies is named eventText. This code in the for loop successfully creates 18 movies:
[Code]....
I am using buttons with a dynamic textfield and a function to set the label for various different buttons:
public function setLabel(thisLabel:String) {
visibleLabel.text = thisLabel;
}
I set a label for each button:
btn_mc.button1.setLabel("2 | Al Sabkha Bus Station - Al Qusais Police Housing");
I have a dynamic textfield ... myText ... which I would like to use as a page title ... so once the button has been clicked, the dynamic textfield should update with the label of the button clicked.
I have a movie clip and in that movie clip there is a dynamic text box. I want that text box to display a dynamic variable name something like:
Quote:
_root.var_[this._name]
so the variable will be _root._var plus what ever the instance name of the movie clip it's in is, how can i do this?
Im using this xml "data.xml":
HTML Code:
<XML>
<salesreps>[code]...
I want to generate a mc for each rep with 6 text fields containg the 6 values for eash rep.So for this xml there would be 3 mc's with 6 text fields in each. This is one of my first times really diving in to xml parsing in Flash.
Is it possible in Flash MX to set the height of a dynamic text box based on the text that is currently displayed in that box?
View 3 Replies1) I've created a MovieClip and placed a Dynamic Text into this clip. I've named the text "text_txt";2) I've exported my MovieClip for action script (made it a class) and gave it name "ImageContainer"; And I deleted MovieClip prototype from stage (to create it dynamically later)
3) On main time line in frame 1 I've placed code:
Code:
var clip_mc:ImageContainer = new ImageContainer();
clip_mc.name = "myClip";
addChild(clip_mc);
[Code]...
ADDED: Ha, everything was easy! I should just change one string like this:
Code: MovieClip(getChildByName("myClip")).text_txt.text = "doh";When I placed MovieClip in the beginning everything works fine with Strict Mode! Problem has been solved
Is it possible to add text in and existing dynamic text box which already has text in it. Not at the end but in between some predefined characters or word.
View 2 Replies