Is it possible to add text in and existing dynamic text box which already has text in it. Not at the end but in between some predefined characters or word.
View 2 RepliesProblem: I am trying to get a very simple text resize going, for my main content area in a flash website. My aim is to get a button, that on click, increases the text size of a dynamic text field.
[Code]....
This is what I tried, I am very new to Action Script, so excuse the futility of my code.
I'd like to gather (at run-time) all dynamic text fields on the stage and push them into an array. Then I can load an xml of data and populate each dynamic text field in the array with a matching value in the xml file.
So basically I'm writing one class file I'd like to be used on many different swf files, each of which can have one or 20+ dynamic text fields. I'd like the swf to loop through each text dynamic field, throw each into an array and then grab an xml item with a matching name as that text field and set its textfield.text value from it. So actually if the dynamic text fields are just in a for loop then I guess I wouldn't even need to place them in an array, just not sure how to identify the dynamic text fields on the stage.
If you take a look at my flash movie you will see that I have draggable movie clips, which contain dynamic text fields. These text fields contain text drawn in from a simple xml document. The problem I have is that the text in the text fields is hedged right next to the border of the autosized text box. This makes them look untidy and in the worst case difficult to read. I wonder how I can add some margin to the left and right of the text to fill in some space.The code which formats the text boxes is:
with (main["dragAct"+i].dragActText) {
text = actText[i+1];
background = true;
[code]....
I have 4 dynamic text boxes which duplicates the text from a main input text box. How do I write a code to make visible only the dynamic text box I want when clicked it's check box.What is the CODE to make each "DYNAMIC TEXTBOX" visible when clicked on it's checkbox?
View 6 Repliesi have a problem with the line space flash creates when a dynamic text is loaded in a dynamic text field on the stage i put a dynamic textFild with istance name "profile_text". then im loadin in it a text. my text is written in the Notepad like this
[Code]...
i already set a Textformat to my dynamic text with i tryied to play with the "Leading".. but i think it something dealing with paragraph. how i can decrease spacing between paragraphs??
All I want to do is add text from my string to dynamic text field when I click dynamic buttons. What should the as code be for this? Here is my code. Right now I just have the click returning another shape.
[Code]....
Does anyone know why text put into a dynamic text box would look different than the same text with the same font, size, etc in a static text box. The dynamic text looks jagged and pixel-y, while static box looks normal.
View 7 RepliesI'm trying to pass text from an input text in frame 1 to a dynamic text field in frame 10. Thus when the user enters text and clicks the submit button it takes them to frame 10 and shows them what they typed. It's not working but I'm not getting any errors. Here's the link:
[Code]...
Currently I'm using javascript which works fine to pass text from textfield A to textfield B:
Code:
window.onload=function()
{
document.forms.form1.shirtText.value=document.forms.form1.KitGroupID_16_TextOption_38.value
}
Is there a way to pass the textfield A text to a dynamic text input (flash) as I'd like to use the font embedding flash offers. I can make it work when loading a value from a txt file but I'm not sure how to access the value identified above as KitGroupID_16_TextOption_38 and make it appear in a dynamic input box. Eventually I might want to have 3 font choices for the user but I'd like to just see if I can get this working properly first.
I've seen similar threads but couldn't find one with the exact same issue. I've a PDF / Word document with arabic copy when I try pasting that text in flash all the joined letters start appearing as individual letters.I've tried the dynamic text box solution in which you create a dynamic text box and assign the text to its variable that doesn't work. But strangely when you write arabic in dynamic text box (with out assigning the text to the variable) and double click to select the text box and its content the text starts appearing fine .. but when published its again all individual letter.
View 1 Replieshere is my code public function loadtext():void{ var text_arry:Array=new Array(xmldata.child(0).name); student_name.text=String(text_arry); } I called this function inside my timeline action window. but it is not working it said undefined...
View 5 Repliesi want to change the width of dynamic TextBox depanding on the ammount of Text using ActionScript 3.0.
[Code]...
I am looking for some sample fla files in AS2 where i can see a running example of dynamic text curve (bend) and spacing in between the text through their respective sliders.
View 0 RepliesWhat code can I use to shrink a piece of text in a dynamic text field to fit within a certain height and width.
View 1 RepliesI want to import an html file that contains just plain tet inside of a dynamic text box. The things that I have tried jus tmake the html file pop-up as a new page, but i want the information inside of that textbox.
View 2 RepliesI was wondering if it's possible to have a dynamic text box that can change sizes, without distorting the text displayed in it... I would also like to set it up dynamically.
View 4 RepliesI'm using the dynamic text scroller from [URL] found at [URL] Here's a link to my zipped files too... [URL]
1) I can't figure out how to have URL links in the text that loads.
2) How can I make the scroller refresh to allow for new text in the dynamic text area. The content changes alright, but the scroller stays in the same position and if it wasn't needed initially, the scroller disappears and doesn't return on new text.
I have the following code:
Code:
this.createTextField ("imageText",2,95,0,390,96);
imageText.multiline = true;
imageText.wordWrap = true;[code].....
The problem:If I uncomment either of the imageText.embedFonts lines, my text will disappear... but the trace(imageText.text); will still return the correct contents. It's as though embedFonts causes the textField to disappear.Possibly related, (but maybe not), is the fact that the vertical positioning of the font is off. Even though I create the textField at Y = 0, the text writes somewhere around Y = 10. I suspect this is something else, but I thought I'd add it just in case.
There's a movieclip, lets call it myMovieClip. Inside this movieclip there is a dynamic text box, lets call this one myText. Now to change the text within this text box that is embedded in a movieclip, it's simply:
[Code]....
However, what if there is a variable, called myVariable that stores the instance name of the text box. With only one text box I know it's pointless, but for the sake of example, lets leave it simple. So, suddenly the code looks like:
[Code]....
I have a text inside a xml file and i would like to display this text in a dynamic text field, using the xmlConnector.The files are at the following address:[url]............
View 1 RepliesHow do I center text in within the border of a multiline Dynamic text field?
View 3 RepliesIm using a standard font (Gotham rounded) within a dynamic text field. As soon as I embed the numerals within this text field the text lowers within the text field.Double clicking the field then renders the text higher up! It seems that the height it shows when I double click is the height it compiles atThe other strange and annoying thing is that my colleague working on the same project is using the exact same font and same file but this doesnt happen to him and so the font redners out differently when he compiles
View 1 RepliesI'm trying to use a dynamic text field to pull in html text that contains a bulleted list. Easy enough, that works. But the bullets dont take on the color assigned to the field. I've tried putting it in the html text and also using NewTextFormat and neither work. Can someone help me. This should be a simple fix, but I can't find it... I just want my text and bullets to both be white.
Simple code below. Using html text inside the flash document and having a dynamic field on the screen named txt. Code should turn text and bullets green, but it doesn't work, only text turns green
this.txt.html = true;
var my_fmt:TextFormat = new TextFormat();my_fmt.color = 0x00FF00; // hex value for green
this.txt.htmlText = "<P> This is the first paragraph</P><BR><UL><LI>Bullet 1</LI><LI><BR>Bullet 2</LI><LI><BR>Bullet 3</LI><LI><BR>Bullet 4</LI><LI><BR>Bullet 5</LI></UL>";this.txt.setTextFormat(my_fmt);
So, I have some basic actionscript code. It's a legacy site, so I'm using AS2. The line of code simply does this:
myField.text = "some text"
So, I select the text field on the stage, then ensure the font is embedded. All the glyphs I want are checked, but then when I compile and test, the fonts don't show up when the code is executed. Instead, the textfield is blank! What happened?! Where did the text go?
I should mention that the .swf which I compile is loaded into another parent .swf during runtime. If that parent .swf does not contain embedded fonts, is that why it's broken?
I made a scrollbar, but now I have a problem, need to read the number of lines of Dynamic text field and if it is greater than x show the scrollbar and hide if is less. Like this:
if(text.instance>7){
scrollbar._visible = true;
}
else{
scrollbar._visible = false;
}
My problem is how do I count the total lines of dynamic text field after load a external text.
is possible to align text in dynamic text control vertically to the middle? In flash CS3.
View 1 RepliesI am working in Flash CS5 and I have placed a text field (dynamic, classic text) on the stage. I am accessing it through Actionscript on the same frame like this:
var ct:TextField = TextField(getChildByName("Temperature"));
ct.text = "Hello world";
What ACTUALLY appears is this: So... The H, Ls, and D are gone. Mysteriously. Without warning. I am sitting here utterly confused. Is this just me?
PS. The text field is set to Myriad Pro Bold, a font on my computer, so it isn't like it's a font problem.
I have a static text in a swf file... Now i want to access that static text and convert in to a dynamic text during the run time... How to access the static text availbale in the swf file.... And then after accessing how to convert the static text to a dynamic text in flash AS 2.0.. Is it possible to do this one.. If yes means then give me a idea to do this one...
View 5 RepliesI'm having a problem adding numbers that are loaded to dynamic text boxes. I'm using AS 2 (Flash 8). The numbers are loaded to the textboxes from a text file using a loadVars command. The text boxes have instance names of TELEMATICS and BOOK - I have a third textbox called (instance name) RESULT - the text file is called TEST1.txt. My problem is that after trying (and trying) several solutions in tutorials I am unable to add the values in TELEMATICs and BOOK to get a (sum) total in RESULT. My code to load the numbers is as follows:
[Code]...