I want to make the scroller vertical for this very impressive XML: [URL]. I've been trying and have been getting somewhat close to accomplishing this but I feel like I'm hacking up the code to get there.
View 3 RepliesI am trying to use rhamejs slideshow (located here) and I would like to move the scroller to a certain position on the stage but I'm not sure how to do it. My stage is 900px wide with a nav bar along the bottom. All I want to do is move the scroller to the right of my nav buttons and left of another button that is in the far right corner. I would like to stay within that space which expands depending on your browser/screen size. The main stage is set up to resize based on browser/screen size and all the nav buttons are anchored. I basically need the left edge of the scroller to be 535px from the left edge of the stage at all timesI need the right edge of the scroller to be 185px from the right edge of the stage at all times. I have tried editing these lines but after the width of your window gets to a certain point, the thumbs stop scrolling or disapear completely:
Code:
if (nav == "nobuttons") {
scroller._x = 0;
[code]......
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart [code]
View 3 Replieshave a cool vertical scroller that I did try to convert to horizontal, but I could not make it work.
//code by Billy T
//set a variable
targY=0;
//set the x position of the dragger
dragger._x = 370;
[code]....
change vertical scroller to horizontal scroller?
View 2 RepliesI would like to use it as a horizontal scroller for an image gallery. Just to clarify a horizontal dragger and a horizontal stage motion for image viewing.
fscommand("allowscale", "false");
bar.useHandCursor = dragger.useHandCursor=false;
space = 20;
[code]....
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart and there is additonal functionality attached to it to affect it's movement which I'm not too worried about although it would be nice)
Code:
// set up content_mc info
contentRight = _root.content_mc._x;
[code].....
Alright, I've done the XML Photo Gallery Tut and am attempting to make the thumbnails scroll up and down instead of left and right. Apparently it's not as easy as switching X and Y. The tutorial is located a
View 3 RepliesI'm making a flash site with width 1024 and heidht 768px. But on some monitors it doesn't show all the flash. It's cut from the bottom. how do i show all of the content. I'm using this template: [URL]
I want to add vertical scroll for those who can't see all the flash. How do i do that?!
I am attempting to modify an example file that I found from a vertical to horizontal scroller. I changed the movie clip to horizontal, what I need to change to get the arrows to scroll the movie clip horizontally.
[Code]...
I'm attempting to switch the scroller I found on here from vertical to horizontal.
I got the movie clip to movie from left to right, but it doesn't seem to recognize how long the movie clip is now, because it stops before the whole movie clip is scrolled....see attached...
Using this code made by Genesis F5:
Code:
// EXAMPLE CREATED BY GENESIS F5 (www.flashkit.com)
stageheight = Stage.height / 2;
overhangy = ((stageheight * 2) - image._height) / 2;
[code]...
Basically, my problem is that i've got 15 buttons labeled Channel 1 to Channel 15, but when the page first loads up, it skips down showing the very last button at the bottom, rather than the very first button at the top. The top button is off the screen.
I have a <s:Scroller> surrounding a <s:Group>. The scroller works, but I want to increase the vertical step size on the scroller. I've tried everything, but am having no success. Modifying the scroller.verticalScrollBar.stepSize value in the init function seems logical; however, this approach fails.
View 2 Repliesgot stuck trying to design an automatic vertical text scroller. Here is what I set out to do:
- Have a news ticker like box through which text will be vertically scrolling.
- The textual content will come from an external text file.
- The text in the external file will also have click-able html links.
- When the mouse enters the content area, the scrolling would stop.
- If any link is visible in the content area at that time, the user will be able to click on it.
- When the mouse leaves the content area, the scrolling would continue.
Basically, it's an html marquee which you see in so many pages these days.
The following was my approach to solving the problem. Got very close and then got stuck
- I created a Dynamic Textbox and have it load from the external file. The dynamic textbox has multiline and autoSize set to true. So the size of it grows depending on the content from the external file.
- Next, converted the "textbox with external loading" into a movie clip and named it content_mc.
- Created a rounded rectangle (my viewing area) and converted that to a movie clip called mask_mc.
- On the stage, the content_mc is in one layer (content) and the mask_mc is in another layer (mask).
- Added another layer (action) and on the first frame of the main timeline, I entered the Action Script to set the mask_mc as the mask for content_mc.
- Also in this AS, I align the content_mc top with the mask_mc top so that the content is visible at the start.Then in the content layer, I inserted a movie clip "controller". This clip has two frames and all it does is it moves the _root.content_mc up by a fixed unit until the bottom of content_mc is over the mask_mc top. At that point, it sets the top of the content_mc back to the top of mask_mc.
Since I have little to no flash training, you can understand my excitement when the above steps worked and I got a fairly smooth scrolling text fitted in my viwing window. I could also click on all the links in my text. Yayyy!Then I took on the task of making the scroll stop and resume on mouse enter and leave event. What I did was:
- In the action script on the action layer, I simply defined two content_mc.onRollOver and content_mc.onRollOut functions. In the first I stop the controller movie clip and in the second, I play the controller movie clip.
The above strategy also worked as I wanted but it created a new problem! Whenever the mouse enters the mask area, the mouse pointer turns into a clicking hand cursor (the one you use to click on links); and it doesn't allow me to click on any of the html links anymore! It's almost as if the content_mc movie clip has turned into a button!
Regardless to say, this is unacceptable in my case if I cannot click on the html links in the original text content. I have googled quite a bit and must admit that I haven't had much luck (why else would I be posting here and other places?). I desperately need someone's assistance with solving this. Some of the approaches I have seen on google wouldn't work for me. For example, having invisible buttons for the html links. Of course that wouldn't work since my text is coming from an external text file over which I have no control.
I know that this has almost certainly been asked before, I know because every quarter at least one of my students brings in this site.[URL] My question is how I would go about making a parallax type scroller like this that works vertically and horizontally from the mouse position, and works with many more levels than this (like 20+ levels).
View 2 Repliesgetting a vertical and horizontal thumbnail scroller to work at the same time, based off of the xml photo gallery tutorial here on kirupa. I'm using FMX04 and I can get one or the other to work but not at the same time. Once I can get them both to work at the same time I would like to make the vertical set load a different set up thumbnails,I know it will involve editting the xml and hence adding to the xml loading into flash but I'm unclear on that also... on another note, is there an easy way to make the image holder resize to the image, so as to accommodate both vertical and horizontal images without skewing them?
Here's my code (as) so far...
Code:
// start of horizontal code
function loadXMLh(loaded) {
if (loaded) {
[code]....
I'm creating a vertical news scroller, that will eventually load in from an external text file and then just scroll the text in a movie clip vertically. I have this working but I have a couple of questions.
1. As the text reaches the end of the scroll I want it to start to fade out, I've added a IF statement to do this but it doesn't seem to fire. Why is this?
2. Even though I don't have any easing the scroll seems to slow down as its nearing the end of the animation, do you know why this is happening?
Code:
import gs.TweenLite;
import gs.easing.*;
var myTimer:Timer = new Timer(0,1);
myTimer.addEventListener(TimerEvent.TIMER, scrollNow);
myTimer.start();
[Code] .....
I've tried for hours and days to make my vertical text content scroller working in a flash fake 3d environment with rotationX / Y. But because of vector>bitmap conversion when 3d roationing, the scroller fails to works. I know the stratDrag method fails to work in a 3d environment. other than using PV3D or so ? cause I don't know how to work with PV3D, it's just tooooo complicated to get it for me.
View 1 RepliesDoes anyone know what I can do to change the claudio scroller so that it will scroll ease depending on the vertical mouse position?
View 4 RepliesI've got a horizontal gallery scroller that works great.The scroll bar snaps the animation to the closest image. You can view an example here:
[Code]...
tutorial of photo gallery, the problem is that the scroller for the thumbnails doesnt work, i mean it doesnt appear, theres nothing on the screen, i dont know what the problem is, the pictures above appear correctly but the problem is the scroller, i have tried a lot of thing but i cant get it to work, maybe the problem is that i used flash cs3, and the tutorial was made for flash mx 2004
View 1 Repliesam after an image gallery with scroller that displays thumbnails only.
I'd also like to have lightbox used in this as well instead of displaying the larger image in a window.
I would like to position relatively a scroller in my application like below.When I scale the image, I resize the scroller...
<s:Scroller width="50%" height="50%" >
<s:Group>
<mx:Image
[code].....
I've got a horizontal gallery scroller that works great.The scroll bar snaps the animation to the closest image. You can view an example here:[URL]I've added the blue buttons to try and scroll directly to individual images which works fine. But once i have arrived at the image the Left & Right buttons don't function correctly to scroll to the next and previous image.[URL]Below is the AS.
// Scaling Mode
Stage.scaleMode = "noScale";
Stage.align = "TL";
// Total width and height of this movieclip
[code].....
I want my page to be covered with thumbnails (not just in a row) then when you click on a thumbnail the image will open up either vertical or horizontal on top of the thumbnails. How can I do this without scripting or does anyone know of a simple way to do this with either Flash or another Product?
View 4 RepliesI am trying to build an image gallery as shown in the attached image.
The idea is basically to be able to add unlimited thumbnails (A,B,C,D,E and so on) at will by using XML and the latest uploaded thumbnail, be always in the first position (image A thumb). Also it's also able to add a title for the uploaded image ("Title here" as shown in the image)
The image A is by default always being shown on the right hand side with a title and description text.
I am creating a vertical scrolling gallery with two buttons but I would like to make it looping, so when you get to the last photo and you press the "forward" button it jumps to the first image. I have gotten this done, but it's now stopped to the last image and you have to scroll back to get to the first image..[code]
View 1 RepliesI am trying to create a vertical scrolling gallery. In the past I've created a horizontal scrolling gallery but can't figure out how to switch the horizontal scrolling gallery to a vertical scrolling gallery. I know I need to change the positioning of the movie clips from horizontal to vertical just not sure what to change in the code.
what I would need to change in order for my horizontal scrolling gallery to become a vertical scrolling gallery?
code:
digital_artwork.onRollOver = digital_artworkOver;
function digital_artworkOver() {
this.onEnterFrame = scrolldigital_artwork;
[Code].....
I've to create a image gallery with following features :
1) Vertical thumbnail list
2) I should know which image i've selected
3) It should have loading for both thumbnails & the main images
Plz take a look on the following site [URL]. I want exactly the same except the horizontal images.
[Url] This is kirupas great tutorial to make a vertical gallery along with a slide show. Normally this is fine but I find one problem here. When I clicked any thumbnail it will load the respective big image but the slide show portion is disturbed and it is not maintaining the correct numbering after clicking thumbnails. What I mean to say if I clicked No Six thumbnail it will load No Six big image and we hope that after that it will load No Seven, No Eight and so on as a part of Slide Show, but that does not happen all time there is some skipping of numbers in the big images after clicking the thumbnails.I posted the Code below. Can anyone help to make the No sequence to big image proper after clicking any of the thumbnails.
[Code]...