ActionScript 2.0 :: Vertical Photo Gallery With Slide Show?
Jun 29, 2009
[Url] This is kirupas great tutorial to make a vertical gallery along with a slide show. Normally this is fine but I find one problem here. When I clicked any thumbnail it will load the respective big image but the slide show portion is disturbed and it is not maintaining the correct numbering after clicking thumbnails. What I mean to say if I clicked No Six thumbnail it will load No Six big image and we hope that after that it will load No Seven, No Eight and so on as a part of Slide Show, but that does not happen all time there is some skipping of numbers in the big images after clicking the thumbnails.I posted the Code below. Can anyone help to make the No sequence to big image proper after clicking any of the thumbnails.
[Code]...
View 1 Replies
Similar Posts:
Jun 30, 2009
[URL]
This is kirups great tutorial to make a vertical gallery along with a slide show. Normally this is fine but I find one problem here. When I clicked any thumbnail it will load the respective big image but the slide show portion is disturbed and it is not maintaining the correct numbering after clicking thumbnails.
What I mean to say if I clicked No Six thumbnail it will load No Six big image and we hope that after that it will load No Seven, No Eight and so on as a part of Slide Show, but that does not happen all time there is some skipping of numbers in the big images after clicking the thumbnails.
I posted the Code below. make the No sequence to big image proper after clicking any of the thumbnails.
Code:
stop();
delay = 5000;
function loadXML(loaded) {
if (loaded) {
[Code]....
View 0 Replies
Nov 22, 2009
I've created a series of images that fade in and out. When i run the movie the transition from the last picture which fades out to the first image is not smooth. it transitions from a faded out image to a 100% opacity image
View 3 Replies
Jan 18, 2009
I try to make a photo slide show by using XML. where I get a step by step guide to build a photo slide show by using XML.
View 1 Replies
Jul 2, 2008
I am customizing the Photo slide show with thumbnails from this site. It is great. I was able to customize it so it would work with bigger pics (640 width X 480 height) basically wider pics then they are tall, but I also have pics that are taller then they are wide (480 height X 640 width).
1. in the thumbnail area the taller pics load over top of the pic before it and then there is a large gap after it.
2. the movie clip that loads the full size image aligns the pics to the upper left corner of the movie clip. I would like it to center the taller pic. I know I will have the same problem with the wider pics when I make the viewing area 640x640 they will look to high.
here is the code that is used:
function loadXML(loaded) {
if (loaded) {
xmlNode = this.firstChild;
image = [];
[code]....
View 5 Replies
May 17, 2010
Making a photo slide show to load as an external movie clip on my site when a button is pushed . Here is a link to the .swf file:[URL]..Basic problem: There is text that describes each set of 6 pictures. After the set of 6 pictures plays through the text is supposed to disappear and a new text appears to label the next set of 6 pictures. Problem is: the text doesn't disappear!
I made all the text layers a symbol/movie clip. I animated each text to disappear at a certain point in the timeline but when I test the movie the texts just remain there and build up one after the other.
When watching the movieclip, pay attention to the text in the lower left screen.
[Code]...
View 1 Replies
Jan 27, 2004
i downloaded the sample file of making slide photos, but i just can't make it run and load pictures automatically and loop itself continuously. how do i do it without have to hit next or previous? and all done with action scripting only without using keyframes? can someone please provide codes for me to learn or use? [URL]
View 4 Replies
Dec 28, 2010
I'm trying to find a banner slide show or tutor to build in flash a banner similar to the one on this page [URL]. I have searched on google and can only seem to find tutor or programs that are sinlge image banner rotators.
View 3 Replies
Feb 24, 2006
I was just wondering if it would be possible to show video files with some modifications in photo gallery?
View 5 Replies
Jan 10, 2010
im making a web page that must containt photo gallery (noncomercial use). i downloadet allready comleted photo gallery and now i need to update it.evrything works fine, but i need to add rolower image so it will show me before and after images when i rollower on image.
View 2 Replies
Sep 1, 2009
Just trying to make a flash photo gallery that displays all the image files in a certain directory with the usual photo gallery functionality.
View 1 Replies
Feb 21, 2004
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart and there is additonal functionality attached to it to affect it's movement which I'm not too worried about although it would be nice)
Code:
// set up content_mc info
contentRight = _root.content_mc._x;
[code].....
View 3 Replies
Oct 27, 2009
I am using currentSlide.gotoNextSlide to change between slides, however I can't make it stop playback on load of each slide.I have a motion tween with I need to NOT play automatically when the slide loads... but no matter how many iterations of stop(), gotoAndStop(), etc I use, nothing will stop the clip from playing when it is loaded!
View 1 Replies
Jun 10, 2011
In my asp.net application,I want to show the .ppt file using the slide show manner.
That's to say,user can upload .ppt file to my server side,then other people can browser these ppts in the page ..
Since I have googled "embed powerpoint in web page" ,it seems that there is not a good idea to implement this and support the cross browser,so I thought the flash.
This is a slide show using the flash: [URL]
What I want is show the contents of the .ppt in this manner(it would be better if it support the animations in the ppt)?
View 1 Replies
Oct 27, 2011
its for a photo gallery that I downlowded,the images fades in and out, but only start that when you click a button(timer).I'm trying to founf out where in the script I can change this, so that the photo's start automatically,rather than, on a button click.I have pasted the script below, is that ok, or would people rather a zip file of the files?
// (c) Copyright by Andrew DiFiore. All rights reserved. DO NOT REMOVE.
fscommand("allowscale", "false");
Stage.scaleMode = "noScale";[code]......
View 4 Replies
Aug 26, 2006
I found the tutorial by Kirupa
[Code]...
View 2 Replies
Dec 8, 2003
I finished Kirupa's tutorial on the "Sliding Menu" .The tutorial shows how to make the movie clip slide on the horizontal (x) but how do I configure the code to use both horizontal and vertical (y)? Do I just add a dest=" _root.ynew ;" and "pos = this.y ;" some how to this code?
stop () ;
MovieClip.prototype.move2 = function () {
dest = _root.xnew ;[code]......
View 2 Replies
Feb 6, 2009
I have an XML photo gallery, that when it starts it has a loader for the photos. It always starts with the XML file determined sequence, which is fine, but what happens is that the tabs on the right hand side of the photo loader go astray while it is loading the first photo. If the first photo was loaded instantly this wouldnt be an issue.Is there a way that I can preload that first photo, so that it is in memory when the swf file reads the XML file, allowing the first photo to be instantly loaded ?Amongst other things, I tried embedding the photo in the swf file, but it didnt work...obviously I have no idea what to script...I also created another scene, prior to the main scene, to preload the photo.. but it didnt work either, again probably used useless script...Going further in detail, this is the main script:
Code:
import com.mosesSupposes.fuse.*;
ZigoEngine.simpleSetup(Shortcuts, PennerEasing);
[code].....
View 9 Replies
Jul 10, 2009
I have been searching for a particular photo gallery, and haven't got far. Here is an example of what I am looking for. With the example I wanting the user to be able to click on a photo for it to appear in the box above. I am looking for a tutorial, so I can customise to fit in my client's flash website.
View 2 Replies
Jul 19, 2005
What I want to do is to make a gallery based on the tutorial gallery here (thumbs), but I want the user to be able to choose different galleries from within the movie. I figured that I could make a loop to cycle through the galleries, then nest another loop inside it to cycle through the pics, captions and thumbs. While I wrote, I constantly tested the output with trace commands, but when I tried nesting the loop I lost all output.. I'm pretty new to both Flash and Actionscript, so if theres an obvious solution I havent been able to see it.. This is my temp XML file:
[Code]...
View 2 Replies
Feb 17, 2008
i am trying to add extra images to the photo gallery attached. I would have thought it is easy and it seems so. I add an extra image to the gallery. I publish it. The html file shows the extra image in the gallery but the swf doesnt. driving me crazy, cant work it out?
View 14 Replies
Aug 16, 2007
Ok, so i'm working on this project here [URL]
I modified how it looks, but generally speaking, it's the same thing.
the files are located here; [URL]
I may have renamed something or another, but basically I'm trying to tell it to scale the loader if the picture is beyond a certain height. This is the code I added.
trace(picture._height)
if (picture._height >= 800){
picture._x = 180;
[Code]....
it's returning a trace of 0, I think it's because it's tracing it before the picture gets loaded.
I read someone else's case about how you'd have to replace how it's loading, in order to fix it.
i'm using Actionscript 2.0, in flash pro 8. It's publishing for flash player 7, and actionscript 2.0
View 3 Replies
Jan 24, 2010
I have a flash site that I'm working with that has an xml photo gallery as one of it's menu items. the photo gallery has three pages, all three containing thumbnail images that once clicked, load the larger image. The larger image dissolves in covering the page with the image. Once you click the larger image it dissolves out returning you to the gallery.
What I want to to do is to change the first page of this gallery to a video gallery, or player, leaving the other two galleries as image galleries. I tried simply replacing the images listed in the xml document to flv files and the flv file does not load. I simply want to know what it is I need to do in order to change this one page so that I can embed videos on it.
I've attached the Action script that loads the xml gallery in .txt format
View 6 Replies
Jan 15, 2010
i am trying to put some things together following the tutorials on this site. I did the tutorial 'Photo Gallery Using XML and Flash'and I followed it step by step and uploaded it with all the necessary files onto my remote server (xml file, Gallery folder, fla, swf, and html) - however, when I test the movie with flash, it seems to work fine (except the description test, my question to that later), but when I test it online it shows only the first image (but displays the correct number of images in the gallery); even when clicking the next button, it keeps loading the first image the first image. In other galleries (I use the structure for multiple galleries for my portfolio) the first image never loads at all.
Also, about the description text, in between the <caption> and </caption>, can I use <strong> and <em> and <br /> to change the appearance of my text? All it says is 'null'.If you want to look at what I mean check out my portfolio in the making. The problem with the first image displaying only is under 'paintings' and both the projects in 'design - packaging'. The second problem (no picture loading at all) is on some of the buttons in 'design - identity' (where I have not changed the description text of the tutorial yet).
Again,
View 3 Replies
Jun 15, 2003
I`m building a photo slide projector that calls a function using setInterval. But after the tenth call (about after 50 sec) the flash player stops working and crashes.On the first frame of the main timeline I set the following code:
Code:
// comando para fullscreen
fscommand("fullscreen", "true");
fscommand("allowscale", "false");
[Code]...
View 13 Replies
Jun 27, 2009
I have a project that I am working on the requires something simple but I can't find tutorials/examples of how to do this.
I need to create a slideshow so that when a user clicks an arrow - an image will slide off the screen and another image will move onto the screen (as if there is a long strip of images that move on and off the screen).
I have the images as a long continuous strip, and they should slide onto the screen with each click of the arrow. Then at the end of the strip of images I would like them to quickly bounce back to the beginning.
Something similar to what I want to do, only done in Flash[url]...
View 4 Replies
Nov 20, 2009
I am building a slide show in Flash 4. I have a series of slides that I want to automatically advance from slide to slide in order after 10 seconds. Is there a slide control in flash for this? Is there an actionscript for this?
View 2 Replies
Jul 9, 2011
I wonder if anyone can shed some light on why an xml slide show should speed up each time it is reloaded. I have downloaded an excellent slide show tutorialand being new to As3 I very basically attached and removed the downloaded slide show on and off the stage with a simple button which fired the code:addChild(); to make the slides appear and aremoveChild();to remove them. This worked fine until I quickly realised that each time the slide show was re added it had doubled in speed until after a few re loads it was wizzing through
View 5 Replies
Mar 19, 2009
I have a slide presentation that was created in Flash CS3 and I now need to get it into Quicktime format. I have been able to get the export to movie function to work but the resulting video is only the first slide no matter how long I set the "After time elapsed:" setting to in the QuickTime Export Settings dialogue box. This makes sense because the slide show requires the user to press the space bar to proceed to the next slide.
View 1 Replies
Feb 21, 2004
I am trying to build a vertical slide scroller based on a tutorial for a horizontal slide scroller and am having difficulties undertanding what values I need to change in the code for the slider mc in order to make it work. The horizontal slider is quite smart [code]
View 3 Replies
