ActionScript 2.0 :: Activating The External .swf Into A Blank Movie Clip In The Main Movie?
Oct 10, 2002
I'm still a rookie in flash and I'm having a little bit of trouble with some actionscript. I've gotten as far as placing the buttons and assign the correct actionscript for them to work. Everything is working fine with the buttons activating the external .swf into a blank movie clip in the main movie. Ony thing is, I would like the external movie assigned to the first button to open once the movie is loaded.
I thought by using the same actionscript i used on the button {and removing the on(release) tag} and placing on the first frame of the main movie would help, but it doesn't.
View 2 Replies
Similar Posts:
Jul 29, 2009
In what combination of as2 code would instruct a preloader to recieve bytes loaded and bytes total in addition to loading a external swf file into a blank movie clip? I've seen countless issues regarding the same problem but still haven't goten a clear answer. I dont want to use the video player component standard on Flash. I want a preloader to preload a external swf file and play it inside a movieclip.
View 5 Replies
Jan 28, 2003
1)I was able to load an external .swf file into a blank movie clip (A TARGET CLIP WHICH I CREATED using createEmptyMovieClip) 2)Also by placing a button on the stage I was able to remove the movie clip
BUT I WOULD LIKE TO BE ABLE TO KEEP ALL MY CODE IN THE FIRST FRAME. I would like to Remove the Movie without putting the code on the button. But it didn't work.
Here is the code on the button that Does work
[Code]...
View 4 Replies
Jun 27, 2006
if it is possible to load a movie clip into a blank movie clip?On my main timeline I have a button (mode_btn) and I want to be able to click it and load another movie clip (mode_options_mc) into a blank movie clip I have (mode_empty_mc). Is this even possible?
View 11 Replies
Mar 9, 2009
I have a button which, when a user drags it onto a movieclip is supposed to cause that movie clip to advance to frame 2. What I've used so far is this:
Code:
on (press) {
startDrag(this);[code]..........
The button drags fine, but when released over the movieclip nothing happens. I've tried using "_parent.slide1_mc.gotoAndStop(2);" instead to no avail.
View 1 Replies
Dec 23, 2004
I want to load six seperate .swf's into the main movie while the main movie loads too. So in simpler words, i want to be able to load all of the swf's the same time i am loading the main swf.
View 2 Replies
Feb 23, 2011
I've got a main timeline .swf file called "blank.swf" which contains nothing but two blank movie clips one called called "pproduct", the other called "ppalette". In the script frame of this main timeline I use the simple "Loader = new Loader();" method to load a URL of an .swf file into the "ppalette" movie clip. The "ppalette" movie clip contains several color chip buttons, each of which use the same Loader method above to load an external .swf into a clip. Here's what I want to do: let those color chip buttons, when the "blank.swf" file loads, be used to load an .swf movie into the "pproduct" clip on the main timeline. I'm wanting to be able to swap depths with various movie clips which will take out the movie which has the palette, but I want whatever that palette has loaded in the original "pproduct" clip to stay there.
[Code]...
View 3 Replies
Oct 10, 2011
I've been trying to figure this out all day, with no luck - so I'm hoping someone here can help a girl out with her code .I'm working on what is essentially a 'character profile' page, in which you can scroll across the page to see different characters, and clicking on them will bring up a short profile.However, I've set up these different characters as separate buttons within the scrolling movie clip and can't seem to get them to activate.Here is the code I've used so far:
--
p1.visible = false;
p2.visible = false;
var tar:Number;[code]....
It doesn't work.However, using tutorials and trying different things, all I have achieved is making all the profiles appear at once, or having them activate when you press anywhere on the movie clip.In AS2, I would have used myMC.b1 to target it,
View 9 Replies
Jul 22, 2005
I have a main timeline with a blank movie in it so that I can click the menu and various swf's load into it. This all works perfectly. Then, I have a contacts page with a form that sends to php which all works perfectly. The thing that doesn't work is that when I click submit the thank you frame immediately afterwards doesn't play. The code I've typed is: On the Submit Button:
on (release) {
form.loadVariables("email.php", "POST");
}
On the movie clip:
onClipEvent(data){
_root.nextFrame();
}
This all works fine in Publish preview but once uploaded to the servers it fails unless you type [url]....then it works fine. Is this something to do with layers and levels etc?
View 3 Replies
Mar 5, 2009
I have a movie clip on a liquid layout page that seems to be appearing when I resize the window. The movie clip is supposed to be transparent until you roll over it but when I drag the window open it triggers the movie clip.I think it has to do with the onClipEvent (load) part of the code but I am not sure. Below is the code that is attached to movie clip that is being triggered. Here is a link to view the swf file: http:[url]....how to remedy this?
note: I just opened this up through the browser from that link and it does not do it but when I publish the movie it does it on my computer....? onClipEvent(load){[code]....
View 2 Replies
Apr 30, 2003
I am creating a full site in flash. The main movie has an empty movie clip in the middle of the movie to load external movies as the user clicks on the links. Everything has worked good so far as the linking has only gone 1 level deep. However, when I created a new external movie, and had buttons on it for another external page, but yet to open in the main movie, I can't get anything to work. Example.... In the main movie, the user clicks on the archive link, and the external archive movie is loaded into the main movie. Now, on this archive movie, there is a button on it that links to a another movie (say text effects.swf). However, when they click this button for text effects, I can't get it to load into the main movie clip and replace the archive movie that was currenlty there.
View 14 Replies
Aug 30, 2006
I am looking for a way to fade in a white movie clip over my main movie when a button is pressed.
(i.e. When you press a button, a white rectangle will fade in over all other layers and then fade out after a couple of seconds. This is to make it look like the different pages are fading in and out without having to build the transition over and over again.)
View 8 Replies
Nov 17, 2011
I have a flash banner that includes a movie clip of the logo being animated. I want the logo animation to only run at the beginning of the main "movie". Currently I have to find the length of the entire movie (for ex. 500 frames) then put a key frame in at the 500th frame of the logo movie clip. I know there has to be a correct way to do this...Do I add a frame name at the end of the main timeline and somehow in AS in the logo movie clip say "when you reach X goToAndPlay(1);"?
View 1 Replies
Jun 20, 2006
i'm trying to play several movie clips, one after the other from one main movie clip.i've got 8 movie clips, "m1.swf", "m2.swf", etc. "m8.swf", and one main movie clip, "play.swf".i've tried using loadMovie, but it only plays the last movie clip. this is what i've got. in the main movie clip, i've put a play button, and the actionscript i have in the button is:
on(release)
{
this.loadMovie("m1.swf",play);
//this.unloadMovie("m1.swf");[code]....
is this wrong? how can i get this to work correctly.
View 4 Replies
Dec 6, 2009
I have my flash document set up in the following way: On the main timeline I have my buttons that I want to play movie clips embedded inside a movie clip on the main timeline.However, when I click each different button, the current movie clip stops playing and then the movie clip corresponding to the button plays.
I want them all to be able to play at once. So for example you push button 1 and the alien plays, but half way through you could click button 2 and the alien clip would keep playing, but also the helicopter clip would begin to play as well.Here is the code I have so far:
building_btn1.addEventListener(MouseEvent.CLICK, alien);
building_btn2.addEventListener(MouseEvent.CLICK, helicopter);
function helicopter(e:MouseEvent):void {[code]......
View 1 Replies
Jan 11, 2004
I have a problem with buttons and transitions and it is similar to a problem I had a couple of days ago that I posted and that was sorted out. I have two buttons onstage (they're inside a movie clip) inside the movie, on the button one I have the following
[Code]....
I have similar code on button two and this does indeed make the buttons move into place as required. My problem is this, I need to load in external swf files into an empty movie clip on the main stage called container. These External SWF files have transitions and this is where my problem is. If I place a normal button on the stage it works but not if the button is inside a movie clip and has actions applied as above. The code next is what I have believe should also be placed on the button to make swf transition one load in.
[Code]....
View 4 Replies
Apr 26, 2009
I'm trying to make a flash website that has clickable buttons that will play different movie clips. But I dont know how to make it to just play the movie clip with the button you click without playing all the movie clips on the main timeline.
View 1 Replies
Feb 24, 2010
I cant get the swf to load into my placeholder movieclip "gallery_ph"... instead it just opens a new window with the loaded swf inside.
here is my xml:
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<NAVBAR>
<BUTTON NAME='Neuro' LINK='swfs/gallery/atlas/neuro.swf' TARGET="this.gallery_ph"/>
</NAVBAR>
[Code].....
View 2 Replies
Aug 25, 2010
how would i go about using a draw code(Code that allows users to draw within the flash) and restricting it to a certain size and location on the movie? for instance a 75x75 box located at xPos=200 and yPos = 150?
Like would I have to use a blank movie clip for the position? then make an invisible box within it to restrict drawing area?
View 1 Replies
Feb 24, 2003
How do I remove a movie clip from the main movie?I've tried setting the alpha,but technically it is still there.Removing and deleting movie clip only works if the movie clip is duplicated and I don't want the movie clip duplicated.
View 1 Replies
Jun 16, 2005
I have instances in my movie layed out as such
_root contains
[sliderX] which contains
[holder]
Where X is a number from 1-500 inside [holder] is a button that when pressed should load an image into new browser (does this fine) then move the main movie to it's next scene. this is when it fails. I have tried
[Code]...
View 1 Replies
Feb 1, 2006
- i have 3 separate movie clips (a,b,c)
- my main movie is (a) and when i click a button there, it will go to external movie (b)
- under external movie (b) there's a movie clip that includes my animation and content button
- if i click on the content button on movie (b), external movie (c) will pop up [ it will not replace movie (b) but will just overlap it, it's like a small pop up ]
i did the actionscript and when i'm testing external movie (b), it's working... it's showing/popping up movie (c) but when i tried it on the main movie (a), the movie (c) is not popping on the (b) err, sorry if it's a bit confusing / how i explained it. but hopefully somebody will get the idea. and it won't also return on the main movie (a) when i click on a link from the external movie.
View 5 Replies
Jan 9, 2010
my problem is that i need to make a reisze, cause the screen resolution for other users. My main and news movie works perfect, but the others movies re-scale everything bigger. The problem of the external loaded movie is: this movie needs the funktion:
Stage.scaleMode = "noScale";
Stage.align = "TL";
If i dont have this code inside the movie is not going to resize fullscreen into the main movie. Inside this movie im scalling photos and some mc's You can take a look what i mean under: [URL]
If you take a look to the bar where the Number of pictures (30) are you will see that the lower bar and the pictures is not going to scale to fill the full screen if i delete the this code;
Stage.scaleMode = "noScale";
Stage.align = "TL";
View 3 Replies
Jun 21, 2009
Is there a way to make a movie clip based on a blank object?the way i usually make one is by drawing a rectangle and making it a movie clip.
View 1 Replies
Jan 1, 2004
I have a looped sound and some components in my main movie (scroll bar) which for some reason is really bogging down my swf and causing the preloader bar not to show up until like 46% or something ridiculous.
So I am trying to solve the problem by having a preloader swf as suggested by Kode in this thread. However, now all my targeting is messed up in my main movie. Everything that was _root has to change but I can't tell what to load it into. I tried using _parent, _parent._parent, _root.container_mc (which is a blank movie clip created in the preloader swf that main is loaded into after the preloader is 100%) and others but nothing works. Even the simple looped sound which was originally just _root.backsound.start(0,999) can't be targeted. how to target things on my main stage based on the preloader swf?
View 14 Replies
Oct 26, 2010
Is it possible to use a movie clip to block the mouse from activating the stage MOUSE_OVER event?
View 4 Replies
Sep 14, 2010
I have a menu bar that has 2 Drop down menus. Each drop down is a separate movie clip, with 3 buttons inside that are separate movie clips. I have a class set to the buttons that are movie clips for a roll over effect. But when I mouse over it does not work. Also on the main time line I tried to add a like to a web page but it did not work. But I only have this problem with the movie clips that are inside the drop down movie clips.
Why is this? How do I add roll over actions and external links to movie clips that are inside of another movie clip? I really need some help this is a problem I have been having for about a month or more. I am still a AS3 newb and this is my first time using classes. The other classes I have work with everything else, Im just having trouble with the movie clips that are inside movie clips.
View 11 Replies
Jul 25, 2006
assigning a level for the external movie(reseller_locations.swf) loaded to a moivie clip(clipHolder)
code
loadMovie("reseller_locations.swf", this._parent.clipHolder);
View 1 Replies
Jul 2, 2006
I would like to set height after I load an external movie into a movie clip.
For example,
this.body_mc.loadMovie("body_about.swf");
_root._height = this.body_mc._height;
I always get height as 0, because body_mc is an empty movieClip.
how to access the body_about.swf height as soon as loaded the movie into the empty movie clip?
View 2 Replies
Nov 24, 2005
I am targeting a a movie clip. The problem is that all the syntax I have found for targetting clips looks like this: _root.sample_mc.sample2.mc. etc. The problem is, my target clip is in an swf that I've loaded into a container clip from my main timeline. So, essentially, I have a home.swf that loads menu.swf into a container called 'location'. In menu.swf, I have an MC called center, which contains the MC I am targetting called 'target'.
View 2 Replies
