i am trying to attach 78 movieclips in a 3 column grid, each column needs to have 26 names that need to be ordered and numbered from top to bottom, not from left to right. so the top movieclips should be 0 26 52, not 0 1 2. i am using the following, but can't figure this one out.
[Code]...
I'm trying to create a grid of instances of (74x56) clips, and each one of the created instances must be named and numbered in an order so that it goes from left to right, top to bottom. I have been trying this with attachMovie and duplicateMovie, but unable to figure all out. can someone give me a hint?
View 14 RepliesI'm working on a MP3 player that displays the tracks in a grid layout. I've got it working but when it attaches the track it counts each track as a row. How would I identify each row has 4 tracks?
var cols = 3;
var rows = 2;
var vspace = 4;
var hspace = 4;
var xpos = 4;
var ypos = 4;
var wclip = menu_mc.bttn_mc.bttn._width; //165
[Code] .....
I'm currently working with the OLAPDataGrid component and got stuck at a relatively simple task: I want to style the last row of the grid differently from the rest, so my cell item renderer needs to know whether he's rendering the last row with content in the overall grid, including those rows currently not rendered because they are outside the visible grid space. AdvancedGridListData's rowIndex property only gets me the row index of the renderer relative to the range of visible grid rows, i.e. when I scroll down the grid, a data item with an index greater than 0 gets the rpw index = 0.
View 2 RepliesI need to create a simple multiplication grid where children will fill the grid. Its an empty grid at the begining, when they start the time start as well.Its a grid of 10 x 10. when they enter the last number, the grid should show what they did wrong and the time they spend. It's an idea of how it could work but if anyone has something that looks like this.
View 6 RepliesI want to make a square grid of fixed side length but varying grid number using code.That is, the number of grids should be specified by the user (say 3*3) and after pressing a button, the stage should be broken into 3*3 grids.I don't want any code, just a method on how to do it. I have tried it by using simple loops but the method just fails for no reason I can figure.
View 5 RepliesWhenever I add paddingRight to a column in the flex grid, it adds the padding to the header as well.Is anyone familiar with how I can add paddingRight just to the column and not to the header? Below is the column code where I was specifying the padding.
<mx:DataGridColumn width="60" headerText="Type" dataField="Grade" headerStyleName="headerLeft" textAlign="left" draggable="false" resizable="false" headerRenderer="GridHeaderRenderer" paddingRight="5"/>
I really like the thumbnail gallery for its simplicity and beauty. But I would like to ad or vertical scroller (I'm unable to find it here too, maybe I'm blind, just I'm more at the end of my seeking options) or a make a grid thumbnails, that will show 2 columns of thumbs and 5 pictures in each columns, then under the 2 columns i would like to ad a sort of arrow or button that if my gallery have more then 10 pictures it will go on the next thumbnail list. I'm not looking for any extra fading effects or special movements. Just would love to have a single thumbnail grid on side, with option to have lists of thumbnails by 10 if there is more then 10 pictures or so.
View 14 RepliesI have a mx:Grid component in my flex application. But I would like to resize it by clicking and dragging in the border. This component doesn't allow doing that.I want to put a panel in each gridItem of this Grid component and resize it.
View 1 RepliesI'm building a small editor that allows users to place electrical components onto a grid so that they can see how electricity works. I have built a grid using an array and for loops and attach movieclips dynamically to that grid. What I want the moviclips to do is to look in the four spaces either side of itself i.e. up, down,left and right.I have managed to pull the grid coordinates out of the grid which enables me to tell the clip which grid space to look at but have been unable to successfully get the code to work.Here is my code:
myGrid = [[1,1,1,1,1,1,1,1],
[1,0,0,0,0,0,0,1],
[1,0,0,0,0,0,0,1],[code]....
I'm trying to code the snap to grid functionality. The dragged object should snap to the grid if the distance between the object bounds and a grid line is less than 5px. I found a way to do it if the object's rotation is 0 but it doesn't work if I rotate the object. I need a different approach. Can you point me into the right direction with the algorythm or any source code?
View 3 RepliesI am trying to create a puzzle like game (a chinese puzzle game called tangram). I am wondering what kind of functions should I use to create a "triangular" grid i.e. something similar to this ?[URL] What should I do to make the movie clips to perform the "snap to grid" effect to this grid?I have tried to draw my own grid and used the "cacheAsBitmap" function to implent it, however it doesnt seems to be working.
View 6 RepliesI am a newbie in flash and I am trying to create a puzzle like game. I am wondering what kind of functions should I use to create a "triangular" grid i.e. something similar to this ? [url]... What should I do to make the movie clips to perform the "snap to grid" effect to this grid?I have tried to draw my own grid and used the "cacheAsBitmap" function to implent it, however it doesn't seems to be working.
View 4 RepliesI'm trying to dynamically draw out an isometric grid but I'm hitting a few problems, currently I'm using a matrix transformation to get the grid to look more isometric that tile based but it has it's problems so I want to add the grid with out using the matrix transformations. currently I have..
[Code]....
I tried to draw it out using Sin ,Cos and Tan functions to try to set the coordinates but it didn't behave like I had expected,
Through attachMovie I have loaded an mc from the library onto the stage into "holder_mc".
myButton.onRelease = function () {
if (currentWork != "holder_mc.myWork1_mc") {
holder_mc.attachMovie("myWork_mc","myWork1_mc", getNextHighestDepth());
currentWork = "holder_mc.myWork1_mc";
}
}
This works.
However, there are a couple of buttons (mc) inside "myWork1_mc" which skips through a few slides in the myWork1_mc clip that I cannot target. I thought using:
holder_mc.myWork1_mc.buttonName_mc.onRelease = function () {
trace("MC_pressed");
}
... would work. My curser doesn't even change to the hand symbol. How do I target an dymanically loaded MC from the library which is inside an empty holder MC on the stage via attachMovie? What am i missing? Believe me, I have spent hours trying to google it.
Note: at this stage there is no other script on "holder_mc", but there will be at a later date, but I'll cross that bridge when I get to it. Also, the buttons work when I place the MC onto the stage and not use attachMovie.
i was wondering if it is possible to use attachMovie with variables using flashvars from html. im kind of new to AS and would like to know if anyone could help me out here
i need to make a single SWF in wich some movieclips can be replaced by others through the html code without editing the swf file.
i already know how to enter the variables on the html, but i dont know how to apply this to attachmovie command in the flash file.
So a clip is attached to a clip, and that works fine, but how do I get code on to the attached clip? I've tried duplicateMovieClip...but it's not working...
View 1 Repliesfor (i=0; i<policy.length; i++) {
newOpt = Stocklist_MC.attachMovie('Option', 'Option'+i, i);
I've got a ScrollPane on the root stage. This loads a MC called 'Stocklist_MC' (this also has a linkage/export name of 'Stocklist_MC'). When I try to use '.attachMovie' to the movieclip (Stocklist_MC) inside the ScrollPane nothing appears. All the AS is on frame 1 of root. Everything works when I use '.attachMovie' with _root. for (i=0; i<policy.length; i++) { newOpt = _root.attachMovie('Option', 'Option'+i, i); Also, if I drag Stocklist_MC to the stage I get everything working but list gets cut off at bottom, which is the reason why I need it in a scrollPane.
the traces get triggered, which means so should the attachMovies, but nothing else seems to happen?[code]
View 3 RepliesI've been battling this project, and finally got it all wrapped up and working, and was feeling pretty proud of myself, and then I went and posted the exact same .swf on the web and it doesn't work anymore.Specifically, there are a bunch of icons which are placed into the FloorMC which then attachMovie a copy of themselves into a LegendMC and UtilityRefMC, but they dont seem to be attaching anything when I run it through a browser.[URL](I'd love to attach the swf and fla to this message, so you could take a look at those, but apparently that would be crazy.) thought perhaps it had to do with me using _root, but I went through and changed them all out to _globals and _parents and it still no likey. Furthermore the Comment Box in the bottom left gets triggered by _root commands form all sorts of different levels, and it seems to work fine, both on the web and off.
View 6 RepliesWhat I'm trying to do is simply this:
<variable> = mvcShip
var ship1 = _root.attachMovie( <variable>, shipName + _root.getNextHighestDepth(), _root.getNextHighestDepth() );
What i am trying to attempt here is to make the variable equal to the name of an item in my library. (Im using this to use different ships in an old arcade-style vertical shooter). This is meant to make a ship appear on stage.
When <variable> is replaced with a library item (eg. mvcShip), it works fine, but if the variable is in place, i get a trace value of ship1 as "undefined", and the ship doesnt show up on the stage.
BTN_2.onRelease = function() { gotoAndStop("ans2"); Comments_txt2.text = title[2].comments[0].nodeValue; toolName_txt2.text = "Tool Name: " + title[2].hidden[0].nodeValue; mclip.loadClip(title[2].image[0].nodeValue,
[code]....
I am using this simple line:
ph_out.attachMovie(ensembles,ensenbles1,1);
where "ph_out" is an mc that receives the movie"ensembles" is an mc that I want to load in ph_out and it has as linkage name: "ensembles"
I have a linked movieClip in my library with the identifier "arrow" i want to run a for loop and attach this clip to movie clips on my stage named blank0 blank1 blakn2 and so on.
[Code]...
I am trying to create a pair of custom drop down menus (one for states, and then one for each states counties). I have an XML doc that contains all this info, which I am parsing out into an array(sc). What I would like to happen is when the user rolls over the states drop down arrow(stDropArrow_mc) that I run a for loop which attaches some movie clips to a states movie clip already on stage(states_mc), fills in the state name in a display text field(display_txt) within the attached movie, within the "states_mc" on stage(root timeline). so essentially(states_mc."NEW ATTACHED MOVIE CLIP NAME".display_txt.text) Here is a code sample that I am using...
[Code]...
When you attach a movieclip taken from the symbol library to the Stage, by using the attachMovie function and its Linkage name, do you have to - previously - place a dummy instance of the mc anywhere on that Stage to get it works ?
View 5 RepliesI am trying to revise the very first flash project I ever did and it's become a complicated mess. I have created an interactive atlas. I am using my favorite map zooming and panning tools supplied by Senocular which can be found here: http:[url].....For the panning/zooming/drawBox tool to work the map features must be buried deep within several movieclips. There is one level at which you can put buttons that aren't effected by the code for the panning/zooming etc. Buttons have to go on this level or higher if you want them to work.
The way my atlas is set up - there is a main interface that has these tools plus the menu system. The menu (xml; created by Lost and Sen - brilliant, thank you) loads in two external swfs - one is the map itself and the other is a set of "controls" for that particular map (radio buttons, check boxes, text links, etc.).I have a couple of external swfs that have buttons on them that do things when you roll over and off them. If I have these buttons sitting on the map then when it gets loaded into the main interface they no longer work. So I am trying to use attachMovie to attach them to an MC within the zooming tools in the main interface at a level they can be active.But it's not working.I am guessing it's because the code to attach them is being fired before the external can be loaded into the interface. So I'm not really sure where to fire the attachMovie code. Does it go with the external? Does it go with the controls for the external?
I can supply code if needed though like I said, this file is a mess. There are 15 external maps with 15 "control" files. Plus the main interface, plus some other miscellaneous files.
I have a loop and in it i am attaching a movie clip (basiccly its just a row with data). The movieclip has a alpha fade in it. Now I want to delay each attachmovie function so that the movies are attached one by one rather then trow them all on the screen at once. (plus it looks better with the alpha fade).
I tried the setInterval but it wont work (ex.:Interval is 1 sec, and if im going to attach 6 MC, flash wait 6 * 1 sec, then show them all)
And is it possible to attach a movieclip inside a othermovieclip thats not on the same frame (the other MC is on frame 10)?
I want to attach a MC dynamically so that I have 12 rows and 12 columns of _mc box on the main stage:[code]I think it can be done only with a nested loop but so far, well, my head's in a loop!
View 11 Repliesode:
_root.curenemno=1;
_root.curenem=[["clam",5]];
Then when as a current temporary sort of arrangement i attached this using the attachmovie function:
Code:
_global.enemies = _root.curenem;
_global.enDataArray = [[]];
popped = _global.enDataArray.pop();[code]....