In a flashfile I have a cirkel and the user shal fill the circle with different parts.
Code:
var t = attachMovie("fifth", "fifth1"+counter5_1, _root.getNextHighestDepth());
cirk1Array.push(t);
[code]......
When I draw a path with the pen tool, and fill it, it seems as if the shape now has two parts. If I drag the filled area around, it's breaking apart from the path (or border). So how can I make this one entity?
View 3 RepliesI`m working on a app that you can draw lines.....like circles, rectangles... my problem is when a user draw a circle for example....i wanna be able to paint (change color) inside of this circle. I`ve tried working on Shapes with cacheAsBitmap = true and Bitmaps with BitmapData but it doesn`t seens to work.
View 4 RepliesI am trying to make a timer and I want a circle that is always shown.It starts out green.As time progress' a growing red pie slice begins to occupy more and more of the circle until the entire circle is red.The restrictions are that I can't use sprite, so it would have to be done with UIComponent or some other format. Additionally, I can't use degrafa. The SDK I am using does not support these methodsMy only hold back is that the SDK I am using does not support rotation, but I think I can make this all work.For others that can't use sprite, just substitute UIComponent where sprite is.I am pretty sure rotate is the only way, but is it possible to make it start at the 12 o'clock position without rotate?
View 1 RepliesI am trying to dynamically draw a circle and fill it up with some color. Drawing a circle is pretty easy job for me, but fill it up with some color seems not happening today.
PHP Code:
Circle function starts
function fnDrawArc(mc,x,y,r,angle){
mc.beginFill(0xFF0000); // this is not working....
mc.moveTo(x+r,y);
for(i=1;i<=angle;i++){
[Code] .....
I have a graphic symbol of a circle that has a radial gradient fill of yellow to red. All I want to do is have it change from yellow to red to red to yellow. I tried the advanced color settings but that doesnt quite do what I want. With the color settings.. it changes the complete tint of the object. I want it to look like it is tweening the gradient not the object. So if the object had a yellow center with a red outer edge I want it to chenge to a red center with a yellow outer edge. How do I accomplish this?
View 1 Repliesi'm trying to build a circle using lines. each line starts in the centre of the circle and is as long as the circle's radius. using a loop along with sine and cosign waves, i can build the circle using the sine and cosign to mark the coordinates of the lineTo parameter.
my problem is with the line thickness parameter of lineStyle. i would like the ends of the lines to match up perfectly, no matter how big the circumference of the circle, but i can't figure out a proper method for the line thickness.
//this is what makes sense to me, but it still creates some gaps
lineThickness = 1 + (((nRadius * 2) * Math.PI) - 360) / 359;
for(var i:int = 0; i < 360; i++)
[code]....
to make the ends of the lines meet up at the circles circumference, without any gaps, i need to widen the lines to fill in the space that's remaining. what makes sense to me, but doesn't work, is to subtract the 360 from the circumference, then divide that number by the amount of empty slots between the lines (which is 359) and adding that number the the thickness of 1.
what's concerning me is that the lineStyle thickness parameter is a Number, but seems to take only values between 0 and 255, so i'm not sure if a floating point number like 1.354 is a valid thickness.
I'm working on a project for a client, they want a simple drawing api which requests the user to draw a circle, or a shape on screen. The circle is then analyzed and a Score/Percentage of correction is returned. The drawing I have covered, how to assess the drawn circle against a perfect circle?
My first idea was to put invisible trigger points around the circumference of the shape and check for hit tests when the user is drawing. Another would be to track the dimensions of the left, right, top and bottom most bounding box and then find the radius, or something to that effect.
I have a circle and a square on the stage. When you click on the square the circle will go to "circle._x = 300" when the circle is at 300 I want to make it when you click on the square the circle will go "circle._x = 45"
Code:
moveCircle = function () {
circle._x = 300;
if (circle._x >= 300) {
circle._x = 45;
}} square.onRelease = function() {
moveCircle();
trace(circle._x + "is the position of the circle");
}
I need to allow the user to create a circle with a specific radius and colour in a certain frame (lets say frame 2), and then add that circle as a symbol to a different frame (say frame 1). First off, im simply creating a circle.. This is what ive got in frame 2 so far:
(in Frame 2 of the timeline)
Code:
stop();
import flash.display.DisplayObject;
import flash.display.Graphics;
import flash.display.Shape;
[code]....
Ive got this much working, but I dont understand how to convert the output of this function to a symbol usable in another frame..
I have an image on my frame. (a circle). I need this circle to blink on the screen based on user's input. The circle display time and the hide time should be input in a input text box in the beginning. Also this has to blink for "x" number of user defined cycles. I know how to control the delay between blinks but I cannot control the amount of time the circle stays on screen.
View 4 RepliesI am new to flash, trying to do some animation character. I have 2 queries
1. What is lock fill; whenever I am trying to fill a color, it shows lock fill....
2. If I am creating a non regular figure like say with pencil, if I draw some part of it & do other part by later; these will be assumed different objects & I am not able to fill the whole figure with a selected color.
I'm developing a game atm, and I need some help on the mathematics/coding of colliding circles (and their change in x/y speed). What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision
If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled. Does anyone here have any insight, links or tips on how I can du this?
i want to make one circle follow the mouse cursor, inside another circle. Similar to an eye looking at the cursor. Ive attached an example.
View 4 RepliesI have text in a dynamic field showing up as circle. I want to say if circle shows up change it to cercle (french).
[Code]...
What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision.If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled.
View 6 RepliesI want to create circle, and put 8 points on it. So, user can drag each point in order to change it's shape.
Is there any way to do this in flash?
I have some following code:
Ref. - How to draw a continuous curved line from 3 given points at a time
package{import flash.display.Sprite;
import flash.events.MouseEvent;
import flash.geom.Point;
[Code].....
So, can anyone convert these three point curve line to 8 points circle?
I have to draw a circle using action script. The Circle Diameter has to be controlled by a button.
View 0 RepliesTrying to do circle circle collisions via math which I'm really having trouble with. One circle (player) just moves from keyboard. The ball reacts to the player. All the code shown is in my players class and I passed in a reference to the ball.
On my enterframe I have:
Code:
var xmov1 = xSpeed;
var ymov1 = ySpeed;
var xmov2 = ballRef.xSpeed;
var ymov2 = ballRef.ySpeed;
[code]....
Perhaps I'll go with a box2d equivalent instead of trying out my own physics shenanigans.
Here I what i need is : Start drawing first circle and when first circle is on half way, Start second circle.same way second and third circles. and after completing 3 circles, just gotoAndPlay 2nd Frame .
View 3 RepliesI have a simple three ring animation where the three rings fade in and out.On the stage the rings are a perfect circle, in the publish preview they look fine, but once I publish the SWF, all of the sudden the rings are not perfectly round anymore.
They are almost perfect but right at the top and bottom there is just a small portion which has sort of "flattened out"...
I bought a Flash video tutorial online for Animating and the FIRST step is to create a circle with the circle tool, and the guy does it online, and it fills itself in. I repeat his actions exactly and I cannot get the same result at all. I just get a circle.
View 5 RepliesI have two MC's, circular in shape. One of the circles is stationary and you can drag the other. I'm trying to get the moveable circle to be able to move around the circumference of the stationary circle, but not overlap. I'm able to detect when they overlap, not using hittest. I just can't figure out how to code it so that the draggable circle can't be moved over the stationary circle.
View 4 RepliesDoes anyone know of any tutorial or code example that deals with resolving circle-circle collisions including rotation?
View 2 RepliesI have been trying to get this right for hours now it cant be as hard as I am finding it! but basically I have a circle and in that circle is a circle and all I want is for the inner circle to not be able to leave its parent. that's it but I just cant get it to work.
View 1 RepliesI have a scratch card. Basically I'm masking a movie clip with an empty shape. I can draw on that mask and thus my movieclip will become visible. I have also attached the fla.
Now what I would like to achieve is that when you fill a percentage of that mask, let's say 70%, I automatically fill the whole layer so that all of my movieclip becomes visible (as mask is fully filled).
I'd like to make a circle slide ( Slider that on the shape of circle instead of vertical and horizontal Slider) like this one:
[URL]
Is there a ready Component on the web.
1. I selected the Rectangle tool, and made sure Object Drawing Mode was not selected.
2. I picked colors for stroke and fill, and drew a rectangle.
3. I clicked the Selection tool, then dragged around the rectangle to select all of it.
4. In the Property Inspector I clicked the fill color icon. I clicked the square with the slash, to designate no fill. The fill disappears.
Everything has worked so far. But now I decide I want a fill color after all. I select the shape again. But clicking the fill color icon in the Property Inspector and the Tool panel has no effect on bringing a fill color back to the shape. I can't figure out how to do that.
Actually, I could restore the original fill color using Undo, or the History Panel. But it seems there must be a way using the Property Inspector.
my friend make me doing a map (in ActionScript). After the click on the some place in the map starts the redirect, e.g.
Code:
on (release) {
getURL("http://www.yahoo.com/"_blank);
}
I'm not a flash developer, but I would be to want add the every part of the map a identificator, e.g. id="part1"
PS: I have now the map, where every part have some ID. After the click on that ID I call jQuery event 'click' -- and this I need also in the new flash map.. Is it?
Is it possible to make something like the "Bone tool" does in older Flash CS3?I mean make all limbs for a character and connect them together in the joints, so if I drag the hand, the rest of the arm follows in a natural way. So I can easly make motion tween animations.
View 3 Replies