I am trying to make a timer and I want a circle that is always shown.It starts out green.As time progress' a growing red pie slice begins to occupy more and more of the circle until the entire circle is red.The restrictions are that I can't use sprite, so it would have to be done with UIComponent or some other format. Additionally, I can't use degrafa. The SDK I am using does not support these methodsMy only hold back is that the SDK I am using does not support rotation, but I think I can make this all work.For others that can't use sprite, just substitute UIComponent where sprite is.I am pretty sure rotate is the only way, but is it possible to make it start at the 12 o'clock position without rotate?
I am trying to animate a circle from a position to another, but the speed is like "easeIn" twining animation. The moving speed start high and ending a smooth slow animation like easing. I know It can be done thru easing. but its not helping to my animation which i am doing currently. So pls someone help to do this by "EnterFrame" event.
Circle starting position : 10 px Cricle Ending position : 500 px Starting Speed : 20px /per sec Ending Speed : 1 px / per sec
So what will be the speed in middle of somewhere ?
I am struggling to find a way to animate a fill of text in Flash CS4. The concept I am looking for is that over a time period have the color rise from the bottom to the top. My initial attempt was to have 2 objects, one filled with the color and the other filled with white. I was hoping to just adjust the borders of the object or text to have it disappear, but that just reshapes the object, not cropping it. If you know how to crop into objects and reveal the object beneath, let me know.
I am very new to Flash so hopefully it is a simple answer, but I am not seeing it yet.
I am trying to dynamically draw a circle and fill it up with some color. Drawing a circle is pretty easy job for me, but fill it up with some color seems not happening today.
PHP Code: Circle function starts function fnDrawArc(mc,x,y,r,angle){ mc.beginFill(0xFF0000); // this is not working.... mc.moveTo(x+r,y); for(i=1;i<=angle;i++){ [Code] .....
I have a graphic symbol of a circle that has a radial gradient fill of yellow to red. All I want to do is have it change from yellow to red to red to yellow. I tried the advanced color settings but that doesnt quite do what I want. With the color settings.. it changes the complete tint of the object. I want it to look like it is tweening the gradient not the object. So if the object had a yellow center with a red outer edge I want it to chenge to a red center with a yellow outer edge. How do I accomplish this?
i'm trying to build a circle using lines. each line starts in the centre of the circle and is as long as the circle's radius. using a loop along with sine and cosign waves, i can build the circle using the sine and cosign to mark the coordinates of the lineTo parameter.
my problem is with the line thickness parameter of lineStyle. i would like the ends of the lines to match up perfectly, no matter how big the circumference of the circle, but i can't figure out a proper method for the line thickness.
//this is what makes sense to me, but it still creates some gaps lineThickness = 1 + (((nRadius * 2) * Math.PI) - 360) / 359; for(var i:int = 0; i < 360; i++)
[code]....
to make the ends of the lines meet up at the circles circumference, without any gaps, i need to widen the lines to fill in the space that's remaining. what makes sense to me, but doesn't work, is to subtract the 360 from the circumference, then divide that number by the amount of empty slots between the lines (which is 359) and adding that number the the thickness of 1.
what's concerning me is that the lineStyle thickness parameter is a Number, but seems to take only values between 0 and 255, so i'm not sure if a floating point number like 1.354 is a valid thickness.
I am new to flash, trying to do some animation character. I have 2 queries
1. What is lock fill; whenever I am trying to fill a color, it shows lock fill....
2. If I am creating a non regular figure like say with pencil, if I draw some part of it & do other part by later; these will be assumed different objects & I am not able to fill the whole figure with a selected color.
I'm developing a game atm, and I need some help on the mathematics/coding of colliding circles (and their change in x/y speed). What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision
If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled. Does anyone here have any insight, links or tips on how I can du this?
What i need to know is how to calculate the direction and speed a circle has after colliding with a static (non-moving) circle. I know how to detect a collision between the two, but I'm not sure about the maths I need to give the circle the right speed and direction after the collision.If i do know how far away the two circle-points (in the middle of each) are to each other (in both x and y coords) would it be easy for me to find the new speed and direction of the large circle in the example above? I know that I somehow should use the angles to pretend the circle hits a flat "wall" (as it only hits one point), and then calculate the new speed/direction. My only problem is that I'm not sure how to decide the angle of this flat "wall" and how x and y speeds should change when colliding with a wall that is angled.
I`m working on a app that you can draw lines.....like circles, rectangles... my problem is when a user draw a circle for example....i wanna be able to paint (change color) inside of this circle. I`ve tried working on Shapes with cacheAsBitmap = true and Bitmaps with BitmapData but it doesn`t seens to work.
Trying to do circle circle collisions via math which I'm really having trouble with. One circle (player) just moves from keyboard. The ball reacts to the player. All the code shown is in my players class and I passed in a reference to the ball.
On my enterframe I have:
Code: var xmov1 = xSpeed; var ymov1 = ySpeed; var xmov2 = ballRef.xSpeed; var ymov2 = ballRef.ySpeed;
[code]....
Perhaps I'll go with a box2d equivalent instead of trying out my own physics shenanigans.
Here I what i need is : Start drawing first circle and when first circle is on half way, Start second circle.same way second and third circles. and after completing 3 circles, just gotoAndPlay 2nd Frame .
I have a simple three ring animation where the three rings fade in and out.On the stage the rings are a perfect circle, in the publish preview they look fine, but once I publish the SWF, all of the sudden the rings are not perfectly round anymore.
They are almost perfect but right at the top and bottom there is just a small portion which has sort of "flattened out"...
I bought a Flash video tutorial online for Animating and the FIRST step is to create a circle with the circle tool, and the guy does it online, and it fills itself in. I repeat his actions exactly and I cannot get the same result at all. I just get a circle.
I have two MC's, circular in shape. One of the circles is stationary and you can drag the other. I'm trying to get the moveable circle to be able to move around the circumference of the stationary circle, but not overlap. I'm able to detect when they overlap, not using hittest. I just can't figure out how to code it so that the draggable circle can't be moved over the stationary circle.
I have been trying to get this right for hours now it cant be as hard as I am finding it! but basically I have a circle and in that circle is a circle and all I want is for the inner circle to not be able to leave its parent. that's it but I just cant get it to work.
I have a scratch card. Basically I'm masking a movie clip with an empty shape. I can draw on that mask and thus my movieclip will become visible. I have also attached the fla.
Now what I would like to achieve is that when you fill a percentage of that mask, let's say 70%, I automatically fill the whole layer so that all of my movieclip becomes visible (as mask is fully filled).
1. I selected the Rectangle tool, and made sure Object Drawing Mode was not selected.
2. I picked colors for stroke and fill, and drew a rectangle.
3. I clicked the Selection tool, then dragged around the rectangle to select all of it.
4. In the Property Inspector I clicked the fill color icon. I clicked the square with the slash, to designate no fill. The fill disappears.
Everything has worked so far. But now I decide I want a fill color after all. I select the shape again. But clicking the fill color icon in the Property Inspector and the Tool panel has no effect on bringing a fill color back to the shape. I can't figure out how to do that.
Actually, I could restore the original fill color using Undo, or the History Panel. But it seems there must be a way using the Property Inspector.
I have a main SWF that loads an external SWF with addChild. the external SWF loads fine but when i click the combobox in the external SWF I get 2 errors:
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller. at flash.display::DisplayObjectContainer/removeChild() at fl.controls::ComboBox/close()
There are 2 buttons to animate the movieclip on moving right or left and making it appearing and disappearing. However, the button react after a few second the animation finish. Does anyone know how to make the button work faster? this is the script for those buttons
one of the button on (press) { if (tt == false) { import mx.transitions.Tween;
i'm trying to animate the drawing of a picture with my wacom tablet, but the only way that i know how is to start with the full drawing and erase frame-by-frame backwards, which takes a lot of time and can look choppy.
