In the guidelines I noticed the following requirement:
give unit the ability to detect browser edges, and to expand in the opposite direction if expanded portion will disappear off browser window.
I am trying to create an image pan that's move this image oposite to the mouse position with a tween effect.
There are lots of posts and tutos but I can't make it runs with as3.
I need to have a movie/image to go in the opposite direction to the mouse.For example, I want the image to go down if the the mouse goes up.Similarly for all other directions.
I want to have a subtle deceleration of the image.I also want to have a border for the image.The mouse should only move when the image is in the boundary.I want to have a mask, so that only the part of the image in the boundary can be seen.
Does anyone know the algorithm used in this image panner [URL]
How to move the image in the opposite direction of mouse.
I am about to make a gallery where all the pictures are ligned up, in a vertical row collum.I wan to make the Movieclip move in the opposite direction of my mouse movement
View 2 Repliesway programmically in flash to detect the edges of imported artwork (artwork that has transparent background)? I am hoping to build something that detects the edges (or boundaries) of artwork and then place other objects around those boundaries. (so they dont touch too much or overlap).
View 4 RepliesI have been trying to figure out a good strategy to perform a bitmap crop using Actionscript3. For example: I have a picture of a car and I want to crop out the car from the image alone and feather the edges so that they do not look jagged.
I am a flash noob and have only been using it for a couple of weeks. I've tried a couple of options and here is the last one that I have come up with it: I place red dots on stage that are draggable so that you can outline the object you want to crop and the dots are the bounds for a gradientFill that is used as the bitmap's mask. (I am using a radial gradient ... so the results are far from what I want, since the car is not an oval).
[Code]...
1) How can I fade just the edges of this custom-shaped fill outlined by the red dots?
2) I want to save the image out to a file once it's cropped. What strategy would be better for doing this using a BitmapFill or a GradientFill as a Mask (If it's possible with both)?
3) I may be using this strategy to crop faces later on.. anyone know of any good face detection APIs for as3? (also edge detection APIs)
I want to know how if a movieclip is going += ._y or -=._y
View 1 RepliesRecently a client of mine decides he wanted rounded edges for his page vs. the typical square edges. This was after the initial design and at the point where it is almost complete.I told the client that in order to do this we would have to go to a full Flash web page meaning a full browser Flash page (everything is already flash).Now I told him that we could do this but because it was a new design and as you know that there is much involved in doing something like this i.e. all the paths will have to be changed because it will have to reside inside a mc etc.if there is an actual way to make the stage rounded only for future knowledge.I know I can make a round edge square or rectangle but it still has square edges at outer edge of the stage.
View 5 RepliesI wanna detect the direction of mouse movement. If the mouse moves tpwards the left or right of its currrent position, i want to detect it. Is there anyway to identify such movement. Actually i am implementing a 360 degree rotation of image. That means , if the mouse moves along the left side of its current position, then the image should move along its left side, otherwise it should move along the right side. For example, view this site: [URL]
View 4 RepliesI'm building a simple 360 degree image rotation effect using single frames and forward and back buttons. I'm new to AS3 and have managed to create functioning buttons... (so my code may be a bit odd!)But now I also want to advance frames by clicking and dragging on the image itself (or on an invisible button sat on top of the image).Although there are some threads here which have asked the same thing, I don't understand how they were answered. My code is below, and the file I am practising with is on:URL...At the moment if you click on the image area it will advance but as there is no code detecting mouse direction, it just goes forward. Can anyone help me understand how to implement a simple direction detection and then use this to decided whether to advance or go backwards.[code]
View 16 Repliesi have been using AS2.0 for quite a long time. And i started using papervision3D too.I am using tutorial made by Lee Brimelow's cube tutorial. but i want different results. So long i am able to move the cube in one direction and that is my requirement. But in his tutorial he as link to urls. what i want is to expand one face of the cube which is clicked to expand to fit in the screen.(i am also using fullscreen and stage resize).
View 1 RepliesI'm attaching an swf to show what I'm talking about. But essentially, I have a full browser flash set up, with an animation running in the background. I would like there to be a horizontal navigation bar at the bottom that is always at the same spot on the bottom. I would like the width of the bar to always stretch to cover the entire bottom of the browser window. Right now everything is peachy except for getting the nav bar to stretch across. When I do a menu.scaleX = 100; The little text block I have on the left seems to scale off the screen somewhere and it is no longer visible.[code]...
View 3 Repliesusing trig, when moving an object based on its current rotation, how does one "detect" if the object is currently moving to its own left or right direction? example: right side up: left moves the car to its left, which is left. upside down(180 rotation): left moves it the car to its left, which is right. based on movement alone, how can i say its moving to its own oriented left or its right?
[Code]....
i've made a flash movie in res 600 * 300, now i want to keep this res don't want the user to be able to expand the browser window or change the res or anything how do i do this?
View 9 Repliesi have a scroller developed in as2. it basically scrolls continuously in a direction until the direction of the mouse is changed. the images of course loop in the continuous scroll. now the problem is that for 10-15 photos its ok. but when i feed it with 180 photos, it seems to show only 11. why would this be? any restriction on flash ??
View 1 RepliesI'd like to know how to get AS3 to detect if it is running in the IDE or in a browser. That way I can disable certain functionality and trace it out instead while testing.
View 5 RepliesThis my HTML but if the browser does not support flash then i want to replace image in flash part
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
[Code]....
I just have two version of my site
one is design for Flash supported (like Desktop) and the other one is for Mobile devices
I just want to know if I can detect and if is true (support) they will stay the same website assuming is[url]...
how i can detect what the browser is in flash??? if its netscape i want to set a variable if its IE want to pass set another variable
View 2 RepliesDoes this sound at all possible (doesn't to me):Flash site is open...
1. User goes to their browser's options and chooses PRINT.
2. Flash (or Javascript) detects that and tells Flash.
3. Flash then responds by modifying what it's displaying before printing begins
i use a simple embed swf movie in one of many pages i own, but recently I build a new page in html5. But i tested in Internet Explorer and doesnt work well. What i need its a script code in AS3 to use in my swf movie that detect the browser and if the browser its IE9 load an old page, but if its other browser is like mozilla or chrome, load the new page in html5.
[Code]...
I need to detect browser/tab closure from within a flex application in order to delete the session information in the server. I'm familiar with JavaScript events but I was wandering if there is an event in flex for application unload or something of that sort ...
View 4 RepliesUsing Adobe AIR + related technologies, is it possible to detect the URL of the active tab/window of the active browser?
For instance, if my user is surfing in IE8 on [URL]... can I retrieve that data for use in my Adobe AIR RIA?
I have an AS3 application that loads various SWFs at runtime. The loading animation that is being used has a fairly long in and out animation that I don't want to show if the target SWF is in the browser cache.So at the moment each SWF is loaded in as required using Greensock's SWFLoader in a basic manner:
var context:LoaderContext = new LoaderContext();
context.applicationDomain = ApplicationDomain.currentDomain;
loader = new SWFLoader("mySWF.swf",
[code]......
There is a way to detect the browser version in the html file?I wanna do something like this:
if language == us
load us.swf
else if language == jp
load jp.swf
I'm mostly an art/design oriented person but am trying to learn some new things. I'm currently working on a test site for myself as a self-learning piece that will be a CSS laid out site with some Flash elements. Anyway, I'm completely stuck on this current problem..I will be placing a SWF file that will live on each page but will need to do different things based on which page the browser currently is on. It's nothing complex...will probably be something as simple as "on enter frame, if the browser is on this page 'http:www...', then jump to frame '#' ". This is how I'm placing the SWF file through the CSS.[code]
I read that "FlashVars" was the start of how to do this but as you can see in that last line, that's as far as I got on the CSS side. I have ZERO clue how to make the SWF file detect that value or detect the page the browser is on and then do something with AS3. Does this all make sense? I've searched through books and online for a little over 6 hours today and have not been able to figure this part out. Is it a simple line of code I need in the flash file or am I embarking on more than I can handle at this stage?
have a ball with the name of mc which can be moved using the keyboard .. when you press the left mouse button shoots the ball, this ball and the other flies in the face where the cursor was in the shot .. but if you move the cursor to another location and shoot a second time then the second ball is also flying in the direction of the cursor and the first ball change direction toward a second shot ..
ActionScript Code:
import flash.display.MovieClip;
import flash.display.DisplayObject;
import flash.events.MouseEvent;
[Code]....
how to make that first ball did not change its direction and continued to fly in the direction of the shot?
My client has a website that plays YouTube videos. Once a video is finished playing, it will automatically play the next one. This is done by using the YouTube API and swfobject.After some research, I was told that Safari on iPhone does not support flash. This make the current swfobject code not working on the iPhone browser.As workaround, when the user clicked on an embedded player, iPhone will launch the YouTube app.
View 2 RepliesI want to know the type and version the browser that the user is running from within my Flex 4 application. I know I can get that information by using ExternalInterface to call Javascript. I know I can get that information from the server. I'm looking for a way to get that information directly from actionscript. I mean, isn't there a global variable or something that keeps this information?
View 1 Replies
