ActionScript 2.0 :: Display The Sum Of All The Green Boxes - Summing Numbers
Sep 10, 2009
I'm working on a flash thing that just has three boxes, each with a different # in it. By clicking the box it will turn red or green, and below it will display the sum of all the green boxes. This is really just a test kind of for a bigger project that I have to do for work. Basically it all works except for the summing part, which I believe has something to do with the fact that it is in a function, but I could be way off.
[Code]....
View 1 Replies
Similar Posts:
Nov 22, 2009
I have a few textAreas (input fields) in a form.When I click on the Tab key, the focus shifts to the textArea. And along with this, a green outline comes around the textArea... How can I avoid the textArea outline color? I guess there must be a piece of AS out there which would help, it's just I did not find it and Official Docs won't say much about it.it does not happen so if compiled the movie under AS 1.0. It only has this behaviour when published with AS 2.0 (and perhaps AS 3.0 donno).
View 8 Replies
Feb 17, 2009
I have 4 text boxes on a frame. My goal is to have them put numbers in the text boxes. I need to be able to show whether or not what they put in was correct. I have 4 input boxes and 4 dynamic boxes set up. I figured I could put code that says, "if >1 then "incorrect" shows up....if =1 then 'correct" shows up...that type of deal...Ultimately after I show whether or not they're correct...to go to the next frame/frame name...
View 3 Replies
Jan 3, 2010
All the coding for the program I am creating is shown below.
[Code]....
I have created two text boxes, one for height and one for width for lines that are going to be drawn by the user on the stage. at the moment the text box information has no connection with the makeShapes function in the code. The height and width of the lines at the moment are at a default of 10. What I need to do is replace the defaults with a connection with the information of the 2 text boxes.
View 4 Replies
Jan 28, 2011
I'm stumped on this problem and can't seem to figure it out. Any suggestions would be welcomed. Basically I'm building a large calculator that adds over 100 input boxes. I've got it working except for the fact that if a user misses inputing a number into one of the input boxes it does not work anymore. I've tired lots of things to no avail. I just want to add the input boxes and skip those where the user did not enter any information (does not apply to them)
Here is my code.
on (press){
ReceptionTotal = Number(LocationFee) + Number(Caterer) + Number(ToastingGlasses) + Number(SecurityFee) + Number(BarPackage) + Number(WeddingCake) + Number(FoodHors) + Number(Baker) + Number(BartentingFee) + Number(CakeKnife) + Number(Servers) + Number(Flatware) + Number(Dinnerwear) + Number(Flatware) + Number(TableLinens) + Number(ChairsCovers) + Number(Glasswear) + Number(Tent) + Number(Napkins) + Number(Childcare) + Number(DanceFloor) + Number(ServingStaff) + Number(Lanterns) + Number(Heaters) + Number(Restrooms);
}
each input box has a variable name assigned to it as indicated above. I've tired setting the variables to 0, tried if statements don't know how to skip one of the above variables when no number is entered.
View 8 Replies
Jan 20, 2004
how do you shuffle random numbers?lets say i hav 5 dynamic text boxes.. and i want to shuffle numbers 1 through 5 in each of them on a click of a button... how would i do that??
View 14 Replies
Jan 20, 2004
how do you shuffle random numbers?lets say i hav 5 dynamic text boxes.. and i want to shuffle numbers 1 through 5 in each of them on a click of a button..
View 14 Replies
Mar 21, 2008
I need a radiobutton to output two numbers in to two different text boxes.Like, if I would to select a sofa(radiobutton_1),it would give me the cost and yardage needed for the fabric. then I would pic an ottoman(radiobutton_2), and it would add the two.right now Im using the data(in parameters) from the button itself to get one number(cost):[code]
View 3 Replies
Nov 30, 2010
I have two questions the first being how could i restrict a text input area to allow it only to recieve entries 1 - 49 I have tried
I1.restrict = "0-9";I1.maxChars = 2;
The second being how could i restrict the inputfields to not allow duplicate numbers?
There are 6 of them as follows:
[Code]...
View 1 Replies
May 21, 2009
I made all the corrections in my code and got a working one. But what I really want to do is not adding texts into one text field. I need to get the numbers which is written by users into text boxes and then use their inputs to make some calculations. (Like 3+6=9 ). When I assign numbers to variables Ican easily make calculations but what I really want is not that. the numbers should be entered by these text boxes. I think need to change "string" to "number" but when I do this I get error message. I am planning to use the calculation result in some other part of my code. I am wondering if using "return" function useful for me to get the number (the result) of calculation?
[Code]...
View 5 Replies
Jun 27, 2011
How do I sum up the values for my array? Here's the output if I trace my array (I couldn't find the actionscript equivalent of PHP's print_r function):
[Code]...
View 3 Replies
Aug 5, 2010
I have a dynamic text field being populated by an external .txt file:
myData = new LoadVars();
myData.onLoad = function()
{
[code].....
View 7 Replies
Mar 30, 2011
i want to import data from mysql into flash. its a simple highscore table. at the moment i have php to write out the scores in xml like this:
HTML Code:
<scores><score Myname="chris">35</score><score Myname="bob">36</score><score Myname="sam">36</score><score Myname="adam">36</score></scores>
then in flash i have a MC named 'scoreTable' and in there are dynamic text boxes named 'score', 'score1', 'name', 'name1'...etc...
and the AS3 code i have is:
ActionScript Code:
//***************** This sets up the variables *********
var xmlLoader:URLLoader = new URLLoader();
var xmlData:XML = new XML();
[Code].....
View 1 Replies
Jan 6, 2009
I need a basic example containing 3 or 5 check-boxes and should display the names of check-boxes which are selected in a text-box.
View 1 Replies
Apr 30, 2003
I want to be able to add the sum of 3 input text boxes and have the total be displayed in another text box. figure I set a variable and do something along the lines of: Number = "_root.input1 + _root.input2 + _root.input3";Or do I have to do this another way?Also where should I put the code? In a button? Or can I stick it in the frame to save complications of users clicking on a button.
View 5 Replies
Nov 10, 2009
Is it possible to make dynamic text boxes display only full words from an xml feed? At the moment I have a selection of feeds that are supposed to run into each other, but if some of the text is longer than expected I get the first one or two characters of a word tagged on at the end. Is it possible to have the flash read whether it has character space left to display the next word in the xml?
I know it doesn't really recognise spaces etc and just pulls in the info within the node, but maybe there's a work-around if you want to do what I'm trying?
View 1 Replies
Mar 16, 2010
I have a main movie that contains some combo boxes. Some of them may be disabled.By pressing a button I load another movie using loadMovie. The loaded movie also contains combo boxes.When the button is pressed, the clip that shows the combo boxes is removed from the stage and the loaded movie is displayed. By pressing another button, the loaded movie is unloaded and the clip with the combo boxes is displayed again.Well, once the other movie has been loaded, when I go back to the clip with combo boxes, the disabled combo boxes have a small gray button covering the black down arrow.I have determined that so long as the loaded movie contains combo box in the library, the problem occurrs, even if there is no actual instance of it.The combo boxes that are not disabled are not affected. The combo boxes are disabled by setting "cb_name.enabled=false".If the combo box is enabled, it displays correctly, but if disabled again, it goes wrong again.My project is targeting Flash 8, so it uses AS2.I'm using Flash CS4.
View 5 Replies
Apr 15, 2009
I have a text field that displays a number from a variable. How can I make it so this number is always formatted to 2 decimal places?
For example, 1 would be changed to 1.00 and 1.5 would be 1.50, etc.
View 1 Replies
Mar 15, 2011
My question is how to make 2 input text fileds(numbers) and one dynamic text field which will display result of sum of that 2 input textfields(numbers)?"FirstInputTextField+SecondInputTextField = display Sum in dynamic text field"
View 6 Replies
Feb 5, 2009
I have drawn a textfield (instance name - my_Text) onto the stage. In my actions I have a variable (called 'myFrame') which is an 'int' and the value is a number drawn from an xml feed. Now when I trace the variable 'trace(myFrame)' the correct number displays into the output window. However, when I try to display this variable, using 'myText.text = myFrame', an error occurs. How do I display this integer into a textfield?
View 2 Replies
Sep 9, 2010
I have a textfield (the one that shows ammo) that doesent display all numbers. U have uploaded the swf. The code that I used to make the textfiled display some text is:
ActionScript Code:
function checkAmmo(e:Event){
var percentAmmo:Number = curAmmoInClipFirst/clipSizeWep1*100;
if (curAmmoInClipFirst >= 0){
trace(curAmmoInClipFirst);
ammoLeftBar.bar.scaleY = percentAmmo/100
} else {
Char.reloadGun();
} ammoLeftBar.ammoLeftNumber.text = curAmmoInClipFirst.toString() + " / " + clipSizeWep1.toString();
}}}
Which is triggered onEnterFrame.
View 3 Replies
Mar 12, 2009
I am working on a maths game which involves generating some large numbers in AS3. When I pass these numbers into a textbox they appear as e.g. 300000, I would like them to appear as 300,000.Is it possible to format a text box to do this?
View 1 Replies
Oct 13, 2010
I am trying to take and XML string and then display the numbers individually. Below is my Actionscript followed by my XML.
import fl.controls.*;
var digit01_xml:XML;
var xmlReq:URLRequest = new URLRequest("testRBS.xml");
var xmlLoader:URLLoader = new URLLoader();
function xmlLoaded(event:Event):void{
[Code] .....
View 9 Replies
Mar 16, 2012
Limit amount of numbers in display?
View 9 Replies
Mar 17, 2009
I want to use a dynamic text field to display the numbers, but have a few buttons that go with them.I want to be able to press the button, and a set time is generated in the dynamic txt field, i.e. 10 minutes, 15 minutes & 30 minutes. the user will press 30 minutes, then start, then the countdown will commence, and same for the other time increments.
View 1 Replies
Aug 31, 2002
How do I make it so that my timer does not display the decimal places when it increments by .10? I only want to see whole numbers...
View 6 Replies
Jul 18, 2010
I just need to display Numbers as well as in Words also in the Text field.
For example
99999 - NINETY NINE THOUSAND NINE HUNDRED AND NINETY NINE
for this i plan to use Array
like seperate the given numbers to array ([9][9][9][9][9])
then convert these number in words
View 1 Replies
Mar 16, 2012
im making a flash calculator and ive nearly finished ive got one last thing i need to do and thats limit the amount of numbers i can enter to 10
[Code]...
View 9 Replies
Sep 16, 2011
Here is my code to create a string like this:1-xxxxxxxxxx (where x is a random number)I'd like to display this number on subsequent frames using the same dynamic test field (feedback_txt).How would I create a variable which would hold the random number? How would I display the code on the subsequent frame so the string would display?
var myNum1:Number = Math.round(Math.random()*9);
var myNum2:Number = Math.round(Math.random()*9);
var myNum3:Number = Math.round(Math.random()*9);
[code].....
View 2 Replies
Apr 2, 2004
I have recently had the idea to create a lottery draw, the code below will create 7 randomly selected numbers and place these in the output window.My problem is how to use the 7 random numbers to display the corresponding lottoball on the stage.Should I create a movie for each lootoball or place all the lottoballs in 1 movie on seperate frames and have code goto each frame?
pickfrom = new Array();
winlist = new Array();
all = 49;//49 lottoballs the choose from[code].....
View 14 Replies
