ok im having some trouble importing video files.files such as "windows media audio/video" file , import fine but everything else, it just imports the last like 9 frames.
ive only had this problem after i switched to my new computer, which is WINDOWS XP, and before it was WINDOWS 98. not sure if that has to do with it.
As titled, what is the way to record video/audio files using Flash Meida Server through rmtp, and allow users to access the recorded files through http?What I am trying to do, is to record a user's microphone's input and save it to the server.fterwards, I would like other users to be able to access the recorded files and mainuplating the audio data, by computeSpectrum(), to do some visualization of the audio. As I know computeSpectrum() cannot work on streaming files, so I think I need to access the recorded files using http instead of rmtp. Is that true?
View 1 RepliesI'm using ffmpeg on Windows to create mp4 files for web distribution. As libfaac isn't available, I use libmp3lame to encode the audio tracks. The mp4 are played back with a falsh player (JWPlayer).I was wondering if there were any shortcomings to use mp3 instead of aac on certain devices?
View 1 RepliesI ran a simple live video streaming application for the first time with actual users and ran into a couple of serious performance issues that had not turned up during testing. In this instance there was one video stream from a live web cam and used FMLE at 150 kbps using VP6 and MP3 @22k. There were 16 clients and everything worked pretty good for about 30 minutes. (although some clients said their audio and video were out of sync by up to 3 seconds)
Then individual clients would have either the video freeze or the video would continue and the audio would stop. These clints had to "disconnect" and then "connect" again to the application. This happened to all of the clients at one time or another for several minutes. I stopped and restarted the FMLE with progessively lower bandwidth settings down to 75 kbps but still clients were having the same issue.
I eventually stopped the FMLE and used the applications built in publisher at 45 kbps and that seemed to eliminate the freeze/dropping issue. But of course the video quality was very poor and some clients still reported that the audio was out of sync with the video. The server hosting the FMS application is a quad processor dell with lots of memory and network connectivity. The Flash Media Admin Console performance graph showed the total Bandwidth as 3 Mbps at maximum.
I am developing Video Chat over Ip (including audio and text too). But I am unable to get the proper startup material for my desktop application.
View 2 RepliesI'm trying to make a software which sends video and audio data to a flash media server by using RTMP protocol. Currently, my program can communicate with a flash media server correctly. RTMP specifications does not describe about the raw data in video/audio messages, so I muxed raw H.264 and AAC data into video/audio messages and sent to the server. The server seems to accept them, but a video player cannot playback the stream sending from the server. The player just says "Loading..." For a test purpose, I sniffed the network packets between Wirecast and the flash media server and ripped off only video and audio data. Then, I muxed those data into video/audio message and sent to the flash media server. In this case, the video player connected to the server can playback the stream correctly.
I checked the stream sent from Wirecast, the stream seems not to be H.264 raw data because those data are not started from 0x17 instead of H.264 start code. With those situation, I am wondering what kind of container format I should use for H.264/AAC data to the flash media server.
I am running Media Server 3.5.2. The server is still non production. I copy video files to webroot/vod/video.flv. From the client workstation I attempt to access [URL] and get nothing. It was my understanding video's copied here could be viewed as such.
View 5 RepliesI'm using flex 3. I've successfully played video and audio files by using following libraries:
flash.media.Video flash.media.Sound Live docs link. But the limitations are as follow: Video class can be used to play only flv file format. To play mp3 files I must use audio file.
So can I play most of the famous audio/video files by using single method?
Well by checking the file type we can some how achieve it. Then I should create a component for that.
So can any one suggest me such ready-made components? or is there any other alternatives to play audio/video files?
currently I use the following workflow for Live video streaming.I have FMLE on a computer streaming the Video feed to my FMS.I currenlty use Dreamweaver to create window with a few instances of a video window and one of the windows is configured to rtmp to my server and the stream name of the stream I have setup in FMLE.This then streams to one of the windows.I then assign a different Stream name to the other windows.
I send an FMLE client to a user in the locations that want to have a video presence on the webpage.I send them instructions and running FMLE and the parameters to use to get their camera up and running.This works fine to a point.Most of the users are not technically minded and so often this leads to issues and delays to get these things to work.
I want to move on and improve this flow.I want to create the video instances on the page where:Below each video window is a text input field where a user can type in their name which will be used as the stream name.Below each video window is a button that the user clicks to connect their camera automatically without having to install FMLE.Once the video feed is running, only that user can click the button again to disconnect it. ( The button changes to "Stop Broadcast" etc).
I have looked at the structure of Ustream for example, and this seems to be the method they use as you can download the XML file of your channe,l and the RTMP URL and stream name can be copied and then used directly in FMLE and you can stream with more control of your camera that way.
I want to set the bit rate of audio and video (48,96.128 kbps) at the time of live streaming . i m not using the flash media live encoder because i have to make it as web applicaton. can any one tell me how to set bit rate.
View 1 RepliesAnyone know of a skinnable audio player (or something similar to Windows Vista audio control in task bar) that i can embed in my website?
A player that can be customized to use a 'speaker' icon instead of a 'play' icon. When the speaker is clicked, the volume can be adjusted or turned off. The option of being able to autoplay and set the default volume level.
We use a Flash component to allow a user on our web site to record from a Webcam on to our own Flash Media Server. The problem we are having is that the video in a 30 second FLV freezes at the 7th second but the audio continues. The video unfreezes after a couple of seconds but never catches up with the audio. At the very end there's a "Fast-forwarding" of video for the last few seconds so that at literally the last moment, everything's in sync. This happens for almost all of our recordings. Has anyone experienced this type of behavior?
View 5 RepliesWe have the Flash Media Interactive Serve 3.5. Is there an automated way to strip the audio from video files and stream on FMIS? .
View 2 RepliesI have been running FMIS 3.5 since April of this year. In August, we started recording conferences, but I'm not sure that this is the issue. We are under very low load at the moment. We never have more than one conference going simultaneously. Our server is spec'ed with a 64-bit operating system (MS08), 24GB RAM, and 24 processors.I notice that in some of our conferences, the video and audio freezes for 5 to 10 seconds. Then they recover and resume where they left off. When this occurs, it recurs every one or two minutes, which is very disruptive.People have to constantly repeat themselves.
FMIS is configured with defaults out of the box, with the exception that we are recording live video and audio. How do I solve a problem like this? Is it Internet latency? Is it our internal network? Is it FMIS 3.5? Not sure where to start.Now I've inherited much of the Flex 3 code that is used in the stream and player Flash components. I notice in the player component that the original programmer is using a timer to monitor the mx.Event.VideoEvent.STATE_CHANGED event. As long as the event fires, he resets the timer. But if 10 seconds expires and the STATE_CHANGED event has not fired, he restarts the player. Is this a valid methodology? Here is the code fragment.
<mx:Script><![CDATA[var lastUpdate : Number = 0;private var pulse : Timer = null;
private function onInit() : void {
viewVideo.addEventListener(VideoEvent.STATE_CHANGE, function() : void { if (!lastUpdate) { pulse.start(); }[code]....
I'm currently able to record audio and video (from a webcam) to a Flash Media Server. However, in some cases users have a webcam with no builtin
microphone. In that case the flash client uses the default microphone with 'Microphone.getMicrophone();' and possibly selects the micrphone of the PC.
A delay between audio and video is caused in cases with a separated webcam and microphone. There isn't a lot of delay on an internal network (e.g. LAN) however, there is a very large delay between audio and video on an external network (e.g. WAN).
I've a site where consumer can take a live meeting with the beauty consultant. The problem I'm facing is during the video chat. Basically there is a delay of 5 seconds between Video and Audio when I access the site from out of my network but when I access it within my network (VPN) then it's work fine.
View 14 RepliesIs it possible to dedicate separate bandwidth for both audio and video during for example video chat?
Basically my end goal is to give a minimum bandwidth to audio (so it has a minimum quality, at least), then the video will use the rest
I'm creating a video chat application, and no matter what combination of Camera/Microphone/NetStream properties and functions I use, I cannot get high quality video/audio. I get occasional audio latency, pixelated video, occasional frozen video and the degree of each depends on the combination of properties/functions I set/call.
Others such as TokBox, TinyChat, Chat Roulette, etc. have achieved great video/audio quality with FMS, what is the secret? At least point me in the right direction, because right now I'm not impressed with FMS ability to provide a good video/audio experience. BTW, I'm using a P2P mesh using a group specifier, not NetStream.DIRECT_CONNECTIONS.
How do i open an .avi file directly into windows media player or winamp on button click in flash.
View 2 RepliesI'm working on a project that I want to export as a .avi file. I'm using Flash 8. I can go through the steps of exporting the movie fine, but once I try to play it in Windows Media Player, I get this error:
"Windows Media Player cannot play the file. The Player might not support the file type or might not support the codec that was used to compress the file."
I've tried playing it in VLC and DIVX player as well I got similar error messages. This is a time sensative project,
I've got a swf which uses AS 3 to load separate audio (mp3) and video (flv) files. The reason they're separate is because the audio is just background music while the video is navigatable. The video kinda goes along with the audio, but it's not imperative that the two sync perfectly. However, the audio always starts playing before enough of the video has loaded to begin streaming.I'm at a loss as to how to get the two to at least START at the same time.
View 14 RepliesMy question is how possible creating streamable audio files /mp3/flv/ from multiple input files. The server is vps linux without soundcard, installed flash media server 3.5. My task is creating mixed mp3 output file.The input files are 2 mp3 file = 2 channel, uploaded to a server by the user.Controls: volume pitch, equalizer, fading that is controlled from client side flash appThe problem it should be in real time, when the user control the volume pitcher channels etc could be heard the result in the client's flash player on client side.For that purpose I tried to split the audio files into 1 sec pieces, and changing the splits only, and when done joining them together.
Feeding them to flash media server there was more problem:-the server streamed not the actual file but probably from cache -the streaming was always stopped after 1-2 seconds - using client side dynamic streaming /without joining the files / only the last file was played - using server side playlist playing more files was not played all the files So the question which way possible creating streamable files, or is there a better solution than splitting them.
I'm new to Flash media server family. I need a server that can capture user recorded video/audio (through a flash recorder) and save it as a flv file on the server. which one of those server family is for me? I'm currently doing it using Red5, but would like to try out Flash media server as well.
View 1 RepliesWe are using FMS3.5 for VOD streaming. It's spotted that when we are using Flash Player Version = WIN 10.0.42.34/10,0,45,2, it is encountered that the video picture is hang but audio keeps playing after our commercial break point. we will first pause the video content and then use the same object to play the instream ad. After that, the video is resume when instream ad complete.
View 1 RepliesWe have one functionality in which one user can communicate with the other user at the same time through flash media server3.5. In this fucnitonality we are catching stream from both end through camera and pass it to flash media server. On FMS side this streams gets stored also we are displaying those recorded flv files side by side to the corresponding user so that they can communicate with each other. In this situation we are facing a video and audio latency upto 1.5 to 2 sec.
View 2 RepliesI have a project I'm working where I need a single media player to be able to play either audio or video depending on what gets passed (flv or m4a).
PHP Code:
ExternalInterface.addCallback("playMedia", playMedia);
// The way a/v gets changed is from a dropdown menu in the HTMLvar av:String;
/ The param that gets passed to my playMedia function which will determine if its audio or video
var nc:NetConnection = new NetConnection();nc.connect(null);var ns:NetStream = new NetStream(nc);ns.client(this);
[Code] .....
How do I add the audio to the container in such a way that it 'replaces' the video that's in the container? I may want to add a static image as a visual representation.*/
ns.play(av);
}}
I want to create an equelizer for audio and video files in Flash/Flex.
1) Is it possible for audio files other than MP3(i.e. FLV, MP4 etc.)
2) Is it possible for video file to display equilizer?
3) I am creating a voice and video recorder application using FMS 3.5.Now is it possible to display sound equilizer while recording as well as while playing the netstream ?
I have this sample code from the e-book: "Learning Flash Media Server 3". The purpose of the code is to create a FLV. The code is not running as it should. When I click on the 'record' button, the label is to change to 'recording', that dosen't seem to happen and also when I click on the 'Stop Record' button, I get the following error:
"TypeError: Error #1009: Cannot access a property or method of a null object reference.at MinRecord/stopRecord()"
[Code]....
My deduction is that the 'if' statement in the 'startRecord' function is not resolving to 'true' and hence the label is not changing to 'Recording'. Also I feel that the assingment to the variable 'ns' of type NetStream is not being done and hence in the function 'stopRecord' I get the above mentioned error message when I click on the stop button. How do I rectify these problems?
I'm trying to record a stream from a webcam using FMS4 developer edition. The streams are recording on a linux box in .flv files. These files though have problems.
1 - The video quality is terrible. Fuzzy/blocky. Any kind of motion looks awful. Is there any way to improve this?
2 - The sound jumps/skips and goes out of time with the video.
As it is now this is useless. I am trying to make a system where a user records a short video from the camera and then I upload it to YouTube from my server. If you use Youtube's webcam page the video quality is quite acceptable and the audio is obviously in sync too, so they must know something I don't. [URL]..
I have read in FMIS 4 "new features" that "absolute timecode" allows to switch audio tracks while playing a video (managing synch). Is there any exemple showing how to use this funtionnality (server config, flash player action script exemple)?
View 5 Replies