How do I go from 1 scene in a file, to a specific scene in another file? Must I use those Named Anchors, and whats the scripting then??This is what I've got at the moment:
Code:
on (release, keyPress "<Left>") {
loadMovieNum("presentation.swf", 0);
[code].....
so I have some buttons that, as of right now, simply trigger the scene to move on while at the same time killing some particle effect animations I have spawning when the animation is idle. What I now need to do is make these events move on to a specific scene AFTER the rest of the scene's animation has played out (about 400 more frames) I'm figuring that the gotoAndPlay command has to be tied to some sort of timer variable that I would have to figure out based on my fps. Or maybe there is a way to set up a timer directly tied to a certain amount of frames allowed to go by. I'm pretty noob at actionscript, so keep that in mind. Here is the script at the point where the animation pauses to await user input on the buttons:
[Code]....
I am making an online portfolio and I have created the following scenes:homeaboutontactright now, I have three movie clips on the home screen that I have created into buttons.
on (press) {
go to Scene 2, frame 25 ?????????????????????
}
What I would like to do is after someone clicks on the button, it should then jump to another scene's specific frame number. So for example when you press the "about" button, the playhead goes to the "about" scene to 25th frame. Same thing for each button
ive made a button in the scene 1 which i have managed to navigate to scene 2 but when i click the button it goes to scene 2 but displays everthing that is in scene 1 in scene 2, how can sort this out so upon the button click in scene 1 it goes to scene 2 and only display content in scene2.
[Code]...
Check out this code:
[CODE]...
everything here is fine. It opens finely. But... i want to pass parameters where if i click a button in html page My.swf should open a particular scene called 'Scene 2' rather than scene 1. i tried
[CODE]...
I think this is easy question because i'am just start to learning flash and as. So how can i save a scene content into graphic file (jpg)?
View 1 RepliesI have a flash file with about 20 different scenes in it. And in one of the scenes there is an audio file that is 15 seconds long. The sound is on a menu page so i only want it in that scene. But if you are on that page for less than 15 seconds and go to another page then it carries on the sound into the next scene and if you go to and from the menu page to another scenes in quick succession you get a build up of sound which is horrible.
View 1 RepliesI am new to CS5 and I want to create a demo where each scene has it owns sound file. So going from scene 1 to scene 2, the sound from scene 1 should stop and the sound of scene 2 should begin then after the sound file from scene 2 finish it will automatically go to scene 3 then the sound file from scene 3 will begin. Each scene has a jpg file in it to show the user what I am talking about.
View 1 RepliesI have a movieclip in my main timeline as a menu. I want to go to a different scene in the main swf file depending on what scene I am in. Right now I'm using an if statement on the button within the menu (see below) but when I click on the button it only plays the first line of the if statement.
on (rollOver, dragOver) {
gotoAndPlay("s1");
} on (rollOut, dragOut) {
gotoAndPlay("s2");
} on (release) {
[Code] .....
lets say i want an external FLV flie to play using a component. How can I force at the end of the flv file to go to another frame/scene?So imagine an external video clip plays, once its finished your force to a screen that says "click to go to my website".is this possible? Or does the flv have to be imported to stage???
View 1 RepliesNo..not that type of parenting ;DOK,I have a main scene, then sitting in the root scene I have 2 movie clips.1)centro2)fotoIn the first movie "centro" there is a menu btnI want this menu btn to call up mclarge + its frame (1) thats housed 3 levels inside the foto mc in root.
Main scene - (1) centro (banner which houses menu btn)
(2) foto_mc
- Main_boy_mc (<---works if menu btn houses in here)
[code].....
I have a movie with 4 or 5 scenes. How can i make the movie jump from scene 1 to another scene by clicking on a button?
View 5 RepliesArgumentError: Error #2109: Frame label null not found in scene Scene 1. at flash.display::MovieClip/gotoAndPlay() at intro_fla::MainTimeline/intro_fla::frame606()[intro_fla.MainTimeline: :frame606:3]
View 3 RepliesI'm trying break down a large Flash project into smaller swf's using a Loader :
stop();
var reqA:URLRequest = new URLRequest("New_Inro.swf");var loaderA:Loader = new Loader();
function imageLoadedA(event:Event):void { addChild(loaderA);} loaderA.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoadedA);loaderA.load(reqA);
Some of these swf files are animations which have code that states :
MovieClip(parent).gotoAndStop("frameThree");
The first loader works but I cannot get that swf to move on to the next frame(frameThree) to load the next swf file
Instead I get this message
ArgumentError: Error #2109: Frame label frameThree not found in scene Scene 1. at flash.display::MovieClip/gotoAndStop() at New_Inro_fla::MainGuy_1/frame146()[New_Inro_fla.MainGuy_1::frame146:2 ]
I'm getting this error in the OUTPUT window, when I PREVIEW (COMMAND + RETURN) my SWF:
ArgumentError: Error #2109: Frame label nGallery_btn not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at BrookBrovazMusic004_fla::MainTimeline/pageSelect()
- The funny thing is that the SWF works the way I want it to. You can view it here: http://brookbrovaz.com
- I just don't like the idea that something's wrong, according to the OUTPUT window anyway.
[Code]...
the error is:
ArgumentError: Error #2109: Frame label instance121 not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at Untitled_fla::MainTimeline/goLabel()
this is my code:
stop();
function goLabel(e:MouseEvent):void
{
[code]....
i am using a movie clip button to open a swf with a loader. hope i m not missing any information/other coding....
I've created a class which simulates an action for example a ball bouncing about a screen thus I'd create it like so:
Code:
var Ball1:ball = new ball(x,y);
How would I go about adding this to a loop, in a sense of every frame add another ball till you reach the maximum balls
currently after looking in help, google and forums this is all I could find
Code:
var ["Ball"+currentball]:ball = new ball(x,y);
but this doesn't seem to work and just causes
"**Error** Scene=Scene 1, layer=balls, frame=1:Line 15: Identifier expected"
I have created a new Flash file using A3.It has a menu system which all works, I have included trace code that outputs button pressed.So the next step is when the right button is clicked it takes them to the next scene. Please note I have coded it in AS3. When I compile it returns no error however at run time when I click on the buttomit returns the following error:
Menu 1, button 1
ArgumentError: Error #2109: Frame label contact not found in scene Scene 1.
at flash.display::MovieClip/gotoAndStop()
at menuformason_fla::MainTimeline/itemButtons()
[code]....
i got this script out of a flash MX book but it doesnt seem to be working. i'm trying to create a preloader with a simple status bar that loads a scene within the same file. the scene does end up loading. but the status bar just says "100% completed" the whole time its loading the scene. is there a flaw in the script or an i doing something else wrong?
[Code]...
i got this script out of a flash MX book but it doesnt seem to be working....im trying to create a preloader with a simple status bar that loads a scene within the same file. the scene does end up loading....but the status bar just says "100% completed" the whole time its loading the scene. is there a flaw in the script or an i doing something else wrong?
onClipEvent(enterFrame) {
loaded = _root.getBytesLoaded();
total = _root.getBytesLoaded();
I've got a script that once a button is clicked it loads an external SWF on level 0. However, I need to go to a specific scene in the SWF. I've searched the usual ie Flash Kit with no luck!
Here's what I've got
on (release) {
loadMovieNum("CRM_1.swf", 0, "GET");
}
What script do I need to add and where?
How do I go from 1 scene in a file, to a specific scene in another file? Must I use those Named Anchors, and whats the scripting then??
This is what I've got at the moment:
Code:
on (release, keyPress "<Left>") {
loadMovieNum("presentation.swf", 0);
}
but it just starts the whole file from the start.. I want it to go to example: scene 5 in presentation.swf....??
The code below works fine in CS3. But I get the following code when I try to run it in CS4:
ArgumentError: Error #2108: Scene Scene 2 was not found.
at flash.display::MovieClip/gotoAndStop()
at
introActionscriptWorkFile_Scene1_fla::MainTimeline/gotoScene2()
Here is the code: (Note: "scene2Frame1" is a frame label).
When I place a FLVPlayback Object on scene 3 I get the following errorTypeError: Error #1009: Cannot access a property or method of a null object reference.atUntitled_fla::MainTimeline/__setProp_flv_promo1_Scene3_Layer1_0()atUntitled_fla::MainTimeline/frame1()
View 11 RepliesI have an eventListener on a particular movieClip that triggers the timeline to play when clicked. This should play through a short tween, then hit another piece of actionscript in the last frame of that scene, which should take you to the next scene. I also have an audio file loaded into a soundChannel, as well as a few timers that operate a click prompt over the movieClip already mentioned. My bug is that if you click on said movieClip before the soundChannel is finished playing, all functions properly. However, if you wait for the sound to finish, this initiates a few timers that cause a prompt to fade in, telling you to click on the movieClip. If you click on it, still, everything works fine. But once the timers complete their work, and the click prompt fades back out, the tweens do not operate properly. If you then click on the movieClip, the timeline seems to play doubletime until coming to a stop() action in the next scene.
[URL]
jumping from from scene to scene once the play head reaches the end in AS3? Scenes do not play one after another like they used to. Below is some code I found that works with errors, however I'm not using a MC like the code displays "mc1". Not really sure on how the MC fits in? import flash.display.Scene; var scene:Scene = mc1.currentScene;trace(scene.name + ": " + scene.numFrames + " frames");
View 4 RepliesI believe I'm not alone in this problem but I don't see any answers in any of the forums.I have a movie clip that has a button that I wish to take me and play my first scene at frame 1.I labeled my the 1st frame "startLabel" and my scene is named "mainScene", and that's where I want to go from my "button" that is placed in my "movie clip symbol scene".
[Code]...
I made a scene with movement and everything, but when I convert it to a symbol I lose the movement frames. I want to be able to import it as an object so that the animation loops for as long as I need it to in the other project.
View 1 Repliesis at all possible to load a movie at a particular scene rather than it launching into the first scene automatically? Or is this impossible?
View 1 Repliesi am making an animation, i have about 8 scenes. for some reason it starts playing the sound from the next scene in the middle of the current scene. why?? i checked movie explorer and the sound is in another scene. does that sound like a flash bug, or just me? it is a big file, could that be it.
View 4 Replies