This shouldn't be too difficult, but what I have is a button, which in the 'over' state I want to load an external image, and then have the image disappear when the users mouse hovers off the button
View 2 RepliesWhen my mouse leaves the thumbnail image the previewArea image stays there. What is the coding to make the image disappear once the mouse leaves the thumbnail? I think that it's either in the previewLoaded or tn_out is where the script should go.
function previewLoaded(e:Event):void {
var flashmo_tn_bm:Bitmap = Bitmap(e.target.content);
flashmo_tn_bm.smoothing = true;
[code]....
I'm trying to find out how to make a simple image gallery which changes image upon a mouse click on a button, when a button is pressed I want the image to slide in from the left into the viewable area and then when another image is selected I want the previous image that was viewed to remain in the screen and then the new image slide across over the top to replace the image.
I can get the images to slide across from the left upon a mouse click however I can't change the layer order so if image 6 is viewed and then I click to see image 1, the image will slide into place however it will be below image 6 so therefore not viewable.
I don't have an example of what I'm after but I hope my explanation was good enough, I've seen this been done in javascript but I have to use flash and am unable to replicate the effect I'm after
I want an image to change when users scroll over a seperate button. Here is my code for that button:[code]The name of the image I want to change is bikebutton. I want frame two of bikebutton to display when this button is moused over. I want frame one of bikebutton to play when the button is moused off.
View 3 RepliesI need to make a series of 35 buttons that display an image when clicked. However, I need the previous displayed image to disappear when any other button is clicked.I have this to toggle the images on/off:[code]Any idea what I can add to the function to turn all the other buttons visibility to false when any other button is clicked?
View 2 RepliesI want a data tip to appear when mouse pointer is over any point of the chart, not only when pointer is directly over a data point.
View 1 RepliesI'm trying to create a button which displays an animation when the mouse hovers over it, and then performs an exit animation when it hovers out. I've looked at many of the major tutorials for this without success.The one I'm looking at right now, basically gets the user to create a movie clip containing an animation of a button at different states ('up', 'over' and 'out'). It then uses actionscript to play some of the sequence on rollOver, and the rest of the sequence on rollOUT. It then asks for this code to be pasted on an actions layer on the main stage:
1. btn1_mc.buttonMode = true;
2. btn1_mc.addEventListener(MouseEvent.ROLL_OVER,onBu ttonOver);
3. btn1_mc.addEventListener(MouseEvent.ROLL_OUT,onBut tonOut);
[code]....
But the error I get when I try and use it is:
"Location: Line 5. Description: The class or interface 'MouseEvent' could not be loaded. Source: function onButtonOver(e:MouseEvent):void
Location: Line 10. Description: The class or interface 'MouseEvent' could not be loaded. Source: function onButtonOut(e:MouseEvent):void"
The weird thing is that I downloaded the .fla file from the tutorial page and managed to get my button working by pasting it in there, but when pasting that back into my movie, this error returned.
I'd like to show a movie clip when you hover over a button and then have the movie clip disappear when you move off the button. I am using a button because the button has different visual states and thought it would be easier than coding a mc to function like a button.
View 2 RepliesI have converted an image into a button and am using the following code to use it as an external link.
[Code]...
This works fine which is great but I would like for it to display information about the link when the user hovers their mouse over the button. How would I do this?
I need to do this project for school and I'm missing this one thing. I'm working in actionscript3 and have a panoramic picture of a room, that I'd like to move/slide(left and right) whenever the mouse cursor hovers near the edge of the screen. I'd also like to loop that image, so that you could slide it for eternity :) I tried to find a script for that but apparently the language barrier is too much for me.
View 1 RepliesHow do I make a movie clip disappear once the cursor hovers over it?
View 5 RepliesI'm trying to create a simple banner ad where the mouse hovers over the button and a panel shows up over some content of the site.[URL]I have two different .swfs: the container, which is the button and a loaded swf that has the animation that comes up when the button is clicked. The button is only 183 x 40px where as the loaded swf is 183 x 160px.When the loader swf is loaded, it takes the dimensions of the button.
Is there a way to have the loader swf be its original dimensions, so when the mouse hovers over the button, the loader swf covers some of the content on the Web site?Also, how can I change the MouseEvent to load the SWF when the mouse is only over the button and not clicking?
The simple code I have so far:
stop();
var myLoader:Loader = new Loader();
open_btn.addEventListener(MouseEvent.CLICK, loadBanner);
[code]....
I would like to make a flash movie with a picture, where when the user holds down the mouse button, part of another picture will emerge in that general area (like a magnifying glass looking into another dimension).
Technically, my idea was to make a flash file with two images, and then code the mouse to be able to make the top picture transparent in a circle-like area around the cursor, while the mouse button is down.
But how to do that? I am using Flash CS4, but I don't really care if the solution is in AS2, or AS3, as long as it works
I have a flash file where a button loads a movie clip with he following code:
on (rollover) {
this.attachMovie("proj_1_1_mc", "window", 1);
window._x = 100;
window._y = 100;
unloadMovie("proj_");
}
How do i modify this so that the proj_1_1_mc movieclip loads an external image instead of putting it in the flash file and thus bloating the .swf file?
im messing with a movieclip symbol and i want to make a button, what'd i mean on Mouse over display/change this image in this X,Y cords or replace this image, something close to what buttonSymbol does but i want to make it using movieClip symbol...
and i have no idea how to do it.. i started like this:
[Code]....
Is there a way to make the transparent area from an png image not to register when I add with a mouse event to that image? What is happening is the rectangle around the symbol is effected by the mouse event.
View 2 RepliesI created a simple mouseover (like this one http:url... )with one small image that grows to a LARGER image directly on top of the smaller image when mouse is OVER the smaller image. When user mouses OVER the smaller image the larger image appears correctly.Problem is that even when user mouses OVER the "boundries" of where the LARGER image WILL appear, that also causes larger image to appear. What I want is for the larger image to appear ONLY when mouse is OVER the smaller image.
View 2 RepliesWhen I use Loader to load the same external image twice (same URL), what happens the second time? Is it taken from cache or does it actually load again?
View 3 RepliesI only want to display a single image (no gallery)I would like to get the url for the image via an xml.Here is a copy of my current action script which has already pulled in the xml data which includes the node with the url for the photo.
import flash.events.Event;
import flash.events.MouseEvent;
import flash.net.URLLoader;
[code].....
I would like to load an external image to a flashwebsite.I do this using a Loader.[code]When I test the swf offline, it works. But when I put everything online and I browse to the HTML file, it doesn't load the images anymore.What do I have to do to load external images online?
View 3 RepliesI'm having issue with loading this image [URL] onto my stage. I can load the image perfectly when I load locally however I cannot open from any external domains. I'm using cs4 windows vista if that helps.
View 3 RepliesI have used fileRef to allow user to load an external image to a swf.But... How do I access the image to add smoothing to it?[code]
View 3 RepliesI'm trying to load an jpg file that is outside my flash SWF file and I've tried this code:
loadMovieNum("1.jpg", 1);
But it doesn't work.
Is there any simple code to load an external jpeg image into Flash?
I have this code which allows me to replace the mouse cursor with an image but i would also like to change the image when the mouse is clicked down using a different image. the code i am using for just replacing the mouse cursor is[code]...
i tried using a different code which i found but it failed to work with my project can anyone help me please
i have two images, when i mouse over first image at the same time glow effect raised on second image.
View 2 Repliesi am trying to make a animation in which Image change in slice while the mouse over the image and its come back to original image with slice yani reverce
View 1 RepliesIs there a way have smoothing = true on an image on the stage that isn't dynamically added.I know about "allow smoothing" .What I want to do is have the image smoothing = true when mouse is over the image so a tween event can occur. The reason I want to do it like this is because I don't like it when "allow smoothing'is ticked the image is blurred.
View 1 RepliesI have an image gallery that I made with this tutorial (AS3 Photo Viewer Tutorial), and I'm trying to get an external preloader to load it. The only tweaks I've made to the tutorial file have been to change the stage size, and change the name and contents of the xml file.The preloader, which uses something I downloaded from preloaderz, worked with another, simpler swf, but when I try it with this one, I get
Quote:TypeError: Error #1009: Cannot access a property or method of a null object reference.
at PhotoViewer()
I don't know why this won't work. Another thing I don't quite get is how the .as file is attached, because the PhotoViewer.fla file appears to be blank, with nothing I can see in the timeline/ stage, or in the actionscript. Before trying the external preloader, I tried adding one to PhotoViewer.fla, using script from the ActionScript 3 Classroom in a book, which worked in their lesson file, but not with this file. I also tried moving the script to the .as file, but that didn't work either.I'm using Flash CS4. If all else fails, I might have to try a simpler image gallery, that would hopefully work with a preloader, but I like how this one looks.
Is there any way to load an external image and add it to more than one movie clip?
View 3 Repliesi'd like to load an external image in a movieclip via
createEmptyMovieClip(..)
mcName.loadMovie( imageName )
trying to set the mc-size via
mcName._width = 100
mcName._height = 100
nothing changes. furthermore - any possibilities to zoom or stretch the image to get the size provided from the mc?