I want to load my movie into _root.I have preload.swf which all it is is the preloader and I want to load home_page.swf. If I loadclip into a movieClip its fine, but not if I do _root...or alternatively, 'this'The reason I want to do _root, is the site I am working on, the previous developer on it used _root everywhere and I dont want to have to go and change everything that has _root in it.
View 3 RepliesMainMove.swf is doing a loadmovie of SecondMovie.swfThe Button that loads SecondMovie.swf also disables other buttons in MainMovie.swfon (release) { _root.intro_btn.enabled = flase; loadMovieNum("SecondMovie.swf", 2);How do I Re enabled the Buttons in MainMovie.swf from a Button within SecondMovie.swf???
View 4 RepliesIn the code below i want to change the _root.broj and _root.logo variables inside the function which returns values from .php file. Inside the function everything works fine and all values are correct but when i trace var broj outside the function it's still 0.
var result_lv:LoadVars = new LoadVars();
var send_lv:LoadVars = new LoadVars();
var broj:Number=0;
var logo = new Array();
[Code].....
When I try to use loadMovie, it will not load to an instance (unless it's something that's in the same directory). I figured this was some sort of security thing, but I was able to load the movie into _root just fine.
View 1 Repliesim lookin to make this so that the points taken from the _root.cargo are multipled by 10 and added to _root.totalscore
[Code]...
I just need to know where to reference _root to load a swf into an empty mc using an asfunction. Canadian out with this previous question, and the trace seems to be working, however my clips aren't loading. There needs to be a reference to root somewhere right? Everywhere I try to add it yields the same lack of result. Here's Canadian's code:
[Code]...
got a problem.. if i load an image into _root.pic_mc movieclip and its loaded i try to load anotherone in the same mc.. now the pic_mc turns white and the picture disappears.. so i tried to make a duplicateMovieClip on the pic_mc but this also didn't work. any other solution on this problem?
View 2 Repliesif a condition is true, then:_root.(MC with instance name that is the value of "_root.eelmine").nextFrame(); is this correct?_root._root[eelmine].nextFrame();
View 16 RepliesI tried to connect a mc to the _root, with the statement
Code:
_root.attachMovie("missile", 'missile'+x, x+10);
It was linked and everything but for some reason didn't work. Am i overlooking something?
I have a movie with 3 scenes, the last one has only just one statement on the timeline:_root.stop(), and there are not library objects neither ones created by code. Just and empty stage with the statement I told.I know I am not an expert in Flash yet, the entire design of code in timeline and movieclips are not very clear and tidy.When the movie reaches the scene three, it stays one or two seconds (not the same amount of time in each playing) and replay from scene one and the things become chaotics from there. I revisited one and two times the code and objects from movie explorer tool and can't figure out what demon makes re-start the movie when it must stop in the last scene
View 1 RepliesI'd like to control a movie clips current frame by another movie clips action script.I realise the following controls the outside (root) frame time line:
on(release){
_root.gotoAndStop(1);
}
but I'm not sure how to apply that to my other movie clip. I'm guessing it would be something like this:
on(release){
_*movie_clip_name*.gotoAndStop(1);
}
I have a fadeIn prototype of:
[Code]....
This fades all my objects so on and so forth. I have a movie that is loaded into the _root, inside that is an mc called photos, jpgs are loaded into here and faded in. This photos being loaded in thing is based off some other code written by ... I can't remember I was looking to save time Anyway, thats like so.
[Code]....
I just recently began migrating from AS2 to AS3, and I have of course realized that I can no longer move the "_root" by changing the _x and _y positions of the _root (which no longer exists in AS3). How can I do this in AS3 (specifying _x, _y, _z possibly of the "_root")?
View 2 RepliesI'm using this complex rollover button on my site i found here --> [URL] What i'm looking to do is have this effect trigered when a second button is rolled over as well. Is there a way to target this movie clip effect from the _root timeline? I was able to achieve this halfway by using labels but I am not able to reverse the animation on roll out with this method.
View 2 RepliesI'm having some weirdness with a project that I'm doing in IE. Long story short, I've got a basic shell that loads in external SWFs based on user feedback. Once those SWFs get loaded in, they execute functions from the shell (_root) movie. It works great in Firefox, but immediately breaks (no way) in IE. The movie gets loaded in, but none of the functions run.
I suspect it has something to do with security, because, for a variety of reasons, I have to load the SWFs from their absolute location, rather than their relative location. When I test it locally (but loading the movies from their absolute, live location), everything still works, but I get that damn security warning that reads like this:
[Code]....
// code to find out all the movieclips on _root
for (var property in _root) {
if (typeof _root[property] == "movieclip") {
var clipName = _root[property]._name;
// I am trying to use the var clipName to find the location of each movie clip found on _root in the next line
//the next line gives me "undefined" why?
clipBounds = [clipName]getBounds(_root);
}
}
Im new in actionsript and I have a problem with _root. I have a swf. with two MC en the main stage: Mc_menu and Mc_pages. The Mc_menu has several buttons with the code "_root.pages=2" which moves the different pages that are in the Mc_pages. If I publish the fla. it works perfectly. Now, when I wanted to load this swf into another with "loadmovie" with an empty MC the pages stop working... I guess is because of the rutes, but i don�t know how to refer them correctly. What I have right now is: in the main stage an empty MC and a button with the code:
[Code]...
I'm trying to unload an external SWF on _root to load a new one instead. I've tried (almost) everything but can't figure it out... I get this error : "Error #1010: A term is undefined and has no properties."
[Code]....
I've been searching the forum for an answer, but I'm either not searching for the appropiate keywords, or having really really bad luck... so feel free to point me to any threads that might contain the solution to this.
Here's what I'm trying to do:
I have a site which is fully made in flash, and has one big index.swf file. Each section loads dinamically into it with a preloader (this works OK).
I didn't make a preloader for the main index.swf at first because it was really small, but as I've added more and more features to the site, the index.swf grew bigger and bigger, until I felt I need a prealoader for it as well.
However, I NEED the index.swf to load into the ROOT of the main timeline, as there are some functions in the site that call movieclips with absolute paths ("_root....") rather than relative ones ("_parent._parent...."), and I can't change that for various reasons, so I need to keep that hierarchy intact.
But there's an obvious problem if I try to do this via a MovieClipLoader:
If I tell the MovieClipLoader object to load the clip into "_root" like this[code]...
i'm having this weird pb i don't understand, could someone help me? i'm driving crazy here..what i do is load a movie from a movie but the 2nd movie load a variable. when i test the 2nd movie, it loads its variable and displays it as wanted, but when i load it from the 1st movie, the 2nd movie loads but seem not to load anymore its variable..
[Code]...
I'm currently making an animation which will eventually exceed the 16,000 frame limit (don't ask haha), so, short of making two movies and having to just start up the next one, what is the code for loading a movie? I presume they need to be in the same directory? So basically all I want is on the last frame of the movie the code executes and the second movie file opens up and starts. I guess I'd want the current movie to close, too.
View 1 RepliesI Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 RepliesI am pulling double duty with this question as it serves two purposes. I am developing a total flash controlled ad system for myself, but also need to use the same theory for a project for work.
Concept: I have a main movie (ad rotator system) that I then want to randomly load other swf's (individual ads) into this main swf after a set period of time. The random load I got set no problem. The problem I am having is to get it to move to the new Frame label of the main movie which then loads the smaller swfs. I am using the LoadMovie with nInterval time delay command in flash to load the movies.
[Code]....
I am making a flipping page book in flash and have had to create sections in different movies because it kept crashing when i tried to have all the pages in the same movie. I have 3 movies 'page flip4', 'pageflip4-2', and 'page flip 4-3' . I have used the code below to go (flip bacwards) from 'page flip4-2' to the frame label ''backflip'' in 'page flip4'..This works fine
Code:
on (press) {
loadMovieNum("page flip4.swf", 1);
}
[Code].....
Does someone have a working fla to illustrate how to load an external movie and zoom and pan to specific location of this movie (with easing)? With actionscript, not necessarily with a control for the user. I am looking for it for some time and unfortunately my programming abilities are not yet sufficient to find it out from scratch (but I am working on it).
View 2 RepliesI'm trying to do a demo with a fastforward button and a rewind button that will go to the next scene and previous scene...however, due to the format that my predecessor created used...I'm stuck with alot of scenes. The navbar (ff and rewind buttons) is in a .swf file called main. The actual demo is in demo3.swf. I created a loader scene to redirect to the correct scene (when ff and rewind are hit), but I'm not sure how to pass the variables needed from the main movie.
View 4 RepliesI have a movie. In it are some buttons and a dynamic text field. When I press the buttons is should load text from a database into the dynamic text field. If I run the movie by itself (ie. not by LoadMovie()-ing it into a different movie) the dynamic text field gets filled with text and all is well and good. However, when I use LoadMovie() to load this very same movie into my main movie, the buttons no longer work; the text field stays empty.
[Code]...
Let say A is the main movie and B will be a external swf file that i'm going to load into A movie. The problems is that, some actionscript(AS) in my B movie is not working anymore after i load it into A movie. I believe that the AS in my B movie is not working anymore because it is refer to A as the _root instead of B movie as _root. This can be a common problem. So, i wonder what should i change in the B movie AS in order to make it work in A movie.
View 3 Repliesi wanna change color of mc. I have buttom Test and Parametri. In Test is movie testing.swf in Parametri you can change color of movie clips. in file starttesting is make like this:
in layer1 is mcPlayer. In this mcPlayer are three layers, action, container and buttoms. in action layer is this code:
Code:
mcButtonParametri.onRelease = function():Void{
addWindow("mcPar");
}
[Code]....
How can I change color of mcOksid(testing.fla), but color will be change when i push a upload buttom? WHen i push reset buttom, the color will come back to default.
Second problem, in testing.fla in layer OKSID, i have mcOksid and mcOksid2. Know if i change color of mcOksid to blue, mcOksid2 has to be blue too.
What I'd like to do is have a checkbox, that when it is checked it loads a movie into an empty movie clip, and when it is unchecked, it loads a different movie into the empty movie clip.Also if possible I'd like to find a way to output to a variable whether the same checkbox is checked or not. And send the info from the variable in an email.
View 11 Replies