ActionScript 2.0 :: Level - Movie Is Not Working Anymore After Load It Into Other Movie
Aug 23, 2004
Let say A is the main movie and B will be a external swf file that i'm going to load into A movie. The problems is that, some actionscript(AS) in my B movie is not working anymore after i load it into A movie. I believe that the AS in my B movie is not working anymore because it is refer to A as the _root instead of B movie as _root. This can be a common problem. So, i wonder what should i change in the B movie AS in order to make it work in A movie.
View 3 Replies
Similar Posts:
Nov 5, 2004
I have a movie that's 500x400 px in level 0 and has lots of thumbnails with pictures that I want to open. the thumbnails open a 500x400 px movie above the other but on level 1. the problem is that when the new movie loads on level 1, the thumbnails on level 0 (that are now hidden by the new movie) are still active, and if i click anywere in the movie on level 1, it trigger an action from level 0. Is it possible to load a movie to level 1 that deactivates the movie in level 0 without unloading it?
View 1 Replies
Oct 13, 2009
Is there any method or possibility to load AS3 flash movie in AS2 on level 1, or higer, or in target loder.
View 2 Replies
Apr 19, 2004
I have a button that is a few levels down in movie clips. When It is pressed, it is supposed to load diamonds.swf. It does this, but not on the first press. On the first press the _root time line goes to and plays "fade," but doesn't execute the rest of the script. [code]...
View 2 Replies
Jan 5, 2006
I'm designing a site at the moment & I've run into a minor snag. I am loading about five external swf's, for each page of the site, from the main 'home' page. you can view it here Trouble with levels. I can load the movies fine, but what I want is to load each new movie into a higher level than the last, as each movie appears with a mask (for an example have a look at the site I've done then click on the 'Contact Us' button - that is what I want to do on all of the pages...) all of the swf's are loaded into level one with the exception of the 'Contact Us' page. (By the way, there is no 'News' page yet)
The very simple code I used to load the movies is:
Code:
on (release) {
loadMovieNum("contact.swf", 2);
}
View 1 Replies
Feb 7, 2007
I'm using xml to load .flvs into a movie player. I have it setup to load an external .swf to level 1 when the movie is finished. My goal is to have the .swf on level 1 select the next .flv from the xml array by way of simple buttons. Needless to say, it's not working. Anyone care to give it a crack?
[Code]...
View 3 Replies
Jan 15, 2008
how do i load a movie clip SYMBOL at the highest level and then unload it.
i dont want a SFW or JPG to be loaded- that would be one of the symbols from the same swf file.
the issue is- i have used "getNextHighestDepth()" to create movie clips.. now i need to add a box on top of that- so again, i will have to use "getNextHighestDepth()" - which im having hard time to unload (when i use duplicateMovieClip) -
View 5 Replies
Jul 25, 2006
assigning a level for the external movie(reseller_locations.swf) loaded to a moivie clip(clipHolder)
code
loadMovie("reseller_locations.swf", this._parent.clipHolder);
View 1 Replies
Apr 27, 2011
i was trying to make a movie clip visible (it starts invisible), than invisible again. It gets visible, but i could't make it turn invisible again! Same thing happened with buttonMode propertie. I applied both only for movieClips and buttons, have no idea what is happening.
View 4 Replies
Dec 3, 2009
I'm currently making an animation which will eventually exceed the 16,000 frame limit (don't ask haha), so, short of making two movies and having to just start up the next one, what is the code for loading a movie? I presume they need to be in the same directory? So basically all I want is on the last frame of the movie the code executes and the second movie file opens up and starts. I guess I'd want the current movie to close, too.
View 1 Replies
Feb 12, 2009
I Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 Replies
Feb 25, 2009
I'm trying to create a "for" loop to load thumbs into existing movie clips using the following code:[code]This should load thumbs 9-17. The trace shows the variable is incrementing but I'm not getting the thumbs to load.
View 2 Replies
Oct 6, 2009
I gotta simple swf file im loding in using this code
ActionScript Code:
onLoad = function () {
_root.loaderMC.loadMovie("avi/Hostage1.swf ");
}
[Code]....
this works fine when i publish the video in flash but once i view it in a browser none of the buttons work
View 2 Replies
Feb 25, 2004
i'm having this weird pb i don't understand, could someone help me? i'm driving crazy here..what i do is load a movie from a movie but the 2nd movie load a variable. when i test the 2nd movie, it loads its variable and displays it as wanted, but when i load it from the 1st movie, the 2nd movie loads but seem not to load anymore its variable..
[Code]...
View 11 Replies
Oct 5, 2007
So i made an expandable banner which overlaps a flash map. But now the flash map doesn't reacts any more for the part that is being overlap by the banner
View 1 Replies
Aug 26, 2010
I have two layers in my FLA both with empty movie clips as follows:In mc_Empty1, I attach a faded background movieclip as I wait for mc_Empty2 to load a SWF. Once the SWF is loaded into mc_Empty2, I want to remove the faded background movieclip from mc_Empty1. When I load the SWF from the main timeline, the onLoad() function works and removes the faded background from mc_Empty1. However, when I load the SWF from mc_target, the SWF loads, but the onLoad() function does not. Here's my AS2 code:
//Loading SWF from main timeline
mc_Empty1.attachMovie("mcFadedBg", "mc_FadedBg", 1);
mc_Empty2.loadMovie("My.swf");mc_Empty2.onLoad = function():Void{ trace("loaded"); //This works removeMovieClip(mc_Empty1.mc_FadedBg); //This works}
[code]....
I know I'm targeting properly because the SWF loads as it should, but the onLoad() function does not.
View 3 Replies
Aug 17, 2010
I have a button which I want to be dynamic in it's use. The var currentQuestion get's updated within another function. I have traced this and that's not the problem. The problem lies within the fact that after i have pressed the button once it's not working anymore. So the buttons works the first time, but after clicking it (and so updating the currentMovieclip to "question01_mc") it doesn't work anymore.
This is not the complete code, but just the part that matters,
Code: Select allvar currentQuestion = 0;
var currentMovieclip = "question00_mc";
var Root = root;
[Code] .....
View 3 Replies
Apr 28, 2006
Ok, for my site i have a preloader that slides in, then it slides out once it's finished. I decided to change a couple things, now the same file with some unrelated changes is giving me syntax errors when publishing it. Heres some code:
Code:
import mx.transitions.Tween;
preloader.bar._visible = false;
container._x = container._y=0;
[Code]....
View 12 Replies
May 9, 2009
does anyone noticed when using the latest flash player (10), all website thatuse preloading and is publihed with actionscript 2.0 is not working anymore. Only the onloadComplete or onLoadInit is triggerd, so preload animations are skiped. For example i made this website a while ago that worked fine with flash players up to verion 9.Now the preload percentage is not showing anywhere. I also tested other websites that i know off
where made in actionscript 2.0
View 1 Replies
Mar 17, 2009
I'm made a flash movie[main movie 1] where another movie is loading using the "loadMovie()"[this is the movie2] command.my probblem is - when I'm trying to loadsound in to the second movie
Code:
var mySound1:Sound = new Sound(this);
mySound1.loadSound("music.mp3",true);
[code]....
View 3 Replies
Jun 29, 2007
I have a big problem : My gallery ( with xml) was working perfect until yesterday . I uploaded my files to my server to test them. This morning I reopened the fla to make modif and big surprise : only the big image appears but no thumbs anymore in the scroller. I tried to trace the xml nodes but thay are now undefined. WHY? Everything is in the same folder.Nothing changed. I turned everything upside down but nothing. Does a uploading can affect some configuration ? Are the xml modified modified after being uploaded ?
View 3 Replies
Mar 31, 2009
I have a gallery which is created from the following scipt:
this.createEmptyMovieClip("images",100);
this.attachMovie("mask","mask",101);
etc....,
with the gallery still present i want a movie clip to appear ON TOP of this.
How is this done? i understand i need to set the z level but cannot find a simple explanation of how to do it. I do not want the image to be transparent (i've found lots of explanation on how to do this!)
View 1 Replies
Oct 14, 2011
It may be pretty basic but I'm looking for the easy way out. I've a container that loads a movie on level10 using loadMovieNum(). Is there a way I can get the name of this movie?.
View 5 Replies
Apr 18, 2010
I have an index.swf that loads the following movies.
loadMovieNum("home.swf", 4);
loadMovieNum("home_2.swf", 53);
loadMovieNum("help.swf", 50);
loadMovieNum("glossary.swf", 26);
loadMovieNum("Resources.swf", 27);
Is there a way to unload the home_2.swf from the index page when a button is clicked on the home.swf?
Home_2.swf is sort of a splash animation that plays over the navigation panel and then sits on the side so when any of the nav buttons are clicked on in level 4 .swf I want the level 53 .swf to unload.
View 2 Replies
Oct 19, 2005
Im having trouble with this script again. I need to load a movie on the 2nd leve this is the script here.
// Time value, in milliseconds, after which, failing any mouse movement, an action is to occur.
numMouseTimeoutMS = 30000;
// Define what is to happen should the mouse be moved.
[Code]....
View 2 Replies
May 11, 2006
Preload movie into level with percent, can this be done? I have tried several preloads from posts in the boards but none seem to work.
I have my main movie, and buttons that load the movies into the main movie by using LocalConnection(); I am using the following action script to load my movies, now I like to add a preload on the loadMovieNum(movie, 2); part.[code]...
View 1 Replies
Nov 5, 2002
I am loading a swf into a level, but need to use actionscript to manipulate its location in the root movie. This is my code:
stop ();
loadMovieNum ("logo_sm.swf", 1);
_level1._x = 300;
// whatever you want for upperleft x
_level1._y = 300;
// whatever you want for upperleft y
yet the loaded swf continues to load in its native position, rather than at any coordinate which I specify. It is riding in the upper left hand corner, even tho here I am indicating a much different position.
View 5 Replies
Mar 15, 2011
So I am a photographer, and I wrote my own gallery using AS3 Anyway I do NOT use the Flash IDE for anything other than debugging and compiling and publishing. EVERYTHING is done on the fly in AS3.0 classes.
When I upgraded everything (Photoshop,InDesign, Illustrator,Dreamweaver, Flash etc... ) to CS5 and recompiled my AS3 code I got the following error. Web Design/GCSSplash/GCSSplash.as, Line 30exception during transcoding: Cannot embed local font 'Letter Gothic Std' as CFF. The CSS @font-face 'local()' syntax is not supported. Please specify a path directly to a font file using the 'url()' syntax. For [Embed] syntax the 'systemFont' attribute is not supported. Please specify a path directly to a font file using the 'source' attribute.
[Code]...
View 2 Replies
Dec 26, 2011
I'm doing a bigger aplication in flash (as2).Image, there is a main "home" flash with several menu buttons.Clicking these buttons, I load external swf into an empty container in this "home" flash.[code]clicking buttons in this second level, will load external movies into an empty container in this SECOND LEVEL swf.This works fine, but now, coming to the THIRD LEVEL (don't think there will be more in the future) problems come up, some scripts won't work.Now (I'm a as2-beginner) I think, loading external swf ALLWAYS into containers in the first "Home" flash should solve the problem.But I don't know, how to load an swf from the third level into a container in the first "home" level.In the "home" level, I have a "close" button, that will unload the container content.I need to go to a certain scene "content_2" in the home swf, too.
View 7 Replies
Mar 28, 2010
I am making a flipping page book in flash and have had to create sections in different movies because it kept crashing when i tried to have all the pages in the same movie. I have 3 movies 'page flip4', 'pageflip4-2', and 'page flip 4-3' . I have used the code below to go (flip bacwards) from 'page flip4-2' to the frame label ''backflip'' in 'page flip4'..This works fine
Code:
on (press) {
loadMovieNum("page flip4.swf", 1);
}
[Code].....
View 0 Replies
