ActionScript 1/2 :: OnLoad Working At _root Level But Not At Mc_target Level?
Aug 26, 2010
I have two layers in my FLA both with empty movie clips as follows:In mc_Empty1, I attach a faded background movieclip as I wait for mc_Empty2 to load a SWF. Once the SWF is loaded into mc_Empty2, I want to remove the faded background movieclip from mc_Empty1. When I load the SWF from the main timeline, the onLoad() function works and removes the faded background from mc_Empty1. However, when I load the SWF from mc_target, the SWF loads, but the onLoad() function does not. Here's my AS2 code:
//Loading SWF from main timeline
mc_Empty1.attachMovie("mcFadedBg", "mc_FadedBg", 1);
mc_Empty2.loadMovie("My.swf");mc_Empty2.onLoad = function():Void{ trace("loaded"); //This works removeMovieClip(mc_Empty1.mc_FadedBg); //This works}
[code]....
I know I'm targeting properly because the SWF loads as it should, but the onLoad() function does not.
View 3 Replies
Similar Posts:
May 12, 2010
Right now I am trying to make a gallery in my site and the set up is
Main SWF(1)
loaded into a movie clip on SWF(1) I have SWF(2)
This SWF(2) has the various thumbnails in a movie clip
The ideal is to load SWF(Photos) of the images into another movie clip in SWF(2)
When running SWF(2) stand alone it works fine with a _root command. But when SWF(2) is running on SWF(1) it doesn't work. And initially I had the movie clips with SWF;s 1&2 having the same name so when the button was pressed SWF(1) loaded SWF(Photos) where SWF(2) was.
Is there a command like _root but only going down 1 level?
View 4 Replies
Sep 30, 2009
I have a swf file ("myfile.swf") which i want to load using preloader.
I referred many tutorials for preloader but problem is I want to load "myfile.swf" at _root level as I have referenced many movieclips in it as for example _root.mc1.mc2
I tried following but may be i am mistaking somewhere...
1) I used preloader in frame 1 and frame 2 and swf content in frame 3 but the file is so huge that the preloading almost starts at around 69% or so
2) I kept preloader in scene 1 and swf content in scene 2. But i cannot see the preloader or i can see at 98% or 99%
3) I used preloader in "pre.swf" and used loadMovie() to load "myfile.swf" at _root. But as i m loading "myfile.swf" at _root so preloader's code is overwritten and so i m not able to see preloader
My "myfile.swf" is very complicated file and so i cannot change all the movieclips which i have referenced as "_root.mc1.mc2".
View 9 Replies
Apr 22, 2011
im trying to create a level select screen so the buttons unlock as you complete a level, so far i have this on each button:
on(release){
if(this.number <= currentItem){
gotoAndPlay(3);
}
}
[Code]...
View 0 Replies
Oct 2, 2010
This is making me a little kooky today. I thought I could defined a library path in PREFERENCES > ACTIONSCRIPT > ACTIONSCRIPT 3.0 SETTINGS then that library would be available to all AS3 FLA files, but that doesn't seem to work for me. If I use the PUBLISH SETTINGS and define the library path everything is fine.
Is there something that I could have done to disable the application level class path functionality? I guess I'm trying avoid having to set the library path for every new FLA I'm making.
View 1 Replies
Mar 4, 2005
I have a very, very simple thing in Flash that just will NOT work in Firefox and it's driving me nuts. On the very first frame of the root, I have the following code:
Code:
this.onLoad = function() {
_root.createTextField("test1_txt", 10000, 0, 0, 300, 100);
test1_txt.text = "WORK!!!";
[Code]....
This works all right but again, it's a hack, and I'd rather avoid using a hack like this.
View 1 Replies
Dec 26, 2011
I'm doing a bigger aplication in flash (as2).Image, there is a main "home" flash with several menu buttons.Clicking these buttons, I load external swf into an empty container in this "home" flash.[code]clicking buttons in this second level, will load external movies into an empty container in this SECOND LEVEL swf.This works fine, but now, coming to the THIRD LEVEL (don't think there will be more in the future) problems come up, some scripts won't work.Now (I'm a as2-beginner) I think, loading external swf ALLWAYS into containers in the first "Home" flash should solve the problem.But I don't know, how to load an swf from the third level into a container in the first "home" level.In the "home" level, I have a "close" button, that will unload the container content.I need to go to a certain scene "content_2" in the home swf, too.
View 7 Replies
May 9, 2004
i have game im doing, and i want it to jump to level 2 upon completing the first level, but the problem is, the level 2 is a seperate swf, i've tried to use
Code:
on (release) {
loadMovie("level2.swf",2)
}
View 3 Replies
Dec 2, 2009
I have called main.swf into a container in index.swf.
myMCL.loadClip("main.swf","container"); is an action on my Index.fla timeline.
I have my navigation on index. (i wanted it to go on main, but the nature of the animation meant it had to go on index)
I need to call "home.swf" into "main.swf" from the navigation button in Index.swf.
When I had the navigation on "main.swf" this was my code to call "home.swf" into the page.
on (release) {
Preloader_mc.gotoAndStop("home");
}
("home") is the label name where the preloader is for home.swf
how to call the preloader for home into main.swf from "INDEX.SWF INSTEAD OF MAIN.SWF"
View 5 Replies
Feb 2, 2010
I have a file1.swf which loads file2.swf into it. Within file2.swf i have a button that when clicked needs to remove file2.swf and load file3.swf into its place.
View 2 Replies
Sep 16, 2004
Is there a way to link to one level below the current level? Instead of saying _root.level1.level2.level3, something like: ../level3 ?
View 4 Replies
Jan 14, 2009
Situation:
- We have a Flash application located on a SAP EP (let's say ep.x.com)
- We have a SAP ABAP Application (Webservices) on a SAP WebAS
server (abap.x.com)
- Clarification: This is not about Flash islands / but a normal Flash application communicating with WebAS ABAP via WebServices
Problem: Due to the changed security policy in Flash 10 this scenario does no longer work.
- A crossdomain policy file on root level cannot be deployed on root level
- The WebServices http/s headers cannot be modified, since the WebServices are generated by the WebAS IDE.
Comment: Technically there is a way to patch a WebAS ABAP,but this is not a practical / acceptable way in a normal SAP WebAS infrastructure.
Conclusion:- The above scenario (Flash from EP content / WebAS ABAP as backend) is a quite normal scenario in the SAP world.
- SAP / Adobe always features the close relationship between their technologies.
Question:- What could we do?
- How does the Visual Composer works around that problem?
View 1 Replies
Nov 5, 2004
I have a movie that's 500x400 px in level 0 and has lots of thumbnails with pictures that I want to open. the thumbnails open a 500x400 px movie above the other but on level 1. the problem is that when the new movie loads on level 1, the thumbnails on level 0 (that are now hidden by the new movie) are still active, and if i click anywere in the movie on level 1, it trigger an action from level 0. Is it possible to load a movie to level 1 that deactivates the movie in level 0 without unloading it?
View 1 Replies
Aug 19, 2010
After I saw the methods in flash.utils package, I decided to make a try:
// inside file Test.as
package com.tests
{
[code].....
View 2 Replies
Aug 23, 2004
Let say A is the main movie and B will be a external swf file that i'm going to load into A movie. The problems is that, some actionscript(AS) in my B movie is not working anymore after i load it into A movie. I believe that the AS in my B movie is not working anymore because it is refer to A as the _root instead of B movie as _root. This can be a common problem. So, i wonder what should i change in the B movie AS in order to make it work in A movie.
View 3 Replies
Aug 17, 2011
how i can refer from a flash "A.swf" on level 0 to a "B.swf" on level 1 with an "gotoAndStop(5). I tried it with:
loadMovieNum("B.swf", 9), gotoAndStop(5);
and other variations. It didn´t work anytime.how it can work?
View 1 Replies
Oct 18, 2004
Is it possible to check the number of movieclips in a level?
View 1 Replies
Feb 18, 2009
I am working on a project and have a print function that basically does a screen grab and prints it out. I load a number of external swfs into levels of the main swf.I want the print button to stay on the top level. Is there a way to define what level a button is on?I want to define the button on level 20. I contemplated loading it in as another external movie clip, but the script won't work if I do that.
View 1 Replies
Feb 4, 2010
I have a two questions regarding XML and AS3. Even though I've been using flash for a few years now I would still consider myself to be at a nOOb level... Question One: Basically I have a website (all in flash) and there's a passworded section for clients to access their own information. Previously I've done this by adding the username and password info into the flash movie itself each and every time I have a new client - which works but is very time consuming (considering the number of clients I'm getting now). Is there a way that I can put all the names and passwords into an xml file, and flash checks it?
Question Two: Up until now, once a client has entered their username and password it takes them to a new .swf that has their info in it. And once again, I've been creating separate swfs for each clients (and again, time consuming). What I would love is after they've entered their username and password it takes them to a different scene or frame (still in the original swf) that has dynamic text fields that load the info from an xml file. I assume that these questions have relatively simple solutions, but I'm not sure how to do it.
View 9 Replies
Feb 4, 2012
My main loads an external swf. Then it creates a bunch of ball movie clips on the stage. I need to reference the content from labeled frames in the external swf. In AS2 all you had to do was use _level.
View 6 Replies
Aug 16, 2004
is there a way to add some code in the first frame of the main movie's timeline that sets certain MC's that i specify into level 1000?
i'm going to be using swap depths for a project but i need certain clips to always remain on top no matter what. the swap depth of the other movies will constantly be raising them by 2 levels, so i figure i'll put the ones i need on top on level 1000 as the others should never reach that high.
i was thinking i'd have to either add an array with the MC's i need moved to level 1000, or make them _global. and set a property to that somehow.
View 3 Replies
Jul 13, 2005
i have a menu, and a content area. when a selection is made on the menu, an external clip is loaded overtop of the content area and does an opening animation. the problem is, when another selection is made from the menu, the animation starts the opening sequence over again.
what i'm looking for, is something that says 'if level x is empty, load this clip and play it from frame y. if something is already loaded in level x, play it from frame z'.
View 1 Replies
Sep 3, 2005
loading var into different swf in different level.
I got the index.html to hold navigation.swf, navigation.swf loads login.swf in level 10 then I got an var coming from the database but login.swf cant receive it (it shows nothing). So I try to use index.html to hold the login.swf then it works, does anyone know why login.swf can't receive the var? If I load into different swf in different leve, does it mean I have to specify the level for the var?
View 1 Replies
Jun 1, 2006
i'm trying to disabled different mcs I have in the same level.
Code:
on (press) {
_parent.selectClip = "p2";
_parent.myFunc();
this.enabled = false
uc.enabled = false
}
when i press this mc with the instant name of "rc", i'll disabled with the code above and it works great.but i have another mc i would like to disable as well which is in the same level of "rc"this other mc has the instant name of "uc" so i tried to do what you see above but only "rc" gets disabled but not "uc" i think i'm getting confuse with _root maybe or _parent...
View 1 Replies
May 24, 2003
just wondering if it is possible to disable a level much like you can disable a button. If it is possible what would be the best way to do that with being able to toggle on and off with a button on another level.
View 6 Replies
May 1, 2007
I am trying to go to a certain frame within level 0. When you are in level 4, for example, and you click the button that takes you back to level 0, I would like to bypass the preloader and initial animation in level 0 and start at frame 3. I would like to think that it's as easy as:
loadmovieNum("main.swf", 0);
_level0.gotoAndPlay(3);
But somehow I'm thinking it's not that easy... Because it didn't work .
View 1 Replies
Jul 30, 2007
basically - using the kirupa xml photo gallery script[URL] - i am trying to simply load the next image on top of the current image and then unload the previous image - just for a smoother transition. instead of the current image unloading then loading the next image.
View 2 Replies
Jan 29, 2008
How do you refer to the level one below the current level . I know _root refers to the bottom level, parent refers to one level above but I don't know what to use for one level below. Otherwise, is there a way to refer to a level by its name?
For my needs, I have a clip portfolio.swf that is loaded into a Base flash file. Within portfolio, is a loaded movie called Gallery.swf. Gallery contains a movieclip called Thumbnails which has buttons to load various image.swf files. Also within Gallery is an empty movieclip called "ContainerMC" which is where image.swf are loaded into when called upon by the thumbnail buttons. From within Thumbnails, I want to be able to refer to that movieclip "ContainerMC" which those selected image.swf files are loaded into. I can't use _root as that will refer to the base flash file. I can't use "this" as that refers to the Gallery file.
View 2 Replies
May 26, 2010
however he only used 1 level.how would it look like if i wanted to have 2 level navigation?
View 1 Replies
Aug 1, 2010
I am trying to use parts of a template for a flash site in my own site.On one of my sites pages I am trying to use a set of buttons and pages. My problem is that the flash buttons & pages from the template are set to the ROOT of the template, but I am putting them on 1 or 2 levels difference on my site.Here is the code for the `release` of the button:
on (release) {
if (_root.link<>num and _root.animation == 0) {
_root.animation = 0;
[code].....
View 2 Replies
