how i would create a mc container with positioning and width and heigth?
var mc = _root.createEmptyMovieClip("photocontainer", 1);
mc._x = 3;
mc._y = 30.5;
mc.width = 440;
mc.height = 345;
I have a root folder that calls a container loading movie-a. The problem is that this movie-a has a red symbol that scrolls from the outside to the inside of the movie. If I loaded the movie-a by itself it wouldn't show the symbol outside but as this is inside a root... well... it shows (see image). Is there a way to set container width-height? I know I can mask it but I don't want to to that because I have other symbols flying around the movie.
View 11 RepliesI know this might seem like such an easy issue and I can't understand why I cant figure it out but none the less I can't and I've just about given up. Here's the issue:
I have a sprite container which is supposed to hold a bunch of thumbnails to videos. I am able to populate the container with all the videos and the whole works but obviously if I add a bunch of videos its going to exceed the size of the flash document so I need to add a UIScrollBar (which I did) now the scrollbars target is set to the container but isnt allowing me to scroll and if im correct this is because the container doesnt have a set height. So Im trying to set the height of this container but the second I try setting the height or even width all my thumbnails I used to be able to see are gone! It's as if the size is being set to 0 when its not I've even tried to set it to a specified size just to test and nothing.
[Code]...
Using Flex 4 AIR, what is the maximum widtha and height I can set for line and the bordercontainer?
bc:borderContainer = new borderContainer();
bc.width = 80000;
bc.height = 80000;
is this how i would create a mc container with positioning and width and height?
var mc = _root.createEmptyMovieClip("photocontainer", 1);
mc._x = 3;
mc._y = 30.5;
mc.width = 440;
mc.height = 345;
I have a container object that i add children to. I want to change the height & width of the container without the children scaling. In this case I draw a rectangle in flash which I'll use as the container object then export for AS.
[Code]...
How can I limit the size of a child container with percentage width/height of 100%?
Example:
<mx:HBox id="container" width="100%" height="100%">
<mx:HBox id="scrollContainer" width="100%" height="100%">
<!-- keep this content limited to the size of "container" -->
[Code]....
Apparently I can get the desired behavior if I change HBox to Canvas but I would still like to know how to accomplish this with a HBox and why it differs from Canvas.
I am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
i want to load external images of different height and width into same height and width.
View 3 Repliesi want to load external images of different height and width into same height and width.
View 0 RepliesI would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 1 RepliesIn a Flex Mobile project I have a simple itemRenderer where I'm trying to create an "bubble" texting effect, similar to ichat or iphone (just so you get what im going for). But if the text is longer than the screen it runs off, rather than just going down a line.
If I set Group thats holding the rectangle(to create the bubble effect) and the label to 100% it works and keeps it from exceeding the list containers bounds, BUT the group is always at 100% and looks bad, I'm trying to keep the "bubble" JUST AROUND the text.
Anyway so, at the top of my itemRenderer I tried specifying:
<s:ItemRenderer xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark" width="100%" height="100%">
And here's my layout I figured since msg_container has a width of 100% I was hoping bubble_lable_group would just not exceed that but...it doesnt...it just runs off. I tried setting a max width but that does not allow you to input percents. And just to say it 1 more time. I know if i set bubble_lable_group width to 100% it works, and keeps it from going off the edge, but then the rectangle "bubble" stretches all the way across and just looks bad.
<s:VGroup id="main_container" horizontalAlign="left" paddingBottom="10" paddingTop="10"
verticalAlign="top" width="100%">
[Code]....
I've created a dynamic text field, and set autoSize to true, so it can grow was tall as necessary. I then want to use the _height value to size a container graphic (speech bubble). Here's the (simplified) code:
[Code]....
Returns 19.6 followed immediately by 35.2. It's as though reading txt._height causes it to recalculate, so it's correct the second time. I also tried the textHeight property, which also seems to get recalculated after _height is accessed. This sequence, for example:
[Code]....
I would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 3 RepliesI am looking at the SimpleButton entirely wrong. Here's what I'm doing (inside of a MovieClip):
[Code]...
the close_btn.width and height remain 0. Am I supposed to just rely on the DisplayObject members of the SimpleButton completely and ignore width/height/x/y or what?
I have an empty container MovieClip in which I put a couple of other MovieClips.These inner MovieClips have the ability to expand (kind of accordeon).Everytime a new item gets added/removed or when an item expands/collapses I check if scrolling is needed by checking container.height.The weird thing is that the result is different depending on which item is expanded. Although all the items (and the expanded sections) have equal height and spacing.
View 12 RepliesIf I have a container, and I set clipContent to true, how do I get the total height of the children inside it? Is there a method for doing this without itinerating through every child and summing the heights?
View 1 Replieswhat is the actual height of a container in Flex without scrollbars? Height and measuredheight seem to tell me what the visual height of a container is, but I want to know that number plus any height that is being 'hidden" below a scrollbar.
View 2 RepliesI am trying to use flowlayout from : [URL] when i implement this layout the height of container/group is not increasing automatically depending upon the elements added. I have given no height to the container/group so that it can take as much height as required but this layout is not giving any height to it.
View 1 RepliesI have a flash banner graphic that I created at 1000px wide by 420px tall. I want this to be fluid and fill the browser width, so that when the browser is rescaled the swf fills the horizontal space. My problem is that there is content below it that needs to touch it, but the height is trying to fill 100% so it is creating vertical space between the flash content and the div below it.
I guess a better way to describe it is that I don't want to define the height I just want the width to be 100%. At 100% height there is unused space so I need to make the height maybe undefined or something smaller then 100%?Also, if you make the browser too small vertically the width will not fill. So I want 100% width regardless of the browser height.
How do I set the width and height of my swf in AS3?
This is my code so far:
package {
import flash.display.Sprite;
public class Game extends Sprite {
}
}
Right now, when loaded it is at some arbitrary default size.
If I can't change the size this way, is there any easy work around that will be consistent?
my .swf goes full screen and changes proportion if it is accessed directly at it's url
[URL]
is it possible to tell how big it currently is? i'd like to reposition some elements accordingly...
I'm trying to change the position of a movieclip I've added to the stage. When I try to access stage.width or stage.height I get 0. I've tried MovieClip(root).stage, DisplayObject(root).stage, root.stage, stage, and simply width and height. All of these are equal to zero.
View 1 RepliesI want to write a shell that creates instances of an app and scales it down for animating. Well, I created my shell class and instanced the app and set scales for x and y and then I traced the height and width because I wasn't sure what they'd be. I thought they'd be based on the stuff on the stage or whatever, but they both came up zero. So I'm not sure how that works, am I supposed to have set those values?
[Code]....
I have an empty movieclip in the stage that holds a backgroundbg._width = Stage.width;bg._height = Stage.height;the background is loaded from XML and works fine since I'm not set the width and heightbut if I set: bg._width = Stage.width and bg._height = Stage.height
View 1 RepliesI have two Canvas A and B, A is the child of B.A can be resized by some user actions like adding some UI components to its base.A is bounded by an other Parent canvas B which should show scolling handles if its child A gets too large.I would like A to have the same width and height of B (or really close) while the calculated width and height of A is smaller than those of B.If w or h of A get larger than those of B then A should grow and B will show scrolling.
View 2 RepliesI am using jPlayer library but i don't know how to set width and height[code]...
View 4 RepliesI'm a student for design and want to build myself a portfolio, showing pictures and being able to jump between fit_to_screen mode to actual_pixel_size mode. The following code is just the beginning.
I've wrote the code mixing some tutorials (sorry, but I didn't find a good way to clean it so it'll be more focused) - I'm a really new about action script.
myFile is a mc waiting for an external parameter run_url - a string contains something like "/projects/illustration/alice_in_wonderland.jpg"
You can see the trace command marked as red. I'd expect it to give me a number of the movie clip's width, yet i get "undefined"
import mx.utils.Delegate;
var streamingID:Number;
var fileLoaded:Boolean;
[Code].....
Is there any possibility to change screen width and height not in Flash ( in Properties ), but in Code [ any AS3 line? ].
View 1 RepliesI was wondering if there was a way to set an air app to fill 100% width and 100% height of the screen?
I know how to do it on the web by setting swf address parameters to 100% and setting stage.scalemode and stage.align
I am using FDT to publish my air package with an ANT build. So it does not use mxml, just my document .as class.