I created the scrolling navigation, akin to [URL] by changing a script that I had. However, I'm stuck now, as all the buttons can move to the left, but not to the right. If it does not make sense, check out the attached swf and fla.
View 2 RepliesI created the scrolling navigation, akin toby changing a script that I had. However, I'm stuck now, as all the buttons can move to the left, but not to the right. If it does not make sense, check out the attached swf and fla.I'm not too good with if else statement and x y property.
View 2 Replieswell i want to make buttons that on rollover move to left, on rollout move back to their initial position, and if clicked, they but stay this time at the final rollover place, and be there until something else is clicked. When something else is clicked, the previous button , returns to its initial place. So i ve got it all figured out except for the freeze and move part when the buttons are clicked. All it does now , is when they are clicked they freeze at the position i want, but i havent got a clue how to update them, after so they start moving back, and reacting on rollover and rollout, when the next button is clicked.
[Code]...
Im making a horizontal thumbnail-scroller. Thumbnails are loaded in to a MovieClip and placed side-by-side with some spacing.When I move the mouse to the far right of the stage, the last thumbnail is to the far right on the stage, and when I move the mouse to the left, the movieClip.x = 0.
I can do this and have a script ready. BUT: If I would like the first thumb to be at 0 when my mouse is 100px from the left side and the last thumb to be to the far right of the screen when my mouse is 100px from the right side, how would I make this happend?I've spent $30 on scripts from activeden and 5 hours on trying to make this happend, but I just CAN'T find the solution..
Code: Select allfunction moveScrollerThumbs(e:Event):void
{
if (mouseY > box.y && mouseY < box.y +box.height)[code]....
I'm creating a menu system, the text buttons should, on rollover, move all buttons to the left (of the button currently rolled over) 100 pixels, in the gap created a sub menu running vertically will appear which will break into a 2nd horizontal submenu etc. I'm still in the early stages, and have hit a stumbling block, I placed a trace (this); cmd in root of the roll over function then again in each segement of the IF/ELSE loop inside that fuction. The trace CMD in the root of the rollover gives me the feed back _level0.btn1 or 2 or what ever button I have rolled over but the ones inside the IF/ELSE loop all say _level0.btn0 regardless of the button I roll over!
[Code]...
I know everyone has wrote this a hundred times, BUT I just can't get it to work
I have a main content area called MC that is very wide Then a mask around the area I want to see of the MC
I have two buttons set up below the mask for LEFT and RIGHT
How to I make those buttons move the main content, and stop when It gets to the end of the masked area so you dont just keep scrolling
ALL I HAVE in my code right now, is attached the left and right buttons---
on(release){
MC._y = (MC._y)-50;
}
is there more to it than that? How do I stop it?
I want to do a web site that is very wide. so i want to put a horizontal menu on the bottom. Lets say i have 5 buttons on my menu and with these buttons i want to move the content left or right. so i could control were i want to be on my website using the buttons that just move the background or content left or right
View 2 Repliesi am doing this: press buttons on screen to move character left or right, "swipe" elsewhere on screen to do other stuff.
This is how i have handled it:
Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
stage.addEventListener(TouchEvent.TOUCH_BEGIN, onTouchBegin);
stage.addEventListener(TouchEvent.TOUCH_END, onTouchEnd);
buttonContainer.addEventListener(TouchEvent.TOUCH_ OVER, tOver);
buttonContainer.addEventListener(TouchEvent.TOUCH_ OUT, tOut);
this works fine, just wondering if anyone has another way to handle it. it seems excessive to have 4 handlers for touch input, but i cant figure out any other way.
TOUCH_OVER and TOUCH_OUT check a switch statement to enable/disable buttons within buttonContainer.
TOUCH_BEGIN and TOUCH_END are used to store points and get a "swipe angle" (only if TOUCH_END is not over a button)
my only problem is i started having glitch's i think becuase so many listeners including: ORIENTATION_CHANGE, KeyboardEvents, Event.DEACTIVATE
this is why i ask if perhaps im missing someway to simplify the touch input listeners
i hav a left right moving thumbnail gallery from xml, i need that on the last image image come on focus from the left side so automatically the left button will be disable or opacity goes 0 anything and same thing from right side also.
View 14 RepliesI have an Image called "PanoramaImage" (which is very long in width). I want this image to move from right to left & from left to right automatically.
I am using flash as3. I am loading this image from the same folder where the .fla file exist. my image to move by using Up & Down arrow keys.
The following is the sample code i found on web.
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE, completeHandler);
loader.load(new URLRequest("panorama.jpg"));
[Code]......
I have an Image called "PanoramaImage" (which is very long in width). I want this image to move from right to left & from left to right automatically.I am using flash as3. I am loading this image from the same folder where the .fla file exist. Right now I have the code which will help my image to move by using Up & Down arrow keys.The following is the sample code i found on web.
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE, completeHandler);
loader.load(new URLRequest("panorama.jpg"));
var content_mc:Sprite = new Sprite();
[code]....
I have a series of thumbnails that should scroll from left to right & right to left when you roll over the movie clip buttons on either side. IT was working in another flash movie, but I moved it to a different flash file and now it's not working. The hit buttons within the movie clip buttons have this action script:
[Code]....
I'm not at all used to working with actionscript but sometime back in time I made a flash demo where I managed to map my left & right arrow keys to navigate to the frames of my choice.
To be able to navigate to specific frames in the timeline by pressing either Left arrow or Right arrow key.
This is the code Im trying to use
if(Key.isDown(Key.RIGHT)){
gotoAndStop(nextFrame);
} else if (Key.isDown(Key.LEFT)){
[Code]....
I've adapated a carousel to work on a flat basis, and its working well. However i wish to add navigation to this that will scroll one image to the left/right when clicked. The problem is this navigation i've added works fine for first few clicks and then stops working due to it never reaching the correct destination... The formula im using is simple enough i just cant see why it fails....
[Code]...
tutorial file for a Javascript Tree like navigation in Flash? I can do that in javascript but dont know how to do that in Flash.
View 1 Replieshow to allow the user to scroll a graphic either right or left. when the user moves the mouse to the left or right side I want the image to move the other way (if mouse is at the right the graphic moves left), but stop when when the user gets in the end of the image.
View 2 RepliesI am making an animation and i would like the user to be able to navigate through it by moving their mouse to the left and right. It is something similar to the fly guy environment [URL] but i want it to only move left and right, and use the mouse not the keyboard.
View 2 RepliesHow to do navigation via flash webpages by scrolling and scroll to exact place by pressing buttons ? this is example of navigation i want to do[url]...
View 4 RepliesHere is the flash file I am referring to: [URL] You can view it online here: [URL] Notice how when the navigation loads in on the left, the WhipSmart logo Goes to the topleft? Well I don't want it to do that. I want that to happen ONLY when a user clicks on a navigation link.
So how it should looks is: The whipsmart logo appears big (as it does), the mid text loads and WhipSmart logo gets a bit smaller (as it does) and THEN it needs to stay like that until a user clicks on a menu item (it doesn't do that now, right now it automatically goes up to the topleft without the user making an action).
[URl].. but I want the mouse move up and down as well instead of being just right to left.
I believe it has something to do with "Z" as well az "X" and "Y"
To be more specific I want to be able to build something like this[URL]..when it comes to navigation,simply to be able to move the screen according to viewer's mouse, up, down, right and left
[Code]...
I want to develop a system in which all the images present in a particular directory gets scrolled from right to left automatically. [URL] for reference My email is [URL]
View 6 Replieshow scroll a movie clip across the stage with actionscript rather than tweening.
Basically I have a simple movie clip that consists of around 12, text only, buttons and I want mutiple instances of the movie clip to scroll left->right across the screen, repeating itself seamlessly. At the moment I am tweening it but the file size has become unmanageable.
My swf is 600px wide, and most of the pictures does not exceed that. However, some of the pictures needs to be presented in a larger width. url... solves the problem in a great way, by scrolling the images to the left automatically. (for example, check the second picture in Knut Bry's portfolio) My problem is that I can't figure out how on earth I'm gonna do that. Can anybody help me? Or maybe point me in the right direction?[code]
View 1 Repliesim looking for this one for a long time now.. but suddenly one of the sites that i look for this kind of tutorials point me to this link[URL].. this site amazed me so much.. lots of complete tutorials. i created one like the above tutorial, and i try to play with the script.. and works fine to me.. but i want to enhance its feature... just a small modification that i cannot do..
How to stop the scrolling if the mouse is out either left or right? It will stop at the point when mouse is rollOut for both left and right scrolls.. or let say when the scrolling will stop when the mouse is away...
I want to make a continuous scrolling image like the one I found here [url]....only thing is i want it to scroll right to left I tryed to change the code
View 3 RepliesI want to develop a system in which all the images present in a particular directory gets scrolled from right to left automatically.
View 6 RepliesI need to move my navigation to top left of the stage, and it is appearing at x:275 y:200...Can someone look at my flash navigation? I try to do it myself but it wont move the entire navigation just some part, do i have to do this manually or their is a easy way of doing this?
View 1 RepliesI'm having some troubles trying to scroll a container MovieClip across the stage.I've attached an EventListener to the stage to track the MOUSE_MOVE MouseEvent, but it scrolls in a weird way (when halfway the screen it shows about 300 px of the container, when going below the horizontal centre, it goes up and disappears from sight.This is my code:
Code:
private function moveHandler(e:MouseEvent):void
{
[code]....
I am programmer , C# is my programming language.I started known about FLASG a few day ago. I am very, very interesting about its.My boss want i make a text display in bottom screen and scrolling from right to left (same as display on TV).But, i used to keyframe to solved this solution but they are slowly and not smooth. Now i want text display running smoother.I not good at Flash .
View 1 RepliesI'm trying to do a photo gallery for a website with scrolling arrows. I found a bit of AS that's perfect for what I want to do only problem is, it's in AS1 and i'm working in AS2 so i was wondering if someone could convert the code to AS2 for me or direct me to a tutorial that has the same sort of outcome in AS2.
[Code]...