i hav a left right moving thumbnail gallery from xml, i need that on the last image image come on focus from the left side so automatically the left button will be disable or opacity goes 0 anything and same thing from right side also.
View 14 Replieslooking to create an image/mc slider that moves form right to left via user clicks of a left and right button.I would assume I would create an array to hold a series of mc's in (my images) and then tell the left and right buttons CLICK events to move linearly through the array (displaying next in line and previous etc.
View 1 RepliesI've adapated a carousel to work on a flat basis, and its working well. However i wish to add navigation to this that will scroll one image to the left/right when clicked. The problem is this navigation i've added works fine for first few clicks and then stops working due to it never reaching the correct destination... The formula im using is simple enough i just cant see why it fails....
[Code]...
I have an Image called "PanoramaImage" (which is very long in width). I want this image to move from right to left & from left to right automatically.
I am using flash as3. I am loading this image from the same folder where the .fla file exist. my image to move by using Up & Down arrow keys.
The following is the sample code i found on web.
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE, completeHandler);
loader.load(new URLRequest("panorama.jpg"));
[Code]......
I have an Image called "PanoramaImage" (which is very long in width). I want this image to move from right to left & from left to right automatically.I am using flash as3. I am loading this image from the same folder where the .fla file exist. Right now I have the code which will help my image to move by using Up & Down arrow keys.The following is the sample code i found on web.
var loader:Loader = new Loader();
loader.contentLoaderInfo.addEventListener(Event.CO MPLETE, completeHandler);
loader.load(new URLRequest("panorama.jpg"));
var content_mc:Sprite = new Sprite();
[code]....
I'm not at all used to working with actionscript but sometime back in time I made a flash demo where I managed to map my left & right arrow keys to navigate to the frames of my choice.
To be able to navigate to specific frames in the timeline by pressing either Left arrow or Right arrow key.
This is the code Im trying to use
if(Key.isDown(Key.RIGHT)){
gotoAndStop(nextFrame);
} else if (Key.isDown(Key.LEFT)){
[Code]....
I have a series of thumbnails that should scroll from left to right & right to left when you roll over the movie clip buttons on either side. IT was working in another flash movie, but I moved it to a different flash file and now it's not working. The hit buttons within the movie clip buttons have this action script:
[Code]....
I've some components with dynamic heights. They have to be aligned with respect to the bottom of my canvas container, so I cannot set the same y for all components.
I could compute their heights and successively set the y but I was wondering if there was an easier way to do it.
tutorial file for a Javascript Tree like navigation in Flash? I can do that in javascript but dont know how to do that in Flash.
View 1 RepliesI created the scrolling navigation, akin to [URL] by changing a script that I had. However, I'm stuck now, as all the buttons can move to the left, but not to the right. If it does not make sense, check out the attached swf and fla.
View 2 RepliesMy vision is to have a colored square at the top of the site Im working on which should span across the entire browser window. I have created a square 1280 x 100 pixels in size and imported it to the stage, alignment is set to x=0, y=0 ad alignment. The scene is the same size as the square I 've imported. When I view my Flash creation its displayed 8 pixels from the top left corner of the browser window. The flash file only contains the square and nothing else. take a look at the 3 files I've attached: issue-scrreen1-3.jpg. The first 2 screens are my Flash, properties and library screen shots. The third screen shot is my browser window.
View 2 RepliesI have a movieclip with the instance name of top. I want the box to grow from right to left, not left to right. Here is my code:
[CODE]...
Here is the flash file I am referring to: [URL] You can view it online here: [URL] Notice how when the navigation loads in on the left, the WhipSmart logo Goes to the topleft? Well I don't want it to do that. I want that to happen ONLY when a user clicks on a navigation link.
So how it should looks is: The whipsmart logo appears big (as it does), the mid text loads and WhipSmart logo gets a bit smaller (as it does) and THEN it needs to stay like that until a user clicks on a menu item (it doesn't do that now, right now it automatically goes up to the topleft without the user making an action).
panning my content from left to right (with stop as intervals) then right to left (also with intervals)
1. I created an mc (name: "content")Notice in this mc, I layout 4 sets of text (like a page) from left to right
2. I created another mc (name: "pancontent_mc")
-I added a layer for "content" and created a motion tween for it to pan from left to right
-I created a mask layer on top of "content" that will show 1 set at a time
-I created an action layer that has total of 4 stops(); on each frame where the 4 sets of text will show directly under the mask.
3. maintimeline -There's only 1 layer. I placed an instance of buttons (left/right) and an instance of "pancontent_mc"
4. actions for right button, works fine and stops on each set of text.
on (release) {
this.pancontent.play();
}
5. actions for left button - none. I havent figured this out yet.
on (release) {
this.pancontent. - something like play previous frame until stop...
}
how to allow the user to scroll a graphic either right or left. when the user moves the mouse to the left or right side I want the image to move the other way (if mouse is at the right the graphic moves left), but stop when when the user gets in the end of the image.
View 2 RepliesIv got a background image 3 times the length of my stage.. what im trying to do is create a scroller so when you press a right button or a left button, it scrolls to the left third or the right third of the image.
[Code]...
in this image orange arrow i want to move left-right. and up-down
View 5 RepliesI want to develop a system in which all the images present in a particular directory gets scrolled from right to left automatically. [URL] for reference My email is [URL]
View 6 RepliesI've been using the great tutorial on Interactive Image Panning - [URL]
Is it possible to make the image pan equally to the left or right? At the moment it move mostly toward the right-hand side, but I'd like it to move left first if the mouse hovers on the left-hand side, for example.
I want to develop a system in which all the images present in a particular directory gets scrolled from right to left automatically.
View 6 RepliesI put an image on my stage. Then I created a keyframe out about 25 frames. I then went to frame 25 and grabed the side of the image and drug it in. Shrinking the image by about 30%. This shrank my image from both sides. When I run it, the image shrinks from the left and the right symmetrically. Now after I did this, I clicked on the tween and said to copy as AS3. Then I went to a new layer and tied the new AS3 code to a new image dynamically. It works fine, except that it shrinks only the right hand side of the image. In other words, the images seems to be anchored on the left hand side. How can I make my dynamic image shrink from both sides in?
View 1 RepliesI put an image on my stage. Then I created a keyframe out about 25 frames. I then went to frame 25 and grabed the side of the image and drug it in. Shrinking the image by about 30%. This shrank my image from both sides. When I run it, the image shrinks from the left and the right symmetrically. Now after I did this, I clicked on the tween and said to copy as AS3. Then I went to a new layer and tied the new AS3 code to a new image dynamically. It works fine, except that it shrinks only the right hand side of the image. In other words, the images seems to be anchored on the left hand side. How can I make my dynamic image shrink from both sides in?
View 8 RepliesI purchased a Flash template and went into edit it in Macromedia Flash CS5.
I imported an image into the library and swapped the image with an image that was in the template I bought. The image I imported into the library is is a little longer and wider than the image I am replacing. Yet it still fits nicely on the page visually.
When I upload the SWF and HTML for the flash site that I just changed the image in, the flash site hugs the left side of the display screen and is not centered. Also the scroll bar on the right is no where to be found.
I then uploaded the original Flash SWf and HTML I bought without changing the image, the flashsite stays centered on the screen and there is a scroll bar on the right. So I decided to make another image the size of the one I was trying to replace in the flash template. I swapped the image out after bringing the new one into the library with import. Still the same problem.
The original template said pre-school and was trying to change to Inspire pre-school with a logo. A picture file that zooms in on the screen.
Here is the live examples.
Original Flash Template: [URL]
Modified Template with Inspire: [URL]
This is the souce code for loading and resizing the images from an xml page. The rectangle is autimatically resizing as per the size of the image. But the problem is, in 800 x 600 resolution with small images the rectagle goes down 'coz it resizing happening in aspect ratio (width and height is proportionally changed). I want to change the height and width only downward direction. Top left corner should be fixed. How to alter this code for that.
Code:
MovieClip.prototype.resizeMe = function(w, h, id) {
var speed = 3;
[code].....
I have a MC, which i would like to act as a button, controlled by AS. So,inside the MC is a simple animation (the button just goes left for ten frames (preferred rollOver action) and then back for another ten (preferred rollOut action).On the MC actions I put:
on (rollOver) {
this.useHandCursor;
this.gotoAndPlay(1);[code].......
What happens is the following: on mouse over the mc goes left, on mouse out the mc goes back to its original place.It works exactly as it is supposed to. Exactly until you try again... if you move the mouse away from the mc (onRollOut), before the animation reaches the end, it goes bezerk.what happens and also how the animation can be done using only AS (with some for loop or function or something and chaning _x property)?
So what I want is the ToggleSwitch on the left and a Button on the right. When the Screen is too small, I want the Button to get smaller and show some "...". So I used:
<s:Group width="100%">
<s:layout>
<s:HorizontalLayout verticalAlign="middle"/>
</s:layout>
[Code].....
Doens't work either. When screen is too small the button is floating over the toggleswitch. So how can I get this to work?
I want to make an interactive image scroller. I am making a webshop and I want a flash to scroll through some of the latest products (3 or 4) that I put in myself and animate or whatever, maybe there's a better and easier way. I want this movie to have these products scrolling from right to left by auto with maybe an ease effect, but when you move your mouse pointer over the whole movie I want it to stop, and when it stops I want two arrows appear on the left and right side of the movie which will be clickable and you will be able to scroll through the products with them as well.
It doesn't need to have an external XML connection where you insert scrolling speed and so on. Of course it would be simplier, but without is fine too. I will try to explain in what terms I know of:
-Mouseout/rollout = 3 or 4 products scrolling one by one from the right and ease in to the middle, pause 4 seconds, then scroll out to the left with an ease. Looped.
-Mouseover/rollover = Movie stops and then you can use arrows on both each side and scroll by yourself. But I don't know if I want this only to be available when the product is in the center of the movie, or else it would be kind of weird if the movie stopped when one product was just about to go half-way out or in.
I have a Flex button. I need one color on the left and another on the right. I don't need it to be a gradient. Just solid colors. Like green on left & red on right. I really don't want to use an image -- just because it'll probably take me a long time to do it.The gradients via Flex Properties in Flex Builder seems to apply only vertically, not horizontally.I also tried to make 2 button, each half width (of original), and putting it into a HBox & really packing them close so they'll look like a single button with 2 colors. It works OK, but I was thinking if there was a better way.
View 3 RepliesI need to create an interactive slideshow where the each image automatically slides to the left every 10 seconds. There should also be the option of clicking a button to move both back and forth as well.
View 1 RepliesHow to distort the dimension of an image like from left side little small and from right large.
View 1 Replies