Am building a site and i have used this code to load different pages:-
on (release) {
loadMovieNum("movie name.swf", 1);
}
when i test the site and click on a link to a new page, it load the new page but over the pervious one, which you can see both of the movies. Is there a way to unload the pervious page so it don't show up underneath?
Am building a site and i have used this code to load different pages..[code]when i test the site and click on a link to a new page, it load the new page but over the pervious one, which you can see both of the movies. Is there a way to unload the pervious page so it don't show up underneath?
View 1 RepliesI have an invisible movie clip I want to go to the NEXT page, as it goes to that page, I want it to essentially remove itself (page1.swf). e.g. page1.swf (contains fancy.swf - [AS2], 4 images, several invisible MCs with code) has an invisible MC + on click = remove page1.swf.
To be clear, this does work. It goes to page2.swf and page2.swf goes to page1.swf as it should. The issue is that if the user repeatedly does this (just 2 or 3 times) the fancy.swf becomes impossible to control and Flash (CS5) crashes. I think this is due to the fact it's not unloading the entire thing, it's only unloading fancy.swf on click (I hope). So underneath page2.swf is page1.swf, and when the user clicks back to page1.swf, page2.swf AND page1.swf are underneath that, and so on and so forth.
[Code]...
I want the current swf to unload and the new one to load only after a transition occurs. Is there a more efficient way to do this than if. switch()?
View 2 RepliesI Have 3 Movies:MAIN.SWF, contains loading movie actions for Nav.swf and Home.swf.NAV.SWF, contains navagation menu loaded on Level 2 in Main HOME.SWF, contains slideshow for home page loaded on Level 1 in Main In NAV.SWF, there is a MOVIE CLIP "graphmc", which contains a BUTTON "graphicbtn", When this button is clicked, I'd like the HOME.SWF (which is loaded into Main.swf on Level 1) to fade out and unload, and load and fade in Graphics.SWF in place of it.
View 6 RepliesI have a site that has multiple video clips on multiple pages. However, once you get a few pages into the site it really bogs down, and I am wondering if it might be that the previous FLV that was playing when you clicked on the button to leave that page, might still be playing in memory or behind the scenes?
I currently have the next page buttons coded with:
Code:
SoundMixer.stopAll();
and the sounds are stopping, but I am wondering if Flash still is using resources to keep the video playing on that frame?
Do I need to unload the video clip, or stop it somehow with the button?
These are external FLV's, NOT embedded in the timeline.
My CPU usage stays between 80-100% and once you click trough a few pages, it really begins to bog down, and stutter, and crash Flash Player.
I am making a flipping page book in flash and have had to create sections in different movies because it kept crashing when i tried to have all the pages in the same movie. I have 3 movies 'page flip4', 'pageflip4-2', and 'page flip 4-3' . I have used the code below to go (flip bacwards) from 'page flip4-2' to the frame label ''backflip'' in 'page flip4'..This works fine
Code:
on (press) {
loadMovieNum("page flip4.swf", 1);
}
[Code].....
I am loading external swf's into a main load.swf, using a Moviecliploader object. What I basically want to do is that, after an external movie, say home.swf, loads another external swf, say about.swf, home.swf should be unloaded.
home.swf is loading about.swf into the _root.mc_holder, which is placed inside load.swf. I want all external files to be placed within this holder. Now this is working with some files, but not with others. My standard code within all files is this:
//code within home.swf to load about.swf
var loader:MovieClipLoader = new MovieClipLoader();var ldrlistener = new Object();loader.addListener(ldrlistener);ldrlistener.onLoadStart =
[Code]......
i want to make an presentation,, for which.. at frame i click a button on frame 9 it goes to frame 10 and plays.. like my script on frame 10 is below
[Code]....
and when i click another button to go frame 1 from the same page at 10,, placed beside the loading external swf ,, it goes,, but the loaded external swf file is not going ,, or the external file not cleaning,, not removing.
I have a button ( 3 buttons ) and each button is assigned to Load a movie. When you click one of the buttons, the LoadMovie on Level 1 is good. Now here is my problem, how will I unload the current movie before Loading the next one. I want to UNLOAD the CURRENT MOVIE first before loading another MOVIE.
View 2 Repliescan I script a buttons to unload a movie clip or swf, then load a different movie?
View 6 RepliesI need to Automate the Page flip where the user has no control. Make it into an animation per say. I know it can be done. But I can't seem to figure out how. I can make just the first page. But I can't make it keep going. You guys know what I'm talking about right?[URL] Here's the code and notes...
[Code]...
Let me ask how to program an html page to move to a new web page on user's clicking an item of an embedded flash movie? But , in detail, I actually want to do a little different thing. I want that the parent html page remains there ,instead I want a child html frame has a new page after user's clicking the list item of the embedded flash movie.
View 2 Repliesim having troubles unloading a swf file that is 2 levels above my main movie.Basically I have a main movie and I have actionscript on the timeline which corresponds to a button which loads a swf (eg my web portfolio work):
digitalbut.onRelease = function() {
disableBtns();
_root.createEmptyMovieClip("container",1);
[code]...
This all works....Then in this swf I have another button which again loads another swf on top to show a particular piece of work and the code on the timeline to correspond to the button is:
Dior_hit.onRelease = function() {
createEmptyMovieClip("container",1);
loadMovie("Digital/Dior/Dior.swf","container");
[code]...
This works also....but I come into problems when I want to create a button in this third swf file which then closes this Dior.swf so you are left with the bottom two still showing. I already have a close button on the Digital.swf which works a charm to get you back to the main movie and the code for this is:
on (release) {
_root.container.unloadMovie()
unloadMovieNum(2);
[code]...
how I can close this third swf to still show the two below?? I have tried so many options but none seem to work!
How can I unload a movie from with in the UI Loader. I have loaded a movie into my UI Loader and there is a go back button And I simply want to unload that movie and return to normal.
View 2 RepliesI am again trying to figure something out. I have to load an experimental interface into my website for my class and I can load it using
[Code]...
However, I can not make it unload without closing both swf's. I use on (release) {
[Code]...
I have a main SWF that loads in an external SWF(2) which has a button that when clicked loads in another external SWF(3). (we'll call them SWF 2 and 3) what I was finding was when I clicked the button on the external SWF (2), when SWF (3) loaded in the contents of the main SWF and SWF (2) were still visible . However I managed to remove the contents of SWF(2) by doing unload movie easily as they run on the same timeline...the problem is I don't know how to unload movie on the main SWF when SWF(3) is being fired because it doesn't run on the same timeline as the main SWF. Surely it is somehow accessible since it is visible in the background ...even if they aren't on the same timeline? how would i get the movie to unload in the main SWF?
View 19 RepliesHow can I unload a movie from with in the UI Loader.
I have loaded a movie into my UI Loader and there is a go back button And I simply want to unload that movie and return to normal.
I have an index.swf that loads the following movies.
loadMovieNum("home.swf", 4);
loadMovieNum("home_2.swf", 53);
loadMovieNum("help.swf", 50);
loadMovieNum("glossary.swf", 26);
loadMovieNum("Resources.swf", 27);
Is there a way to unload the home_2.swf from the index page when a button is clicked on the home.swf?
Home_2.swf is sort of a splash animation that plays over the navigation panel and then sits on the side so when any of the nav buttons are clicked on in level 4 .swf I want the level 53 .swf to unload.
im using addChild to load a movieclip after a button click. It loads to the middle of the movie clip where there's a stop action and a close button, whick jumps to the next frame to play out the movie clip, but then it just starts over.
View 2 RepliesI don't dev in Flash too much anymore, and I'm not up on AS3. Therefore, I developed this little project in AS2 (CS5.5) and seems that I've opened a can of worms.
I've got a launcher movie on _level1 that loads movies onto _level2 based on the button that is clicked. That all works well and good, but I can't figure out how to unload the movie when it finishes playing, so as to return to the menu.
Some of the FLVs that are being loaded were too big to add to a timeline. So I had to use FLVPlayback to load the FLVs into my level 2 movie. I don't know how to tell FLVPlayback to close its SWF when playback has finished.
can a loaded movie unload itself, ive tried but nothing positive this is the thing, i have a sectiion tha i loaded, and i want a close button in that loaded movie, not in the actual main movie
View 3 RepliesI wonder why the following code doesnt work using _level1.unloadMovie() nor even unloadMovie(_level1);[code]
I could be doing something wrong but I cud not figure it out so I created an empty movie clip on the level where I want to remove the movie.
My flash movie has two scenes at end of scene 2 i have load another movie using loadmovie. Now I wanna unload the loaded movie and directly go to scene 2 . Is there anyway by which I can directly jump to scne 2 instead of going through scene 1. I am using flash 5 and both moovies have same dimensions.
View 9 RepliesI have xml which is loaded in a movie clip but i can't seem to be able to unload that movie clip when i need to. I tried everything and the code seems right. I'm guessing it's because of some kinda path issue. Maybe someone else might see something i'm missing.
This is the code i am using to load the xml in the movie clip:
Code:
var r = _root;
r.clipArr = new Array();
r.menuXml = new XML();
[Code].....
Here is the file that i am working on. Just download it from my server and take a look:
[URL]
i have this menu, that has the general actionscripting on the button, but the characteristics are in the xml file... color, and file name..
in the main movie, the button's actionscript i have:
ActionScript Code:
// On press goes to the link setted in the xml
area.onPress=function(){
[Code]....
what do i do to unload the movies each time another is loaded?
Is there a way to automatically unload movies when a new movie is loaded? eg: 5 buttons, 5 bit of art. At the moment they overlap instead of unloading before the new one loads.
View 4 RepliesI'm using CS3 with Action Script 2.
I have a button that loads an outside .swf into a blank container. That works fine, however, I want to use the same button to unload that movie. Basically I want it to work as a toggle button.
it seems some browsers will not unload the background movie?
on (release) {
getURL (clickTAG, "_blank");
}
on (rollOver) {
background3.loadMovie("http://someaddress.com/background4.swf");
}
on (rollOut) {
background3.unloadMovie("http://someaddress.com/background4.swf");
}
PS I know and apologize for the dumb question- it's just that I only use flash for some occasional banners and am not too familiar with AS.
This is my script:
[Code]...
Basically it loads a mc when the web starts and when i press buttns it unloads previous mc and loads a next one BUT, it gives me an error when i press the gigs buttn, when contact clip was not loaded before How can i tell that IF certain MC exists, then unload it and load next one, and if not, just unload the other one. Or is there other way to do it? Here is the error i get:
[Code]...
