i went through the tutorial for the actionscript text effect... and i got it to work... but now i want to put it into a project as a movie clip, so it loops, but i can move it freely as an object... but when i put the whole thing into a movie clip, it only does the letter in the text box that i animated, and it only runs once...
View 2 Replies
CS3 Flash - Complete newbie to Flash and I'm trying to change an existing flash piece.It consists of 4 different text statements that appear on a Black background - the first appears and stays on-screen for 10 secs, then it starts to blur and fade away in about a sec, and then the next statement appears, etc, etc., and the whole lot loops.The 4 statements appear as Video Clips (Symbols?) in the library.I need to add a new statement, which means there will be 5 statements. I duplicated one of the library items and renamed it, which seems to have worked fine... but I cannot then work out how I insert that video clip into the Timeline and still have the same visual effects and timing as the existing ones? I can insert a blank frame, but then I can only drop the new video clip text onto that one frame.I've tried copying and pasting a whole set of frames, and then go in and change the text. Which I thought had worked, but then discovered that it also changed the original frames.... now understand that's because they are just instances and any change will affect the master Video Clip!
So can anyone advise if I can insert my newly added and renamed video clip into the timeframe and create the same effect as the others?Please keep any advice as idiot-proof as possible as this is my first venture into Flash... not finding it as intuitive as I hoped, spent 6hrs to date just trying trial and error without any real success.
I want to be able to make a movie clip (that acts as a button) so the roll over effect finishes before the roll off effect is triggered. Like if a marker circles a button, i want the circling animation to stop before the roll off effects happens. Anyone know how to do this.
View 2 RepliesI'm trying to set a special roll over effect for a movie clip i created. all i need to do is this: when i roll over, it should play from frame 2 and stop where i told him (at frame 5) when i roll out i want him to play from frame 6 and stop where i told him again. (at frame 10). i already did this with no problem except this: my movie clip has a very complex animation i created with other movie clips who works frame by frame style (actual animation). the problem is this: when i roll out after a short time (about half a second) the flash jumps to the rollout part of the movie clip and shows the rollout animation but doesn't finish the rollover animation, what makes the animation to jump (the animations i use is a bit long).
so i'm trying to see if anybody can explain to me how do i make this jump get out of my flash animation. what i mean is this : if i rollover the mouse and stays on the movie clip, the rollover animation is played and when i rollout out of the movie clip the animation continues as usual (this is something i already accomplished). but i want to make this a bit more complex : when i rollover and than right away roll out of the movie clip i want the flash to play the roll over animation and right after that the rollout animation without stopping .... ' i hope i made myself clear with this problem .... for some of you it may seem easy (using some action script tricks or something) but I'm only a beginner who's trying to figure it out ....
I'm not sure if this is being done through AS 2 or 3, or without code altogether. But, can anyone tell me how to create the rollover effect seen on this site (left hand side menu)?:[URL] I'm working in AS2, as I am not very familiar with AS3. I was thinking the effect might be created with a mask or some kind, but really not sure.
View 0 Repliesim trying to create a button that roles over with the user places the cursor on it the actual object "PhotoshopOver" is in the movieclip "Gallery:
[Code]...
I'm looking to create a simple effect using AS2. I need to create a rollover effect on a movie clip that would in turn blur out of focus everything else behind it (Not selected).
Let me know if this does not make sense. I'm looking for guidance on how to achieve this effect optimally.
I've imported 9 .mov files in my flash presentation. Each lasts for about a minute, and the language is english. I have translation of each video clip in Serbian language as .txt files. And now i need that text to go below the movie clip simultaneosly with the voice in movie clip. And for example when i press pause,the text stops,and when i resume it,the text goes again.
View 1 RepliesWhenever someone clicks on a nav button, the corresponding .swf file loads into a blank movie clip I have on my home page. What I'd like to do is have the content on the current page fade out before the content on the new page fades in. I've used Flash for years, but this is the first web site I've built entirely in Flash, and I don't quite know how to approach this. I'm assuming ActionScript would be the easiest and most efficient way to produce this effect, but I don't know how to go about doing it. Is there a way to tell the current movie to go to a certain frame in the movie and play it before loading the next external movie clip?
View 5 RepliesI have done the research a lot but failed I need to give the effect in flash like this any one know how to do that please send me any hint or peace of code so i will get
View 3 RepliesThe problem is that every snowflake is created over everything else on the stage and I need to hide all snowflakes for some frames to make transmission between two scenes.Transmission is transparent black rectangle over the scene and alpha is slowly going to 100%... but the snowflakes are visible over the black rectangle - how to remove them all ?
View 1 Replieshow to make a movie clip have an elastic type effect on it when you can click and drag it and it snaps back into place in a springy type way. Also would like to have a maximum that it will allow you to drag it before it will snap back on its own.I've been Googling for 2 days looking for an answer and have had no luck yet.
View 3 RepliesI'm using this complex rollover button on my site i found here --> [URL] What i'm looking to do is have this effect trigered when a second button is rolled over as well. Is there a way to target this movie clip effect from the _root timeline? I was able to achieve this halfway by using labels but I am not able to reverse the animation on roll out with this method.
View 2 RepliesI'm trying to create a "motion blur" effect on a movie clip that contains a child clip/ sprite whose child clips/ sprite contain bitmap data using this function
[Code]....
i have a dynamic text field that loads a variable into it (just a simple text file). this text file will be updated on occasion. i also have a movie clip to be positioned below the text field, however i want the movie clip to change position depending on how much text is in the text field so there isnt a large gap and so they dont overlap. is this possible? i tried the following actionscript to adjust the size of the text field depending on the amount of text. textField2.autosize = "center"; however i have no idea how to get the y position of the movie clip to adjust accordingly.
View 10 RepliesI really like the text effect Pom used in the footer contest, and would like to use the same grid-type method of creating mc letters but with a different effect. i understand how to change the parameters and shapes of the letters, but can't seem to figure out which piece of code is purely for the explosion effect. basically, i want the letters but with the 'Repel' effect from[URL] here is Pom's AS:
[AS]
cellSize=3;
radius=10;
damp=.85;
[code]....
and here is the .fla using the repel effect using pre-made mc:
Hi, I'm making a simple target shooting game in Flash CS3, and need to know how to make it so when you click on a movie clip, it adds 1 to a dynamic text box reading 00.
View 1 Replieseveryone seems to have problems with LoadVars() (porting text from a server-side to FLASH). I've managed to get that working. HOWEVER, even though the text shows up fine in the SWF, I want to be able to do some sort of tween to it (example: give it an _ALPHA of 0 and then bust it up to 100 when i want it to). In the attached .FLA, there are two boxes: one is the MOVIE CLIP (a text box under) and the other is a text box. the text box outputs fine, but the MOVIE CLIP doesn't do anything.
Here's the code (actionscript):
Code:
myData = new LoadVars();
myData.onLoad = function()
{
[code]....
Is it possible to have a textField in a movieClip in vertical position and after you click on that movieClip the text to go in horizontal position? If it is possible, how can be done? Because I have made some search on the web and nothing.
View 12 Repliesi have a dynamic text which loads data from external file what i want is that based on what i click in the dynamic text the corresponding image should be displayed from the folder in the movie clip loader. e.g say dynamic text file has ball,bat,bird,sun these should be listed in the dynamic text area and when say i click ball, the movie clip loader should display the the image of ball from the folder.
View 8 RepliesI am trying to load text that someone enters on the main timeline into a dynamic text field embedded in a movie clip.
variable name of the input text is "EmailName"
instance name of the dynamic text within the movie clip is named "txtEmailName" it's variable name is "EmailName"
I need to Enter text to movie clip frame, by clicking into "input Text" box .
[URL]
i'm trying to replace text in a dynamic text field within a movie clip, and it seems as if it's treating it like static text.
theBtn1.addEventListener(MouseEvent.CLICK, adjustText1);theBtn2.addEventListener(MouseEvent.CLICK, adjustText2);function adjustText1(e:MouseEvent):void{ textField1.text = "Foo"; // this works}function adjustText2(e:MouseEvent):void{ theMC.getChildByName("textField2").text = "Bar"; // this doesn't}
It throws this error:
1119: Access of possibly undefined property text through a reference with static type flash.display:DisplayObject.
I'm having an issue with some clickalbe movie clips that are dynamically being placed on the stage with dynamic TLF text boxes being placed in them. The TLF text boxes seem to be blocking the event listener attached to its parent movie clip. If I leave out the TLF text the event will trigger.
public function set myText(_txt:String):void
{
_myText = _txt.toUpperCase();
[code]....
i'm trying to replace text in a dynamic text field within a movie clip, and it seems as if it's treating it like static text. Is there a way around this?
theBtn1.addEventListener(MouseEvent.CLICK, adjustText1);theBtn2.addEventListener(MouseEvent.CLICK, adjustText2);function adjustText1(e:MouseEvent):void{ textField1.text = "Foo"; // this works}function
[code]......
i want to load a random movie clip then.. as i load a movie clip.. the text from each movie clip should also be randomize.
View 1 Repliesso i have a this movie clip, inside the movie clip i am dynamically loading images into little movie clips and i wanna dynamically load text into text fields in the clip as well.currently i am using this code to load the text into the fields, but it's not working.
loadText = new LoadVars();
loadText.load("../images/news.txt");
loadText.onLoad = function() {
[code]....
I can show text in a dynamic text field on my main stage...
But when i put the text field in a movie on the main stage, nada!
On my button i have this actionscript:
Code:
on(RollOver)
{ _root.mc-01.letter.text = "b"; }
My movie clip has instance name of "mc-01", my text field has instance name of "letter".
I can see the textfield in the debugger and i can point to it using the targetter...
But i get actionscript error when my movie runs:
Code:
**Error** Scene=Scene 1, layer=main, frame=1:Line 2:
Left side of assignment operator must be variable or property.
I am trying to get the text to display on this buttonn which is actualy a movie clip I want the text to load from a text file so each button has a varible name button1 button2I have this on the first frameloadVariablesNum("text.txt", 0);and then in the text file I havebutton1=Ops&button2=Toolsif i put a text box over the button it will display fine but the button looses its function near the text box as i have put the text box in a layer above the button
View 3 RepliesI'm fetching data from XML to dynamic text in mc symbol done through using button. I want a click of button, dynamic text in mc will change when it load up scene 2.I used this code on button to change my dynamic text in mc on single scene, and it works fine.
Code:
on (release) {
var english2 = new XML();
english2.ignoreWhite = true;
[code]....
But this don't work when i have a dynamic text mc symbol on other scene.
