I'm having an issue with some clickalbe movie clips that are dynamically being placed on the stage with dynamic TLF text boxes being placed in them. The TLF text boxes seem to be blocking the event listener attached to its parent movie clip. If I leave out the TLF text the event will trigger.
public function set myText(_txt:String):void
{
_myText = _txt.toUpperCase();
[code]....
Can someone tell me why the last letter of text in some of my movie clip buttons is chopped off? Take a look at the URL below and click on the Demos button...you will see "promo" and "narration" are slightly chopped off. When I go into the movie clip there in nothing wrong and the mask I am using is plenty big enough - the whole line of text should be showing.url...
View 4 RepliesWhy the last letter of text in some of my movie clip buttons is chopped off? Take a look at the URL below and click on the Demos button...you will see "promo" and "narration" are slightly chopped off. When I go into the movie clip there in nothing wrong and the mask I am using is plenty big enough - the whole line of text should be showing.[url]...
View 2 Replieshere is my issue, so i have a main page with a slideOut movieclip which basically is a movie clip button and the "over" state sends a tray out of the movie clip with info and anothe rmovie clip button. i cant seem to get that movie clip button to root.gotoAndPlay("frameLabel");i have the actionscript on the same frame as the movie clip i need to act as a button. but it just doesnt seem to react to it.i have tried going to the main timeline and doing
blank_mc.blank2_mc.onRelease = function();
{
_root.gotoAndPlay("frameLabel");
[code]....
I am trying to place buttons inside a movie clip to control the timeline of the same movie clip. This does not seam to work like buttons on the main timeline. When I play the movie the cursor does not turn into a hand and the rolloever affects only sort of work. I have read about controling the movie clip with buttons on the main timeline, but I need one of the buttons to change halfway through the movieclip. I want to be able to jump to interior shots while in the exterior section and vice versa. It would seem that button would work the same way inside a movie clip as they do on the main timeline, but that does not appear to be the case. I am using CS3. Action scrip 2.0 is selected, but I could change it to 3.0 if it would make a difference.
View 6 RepliesI have a movie clip with 15 frames. Each frame has buttons on it (mc's)... I was going to put the actions on the main timeline/stage and navigate within the MC from the main timeline. Is that possible? I can get the buttons on the first frame of the MC to work, but I can't seem to figure out how to target/make the buttons on the other frames work? I was thinking I could identify the path of the MC with the frame labels, but that doesn't seem to work. like: _root.RMChanger.(frame label).buttonOnFrame = function
I have to move a text box in and out over the MC backgrounds on the main stage... which is why I was thinking to do it this way? I've been switching back and forth bwtween AS2.0 and 3.0
I am creating a navigation bar in Flash (which will then be used in Dreamweaver). When you mouse over each topic in menu (ex. Products), i want it play a movie clip (so it shoots out a sub-menu underneath). so far so good, but the only thing is, the sub-menu won't stay open in order for me to click on buttons in it. For each button, I assigned it the Behavior to go to a url. Also, I tested the buttons within the mc and they don't seem to direct me to url. do you think maybe it's because it's nested within the movie clip?? Is there an easier way to go about this?
[Code]....
I used the Kirupa Tutorial for Advanced Rollovers to create my navigation menu and within one of the movie clips I have additional buttons that show up on the roll over.I know that you need to place the onPress code on the frame that the buttons actually live. I have a trace("mix_btn: "+mix_btn); to find out if the button is being found.
My problem is that I dont know how to get the code below to actually dynamically load and external SWF into a container on the main timeline. A friend of mine suggested a MovieClipLoader or onLoadInit Handler but I have no idea how to use those. (I'm a noob and proud of it!). (this is my latest version of a onPress.)
Code:
mix_btn.onRelease = function() {
_root.createEmptyMovieClip("container", getNextHighestDepth())
loadMovie("musicMixes.swf", container);
[code]....
I've imported 9 .mov files in my flash presentation. Each lasts for about a minute, and the language is english. I have translation of each video clip in Serbian language as .txt files. And now i need that text to go below the movie clip simultaneosly with the voice in movie clip. And for example when i press pause,the text stops,and when i resume it,the text goes again.
View 1 RepliesI'm trying to get buttons to redirect the user to another part of my site. However, the button is in a movieclip and won't work. URL..I've been trying to get it working for ages and it just won't work. I've even made other buttons (as you can see on the site), and they work!
View 1 RepliesI have a movie clip & inside that movie clip, some Images are moving around the stage. I want these images to act like buttons, so that when we click on them we can go to URL link. First I stopped my movie clip on mouse rollover, which is working fine & for buttons I converted these images to movie clip ( yahoo_mc) & gave action Script
on (release){
getURL("http://www.yahoo.com ", "_parent");
}
[code]...
I imported the .MOV clip (a 3D rotation) into the library, and I would like to be able to control where the rotation stops, by use of a slider or clicking a button
View 4 RepliesI'm trying to put buttons on an intro movieclip for a game and I keep getting errors saying they are undefined like this: 1120: Access of undefined property.
View 4 RepliesI have 3 layes in my file, the first one has a movie clip, the 2nd has few buttons and the third has the background image. When i rollOver the first layer with the movie clip, it zoom the entire movie. if i rollOut then it zoom out. the problem is that the buttons behind this movie clip don't work. They are placed in the layer under the first layer with the movie clip. Is there any way to make these 2 layers work, the movie clip and the Buttons? The layer with the movie clip need to be at the top. I am working with AS3. if you have any idea please let me know.
View 2 Repliesusing AS2, I need buttons inside a movie clip to jump to a particular frame in the scene.I've got the obvious:
on (press) {
gotoAndPlay(15);
}
I just don't know how to tell it to affect the scene and not the movie clip.
I have created several buttons using movie clips with animations and the 'rewind=true'method when someone mouses off. What I am wondering is, if I have 2 buttons on the stage and I want to animate both of them if one or the other is moused over at the same time, how can this be accomplished
View 1 RepliesI'd like to know if it's possible to have several buttons in a single movieclip that can interact with things outside of that movieclip? An earlier test failed due their instance names not being found, I'd like to think it were possible though.
My reason for asking is that I'd like to control the visibility/position of a large group of buttons simultaneously via AS3 while keeping to a single frame.
script that would allow the user to clikc and drag mulitple symbols- similar to this:
on (press) { startDrag (this._parent, false);}
on (release) { stopDrag ()}Only that instead of using "this", it drags the following symbols on mouse click:
background (a movie clip)[code]..............
I have a screen with transparency that pops up over a movieclip full of buttons.I need to disable the movie clip and/or buttons so they don't function when the pop up comes up.Can't get it to work with this code:
myMC._enabled=false;
or
myMC.myBTN._enabled=false;
[code].....
Having a bit of a problem with a project. At the moment I have a draggable map which is a movieclip, within the movieclip I have added a range of icons for hotels, restaurants, etc.I am having a problem linking these icons so that they will take you to the correct point on my main timeline. I've converted the icons to buttons and added the script below, but it doesn't seem to be picking up that the icon is a button. I think it may have something to do with it having a start/stop drag on it.
View 4 RepliesI have some buttons, and above them a movie clip with a 20% transparency which I use for some graphic effects in my page. But the buttons can't be accessed (they are not working) because the layer covers them.I have used the following code to disable the graphic layer:overlay_mc.buttonMode = false;overlay_mc.enabled = false;overlay_mc.mouseEnabled = false;but none of these solves the problem. The buttons are still covered and inactive.
View 3 RepliesI am building a website in flash for a design class (emphasis on design, nothing taught with actionscript)
I need help trying to figure out the actionscript for allowing buttons inside a movie clip symbol to navigate pages at the parent/root/main timeline level.
With this site I have the mainMenu as a Movie Clip symbol and have the menu items populate with animation inside the movie clip. I need these buttons when pressed to navigate to different parts of the site that are controlled on the main level of the site (outside of the movie clip the buttons reside in).
I have given the buttons instance names, btnDining in the movie clip symbol. The movie clip symbol is call mainMenu. In the main level, I have labels for the different states/pages I want the website to have (dining, accommodations, etc)
[Code]...
I don't know if it is best to run the code from inside the movie clip symbol and call the different view on the main stage/level of the flash or if I try to run from the main stage/level and reference the buttons inside the movie clip symbol.
Please help me figure this out, I am trying to go a little above and beyond on this project. I have been struggling on this for days and I have looked at tutorials, books I have on actionscript, etc.
I need to create an application where a number of buttons keep scrolling horizontally. For that I created a movie clip. In that I create a number of buttons. They scroll on click of a button. My problem is I changed the color of the button in the over state. But while testing the movie, the button color is not changing. I thought that the problem was due to the fact that the buttons are in the movie clip.
View 1 Repliesbasically, i have made my web pages, and converted them into Movie Clips,i load them via actionscript 3.the problem i am gettin is that how do i make the buttons active inside the different pages ( movieclips )... the buttons are not made from buttons, but they are also made from movie clips.i can make the menu bar work fine, to load each page, but cannot get the movieclips(buttons) to become active inside another movie clip.
View 2 Replieshow do I make a movie clip button?
View 1 RepliesUsing Action Script 3.0 I have followed a you tube movie on how to make simple drop down menu buttons. Everything works bar the drop down buttons, which do not indicate anything on rollover or mouse click?[code]...
View 1 RepliesIm just learning AS3 and am having some problems finding the answers to what I need so im trying here. I have two movie clips on my stage.
movie clip #1 (instance name "menu_mc") has a button inside it with the instance name of "btn1_mc" and the following code (what i have as of right now...need click function) on frame 1:
[Code]...
I have a movie clip on the main timeline which is acting as a button, in the over state of that mc button are 3 regular buttons, which appear on mouseover the mc button, but do not hilite, and will not respond to a trace.
View 3 RepliesMy question is probably very simple, all I am trying to do is control "myMovie_mc".I have created four buttons "up_btn", "down_btn" etc.I can get the movie clip to move each time I rollover a button.How do I get continuous movement when I keep my cursor over a button?
View 2 RepliesFallen into another pit of actionscript. This is what I have done. I have created a dynamic text box and called is scroller, and then created another and called that scroller1.I have created some buttons on the same layer that have this code in them
Code:
on (release) {
loadText = new LoadVars();
[code]....