ActionScript 2.0 :: Swap 2 Dynamically Loaded MovieClip?
Feb 5, 2009
I put 2 container named mcContiner1, and mcContainer2
And
var mcImg1:MovieClip;
var mcImg2:MovieClip;
[code]....
I want to swap these 2 images, that is I want mcImg1 can be displayed in mcContainer2, and mcImg2 can be displayed in mcContainer1, of course the easiest way is I load these 2 picture again, but of course, it's not the answer I expected, also, we can move the movie clip to make the change, I still think it's not the best method, because it will make program too complex.
View 9 Replies
Similar Posts:
Oct 16, 2011
what I'm trying to do is accessingsnapText = scrollPane.source.textSnapshot;from an external swf. I've tried:
trace("-->: "+scrollPane.source.textSnapshot.getText(0, 1000));
trace("-->: "+myLoader.content.textSnapshot.getText(0, 1000));
trace("-->: "+mc.textSnapshot.getText(0, 1000));
[code].....
View 3 Replies
Nov 15, 2004
know how I can resize the stage to match the size of an external graphic/movieclip which is loaded into an empty movieclip,
View 3 Replies
Nov 18, 2009
After trying to no avail to get the totalframes of a dynamically loaded .swf in AS3 I've regressed to AS2.
Now I can add the clip and get the totalframes of the content, no problem.
THe problem is I cannot resize the content at all.I have no idea how to target the loaded content.
Here's the code I'm using:
var myXML:XML = new XML();
var path:String;
[Code]....
I need to resize the content both for the main holder_mc as well as for the menu elements.
View 5 Replies
Feb 17, 2010
I have a flash movie with a button (referencesBut_bt) that, when clicked, loads a movieClip onto the stage. What I'd like to do is have a button inside the just loaded movieClip that unloads itself when clicked (removeChild). I think the problem I'm having is in targeting the loaded clip. Does anyone know how I would tell a movieClip to remove itself from the stage when a button is clicked from within the same movieClip? The code i have is below:
//------- set up movieClip for export
var references_mc:mcReferences = new mcReferences();
//------ event listener and func for referencesBut_bt
[code]......
View 18 Replies
Jun 9, 2009
I am using Flash CS3 and ActionScript 3.0.I think there is someone who spends 2 minutes of your valuable time in providing solution for my problem or issue.
My description for my problem(with layer numbers/names) starts from here: Layer-1: I am loading an external image(.jpeg) onto the stage dynamically when "Submit" button(which is created & placed in Layer1) is clicked using the following sample code:
[code]...
The jpeg image is loaded perfectly and works fine.
Layer-2:When I click on this loaded image, a Pop-up must be visible. So, I created Pop-up in Layer2, which is nothing but a MovieClip(with instance-name myPopup), is a rectangular box with light-yellow colored background, which makes us to feel like a pop-up). So, I created this Pop-up in a layer named "Pop-up". My requirement is : Whenever I click on the image loaded, I need to view the Pop-up upon this loaded image near to the pixel-position where CLICK_Event has occured.To view an example of my requirement,just go through the following [url]Once you open the above url, then you right-click on the right-side image(which is a geographical map). You can view a Pop-up with some of the items(viz., Directions from here, Directions to here, Zoom in, Zoom out & Center map here)
Layer-3:In the same way, in my application ,I want to display few hyperlinks on this pop-up. So, I had created TextFields on the stage(which are hyperlinks) using "Text Tool from ToolsBox" in Layer3 named as "TextFields". I am accessing these TextFields using
<TextField-instance>.htmlText to make it a hyperlink.So, here my problem is: After loading of the jpeg image, When I try to click on the image, the Pop-up(MovieClip) and "Submit" button appears to be under the loaded image and the TextFields are visible over the loaded image.Hence textfields/hyperlinks visibility works fine i.e., on the loaded image as hyperlinks.
Now, What I should do in order to make the MovieClip(Pop-up) and "Submit" button visible on the loaded image?
View 4 Replies
Apr 6, 2011
I have a heck of time here with an issue. I have an xml document that when a certain button on the stage is clicked it loads it's corresponding external swf into an empty movieclip on the stage. This empty movie clip is a holder for all external swfs.So what I'm trying to do is when an external swf is loaded that has buttons on it, I need those buttons to communicate with the main timeline and remove a mc that is on the Stage. I need the currently loaded swf(s) to be able to do this.So whatever the currently loaded external swf is that's loaded, I need it to talk to the main timeline. (I have quite a few external swfs that need to do this) So I imagine I need to somehow target the currently loaded external swf to get it to talk to the main timeline.The code below in summary doesn't work but it doesn't give errors either. I don't pretend to know what I'm doing and I haven't been successful in searching for a solution to this particular issue.
// main timeline object
var index:Object=this;
function loadComplete (e:Event) {
[code].....
View 3 Replies
Dec 10, 2011
I wonder whether anyone could give me an idea of where I am going wrong with this.I am loading images into a sliding menu which will act as a thumbnail viewer, the structure of which is: "thumbsContainer" (movieclip) nested inside "galleryPane" (movieclip). The images are loaded into movieclips named "all_thumbs", which are added to the thumbsContainer stage.
I would like to mask the content of the thumbsContainer, so that only the images physically within the thumbsContainer border will be viewable. I have tried adding my coded mask to the thumbsContainer stage, and tying it to the thumbsContainer; and have separately tried the same with the all_thumbs movieclip - but no matter how I organise my code, I can't get this to work. If the mask is tied to the thumbsContainer mc - that element disappears; if the mask is tied to the all_thumbs mc, only the background to the thumbsContainer is visible. Either way, I cannot get thumbnails to display through the mask. No thumbnails at all will display on stage.
I've had a good look through the books I have and online, but with no joy so far.
I'd be really grateful if someone could give me a steer with this.
[Code]...
View 6 Replies
Apr 24, 2010
My movieclip clipArt_mc receives movieclips that are loaded dynamically from a listbox selection using:
[Code]....
I would like to access the nested or loaded in movieclip inside of clipArt_mc that has in it a movieclip named color_mc so that I can apply color directly to it instead of clipArt_mc.
View 1 Replies
Jul 28, 2010
Im having trouble stopping or starting loaded swf files. I need to dynamically load the swf file but make sure it doesn�t play until the user requests it. The trouble is I wont know anything about the loading swf file (for example frame labels, if it has a 'stop' script in the first frame etc.) Ive attached a simplified version which I think illustrates the problem but the code is:
[Code]...
View 2 Replies
Apr 16, 2007
I'm having trouble figuring out how to create onRollover handlers for movieclips loaded with loadClip. I can attach event handlers to the container clip, but not the child clips within it (the grandchildren). I'm using MX2004 / AS2.The parent clip just doesn't seem to "see" any grandchildren. It doesn't seem to be a paths issue, and I'm working in an onLoadComplete function to make sure everything's loaded first. The goal is to be able to change what happens on rollover with data pulled in (via Flash remoting) to the parent clip.
View 5 Replies
Feb 4, 2009
I am loading jpgs into an MC. I make sure I wait to run and modification to the MC by confirming the image is loaded first.If I comment out the IF statements within the function "RW_pic_modifications()" and I trace the width and height of the MC AFTER each photo is loaded, I successfully trace the correct W and H.
My issue, however is when I DO RUN IT THROUGH the conditions within the "RW_pic_modifications()" function. Then any modifications to the MC W and H seem to compound and apply it to each iteration of the next MCs.I confirmed that my code and logic is correct. I just dont understand why performing a resize to the MC with one jpg loaded into it is not reset to the NEW JPG loaded into it, after the new JPG is loaded.
NOTE - I have an MC that stops on a frame until all the code here is executed. Once complete, then this MC plays to allow the pic to stay on screen for a given amount of time THEN it calls on the RW_Pauser() function.I am way over deadline.
Code:
How_long_to_pause = 4000;
Maximum_Image_Width = 137;[code].....
View 5 Replies
May 16, 2009
in (swfA.fla) I have this code in frame1
var module1:Loader = new Loader();
var admin = new MovieClip();
addChild(admin);
[Code]....
(my thought here is that 'admin' contains swfB.swf?) - this would seem very simple... but it...
...does not work and gives me this [seriously unhelpful] error:
TypeError: Error #1010: A term is undefined and has no properties.
at swfA_fla::MainTimeline/frame1()
View 7 Replies
Sep 15, 2009
I have a movieclip that contains TextFields containing XML data, when I trace the height of the MovieClip externally, the original height (before the XML is loaded) is returned.How can I get the new height of the MovieClip, (I am trying to align the Movieclip vertically to the centre of the stage)?
View 6 Replies
Jun 10, 2009
I wonder if any of you can point me in the right direction. In my stage I have a movieclip where I want to load several images with different sizes. This mc called "container" adds the loader to the stage so I'm asking for the loader width and height once has finished loading and then passing these to the width and height of the mc container so it resizes accordingly. But...it doesn't work. Here is my code:
[CODE]
var pic:Loader;var totalImages:int = 10;for (var i:uint = 0; i<totalImages; i++){ pic = new Loader() container.addChild(pic) pic.load(new
[code].....
View 3 Replies
May 13, 2011
Does anyone know the best method to trigger a function in the root from a dynamically loaded movieclip (loaded using addchild) using AS3, I understand targeting root is not the best way to do this?
View 2 Replies
Mar 2, 2007
am loading a .png image into a movieclip using loadMovie(). i wanna put a glowfilter on the .png image once it's loaded into the movieclip. is that possible? how?!
View 5 Replies
Dec 10, 2011
I am loading images into a sliding menu which will act as a thumbnail viewer, the structure of which is: "thumbsContainer" (movieclip) nested inside "galleryPane" (movieclip). The images are loaded into movieclips named "all_thumbs", which are added to the thumbsContainer stage.
I would like to mask the content of the thumbsContainer, so that only the images physically within the thumbsContainer border will be viewable.
I have tried adding my coded mask to the thumbsContainer stage, and tying it to the thumbsContainer; and have separately tried the same with the all_thumbs movieclip - but no matter how I organise my code, I can't get this to work. If the mask is tied to the thumbsContainer mc - that element disappears; if the mask is tied to the all_thumbs mc, only the background to the thumbsContainer is visible. Either way, I cannot get thumbnails to display through the mask. No thumbnails at all will display on stage.
Code:
all_thumbs.addChildAt( thumbLoader, 0 );
c = c + 1;
if ( c < totalPics ) {
all_thumbs.alpha = 0;
[Code]....
View 3 Replies
Mar 23, 2004
I have three movieclips (used as buttons) on my main MC. The following code swaps the depth of a dynamically loaded image the when I rollOver each movieclip (button). I want to put the button.rollOver code in a for loop so I dont have to repeat this code for every image loaded.
[Code]...
View 3 Replies
Nov 15, 2004
Does anyone know how I can resize the stage to match the size of an external graphic/movieclip which is loaded into an empty movieclip
View 3 Replies
Jan 21, 2004
is it possible to swap the depths of externally loaded movies? if so, what is the best way to do it?
View 1 Replies
Feb 27, 2004
I simply want to call in some loaded movies with my main swf and then be able to swap them when they are pressed. When I load my external movies into the main movie should I be putting them in separate "empty" clips? If I don't, each time I load a movie it replaces the current movie in the "empty" clip. Where do I put the code that will make the movie that is pressed come to the front? On the movie that is coming in? or the movie that it is loading into? It seems that a simple my_mc.swapDepth(x) should work? For (x) I would like to specify a number because there might be more than two clips that I would like to load in....
View 14 Replies
Jun 15, 2009
URL...I've written everything to detect when colors and teeth are selected, but I cannot figure out how to swap one movieclip for another. Right now I'm not using an actual image, just colored squares. I've set up a movieclip variable that is named each color. Basically I'd like to click a color on the bottom, then each time I click a tooth have it swap whatever movieclip is already there for the one of the color I selected.[code]
View 1 Replies
Apr 26, 2010
I've followed a few tutorials on Swapping depths, but they all refer to swapping the depth by using behaviors such as onRelease etc.
I would like to swap a MovieClip with another, but i want to do it at a given point on a timeline as opposed to doing it through a behavior so the swap isn't immediate.
I tried using the following on a keyframe this.swapDepths(second_mc); but nothing happened, the movieclip just runs through
I've uploaded my test file here:
[URL]
As you can see each movie clip runs when you click it, but i also want it to swapDepth (so the second movieclip is now on top to be clicked).
View 2 Replies
Dec 24, 2011
I use swapChildren(mc_1,mc_2) to switch depth between 2 movieclips from the root level. Everything work just fine....
but when I create a container_mc and place the two movieclips into it then the 1120: nullobject reference error occurs?? container_mc.swapChildren(mc_1,mc_2);
View 9 Replies
Mar 29, 2010
I am trying to make a timer that swaps two movie clips, so that each two seconds? Here is the code:
var leftPillar:MovieClip = new Right();
leftPillar.x=150;
leftPillar.y=250;
leftPillar.width=550;
leftPillar.height=400;
The idea is that each 2 seconds the movie clip should change to which ever one is now visible. What is currently happening is that only one of the clips ever shows, (newLeftPillar).
View 11 Replies
Oct 25, 2010
I am trying to create a basic example. Using frames i know how to do that but i want to know how this can be done using as3. Using frame: A movieclip in which there are 6 frames: Red rectangle in first 3 frames Blue rectangle in last 3 frames
View 4 Replies
Dec 14, 2011
is there a jsx script that I can use to duplicated a nested clip in my library along with all of the sub movieclips and relink them?
View 0 Replies
Dec 4, 2008
what I'm tryingto do is have a row of buttons that when clicked change the imageheld within a holder movieclip. I have a button with instance name"adept" and a holder movieclip with instance name "holder". this isthe code i have so far, i have barely started:
adept.addEventListener(MouseEvent.CLICK, Click);
function Click(event:MouseEvent):void {
eventNotice.text = "MOUSE CLICKED";
[code]........
View 3 Replies
May 4, 2011
Code:
moviclip.swapDepths(movieclip._y);
and it worked perfectly.
but I decided that I wanted to continue the development of the game in AS3 (so that it will be more up to date and I could learn the new syntax), and I found the equivalent to swapDepths is setChildIndex. so I followed the new rules and came up with this code:Code: setChildIndex(character_mc, character_mc.y);but, sadly it does not work the same. the game becomes extremely laggy and almost unresponsive, but becomes normal again if I remove the code. So, my question is how can I add a similar code for this to work properly.
View 8 Replies
