I have three movieclips (used as buttons) on my main MC. The following code swaps the depth of a dynamically loaded image the when I rollOver each movieclip (button). I want to put the button.rollOver code in a for loop so I dont have to repeat this code for every image loaded.
[Code]...
I have Macromedia Flash 8 Pro with AS2 and I was wondering if there was a function that would change the depth of a movieclip on rollover of a button.
View 1 RepliesI am using Flash CS3 and ActionScript 3.0.I think there is someone who spends 2 minutes of your valuable time in providing solution for my problem or issue.
My description for my problem(with layer numbers/names) starts from here: Layer-1: I am loading an external image(.jpeg) onto the stage dynamically when "Submit" button(which is created & placed in Layer1) is clicked using the following sample code:
[code]...
The jpeg image is loaded perfectly and works fine.
Layer-2:When I click on this loaded image, a Pop-up must be visible. So, I created Pop-up in Layer2, which is nothing but a MovieClip(with instance-name myPopup), is a rectangular box with light-yellow colored background, which makes us to feel like a pop-up). So, I created this Pop-up in a layer named "Pop-up". My requirement is : Whenever I click on the image loaded, I need to view the Pop-up upon this loaded image near to the pixel-position where CLICK_Event has occured.To view an example of my requirement,just go through the following [url]Once you open the above url, then you right-click on the right-side image(which is a geographical map). You can view a Pop-up with some of the items(viz., Directions from here, Directions to here, Zoom in, Zoom out & Center map here)
Layer-3:In the same way, in my application ,I want to display few hyperlinks on this pop-up. So, I had created TextFields on the stage(which are hyperlinks) using "Text Tool from ToolsBox" in Layer3 named as "TextFields". I am accessing these TextFields using
<TextField-instance>.htmlText to make it a hyperlink.So, here my problem is: After loading of the jpeg image, When I try to click on the image, the Pop-up(MovieClip) and "Submit" button appears to be under the loaded image and the TextFields are visible over the loaded image.Hence textfields/hyperlinks visibility works fine i.e., on the loaded image as hyperlinks.
Now, What I should do in order to make the MovieClip(Pop-up) and "Submit" button visible on the loaded image?
I'm currently working on a flashsite and are trying to figure out rollover menu buttons. The site has 6 menu buttons and are placed next to each other. I want to put a rollover action on the buttons, that when you rollover a button that the whole button image enlarges and moves in front of the other.
View 1 RepliesI wonder if any of you can point me in the right direction. In my stage I have a movieclip where I want to load several images with different sizes. This mc called "container" adds the loader to the stage so I'm asking for the loader width and height once has finished loading and then passing these to the width and height of the mc container so it resizes accordingly. But...it doesn't work. Here is my code:
[CODE]
var pic:Loader;var totalImages:int = 10;for (var i:uint = 0; i<totalImages; i++){ pic = new Loader() container.addChild(pic) pic.load(new
[code].....
am loading a .png image into a movieclip using loadMovie(). i wanna put a glowfilter on the .png image once it's loaded into the movieclip. is that possible? how?!
View 5 RepliesI have a script that loads images and text from an XML file into movieclips.The following code is what creates the movieclips that contain the elements:
Code:
var thumb_mc:MovieClip = _root.mc_conteudo.createEmptyMovieClip("thumb"+(1+i), _root.mc_conteudo.getNextHighestDepth());
var img_mc:MovieClip = thumb_mc.createEmptyMovieClip("img", 0);
I can't seem to find a way to target the thumb_mc or the img_mc so they have rollover effects and actions (they are created for each set in the xml file, so there are multiple mc's)mc_conteudo is the content mc that scrolls.The swf is here: http:[url].....
How do I put a rollover on a dynamically created movieclip?
I have several movieclips being placed inside a container movieclip and I need them to have onRollOver, onRollOut and onRelease events. The way I usually target and do this...
_root.mcContainerName.mcName.onRollOver = function() {
_root.mcContainerName.mcName.gotoAndStop("over");
}
...does not seem to work for whatever reason. However, if I put a named instance of the movieclip on the stage myself and target it in exactly the same way (with similar syntax), the rollover works fine.
Any examples on creating the horizontal scrolling menu with dynamically attached clips? the style where if the user mouses over the right hand side of the menu it slides left, etc? There's lots of tutes out there for simple scrolling but not much that take a dynamically sized clip into consideration!
View 1 RepliesI load my thumbnail into flash this way:
Code:
material.holder.loadMovie("material.png")
material.holder._xscale = 75;
material.holder._yscale = 75;
how can i make it so when the user rollsover the image loaded, it darkens to appear highlighted?
what I'm trying to do is accessingsnapText = scrollPane.source.textSnapshot;from an external swf. I've tried:
trace("-->: "+scrollPane.source.textSnapshot.getText(0, 1000));
trace("-->: "+myLoader.content.textSnapshot.getText(0, 1000));
trace("-->: "+mc.textSnapshot.getText(0, 1000));
[code].....
know how I can resize the stage to match the size of an external graphic/movieclip which is loaded into an empty movieclip,
View 3 RepliesI am creating a little flash movie, nothing major and I want something to happen. When a user rolls over a button, a image fades in somewhere else on the stage, possibly below the button being rolled over. Then when its clicked (the button) the image (possibly) expands and text is showed while the background is faded.
View 5 Repliesputting a movieclip into highest depth without knowing which clip is in the highest depth
View 2 RepliesI am new to Flash and am trying to make a page that has a fullscreen image gallery with individual thumbs along the bottom. I can more or less figure this out using some templates,but I need to do this for over 50 different projects, each with anywhere from 1-100 images.Is it possible to make more of a container that dynamically loads from a folder of images rather than have to make each one by hand?
View 1 RepliesI have made a bitmap image into a rollover button - reason - so that when the mouse rolls over the hit area of the button/image/thumbnail - it becomes larger on the stage and when the mouse moves outside the paramaters of the larger picture it goes back down to the original button/image/thumbnail size.That works fine.However . . . there is always a however. When I implemented the same functions to the other thumbnails on the stage - if I rollover the second thumbnail- the other thumbnails show up (through) on top of that enlarged image.
View 7 RepliesI have a menu that when you click on a button, an external swf is called up. However I would like for the buttons in the Over and Down state to show an image on top of the external swf with a description of what the video is about (Basically when they rollover the button).
The problem is that the image shows behind the external swf. I cannot get it to appear on top of the external swf. I have tried putting the buttons layer on top of the actions layer but that doesn't work.
I am trying to create a site with a 3D background image (which I converted to a MC). I created 2 buttons that, when rolled over should move the background image ('bgMC') to pan either right or left (depending on if the user rolls over the right button or left). I've attached the code I'm using below, if anyone has a better code or knows how to use btnRt or btnLeft to make bgMC pan to the X,Y coordinates in 'goLeft' and 'goRight'.
import fl.transitions.Tween;
import fl.transitions.easing.*;
import flash.geom.Point;
[code]...
I have a menu that when you click on a button, an external swf is called up. However I would like for the buttons in the Over and Down state to show an image on top of the external swf with a description of what the video is about (Basically when they rollover the button).The problem is that the image shows behind the external swf. I cannot get it to appear on top of the external swf. I have tried putting the buttons layer on top of the actions layer but that doesn't work.
View 1 RepliesIs there any way to bring a duplicate mc with a variable depth to the front on RollOver, and then return to it's original depth on RollOut?I am currently using swapDepths(1000).I can't have the exact depths swapped because there could be any number of duplicates on screen at any given time, so that won't work.The code I have works to a limit; when I mouse over the mc duplicate, it moves to the top just fine, but multiple other mc duplicates below it scramble depths (that is to say, they move up and down in depth at random).I want two thing to happen to only one mc at a time.
1) bring to front onRollOver and return to original position on RollOut
2) bring to front onRelease, and stay there in front.Here is what I have so far.
var num:Number;
if(num == null){
num = 0;[code]....
I'm trying to create a color picker using getPixel. It works wonderfully as long as the image is loaded from a local drive. When I try loading it from the server (a subdirectory on the same server as the SWF), the loaded image doesn't get drawn when I use the draw command. It draws a white rectangle and when I use getPixel, I always get 0xFFFFFF. I also have system.Security.allowDomain("[URL]") in my script, but nothing works.
View 6 RepliesI have added a preloader to my website with a progress bar and percentage loaded number count using the following code;
Code: Select allstop();
this.addEventListener(Event.ENTER_FRAME, loading);
function loading(e:Event):void{
[code]....
This however only determines the progress of what is stored within the main SWF file.Is there a way of doing the same thing for dynamically loaded data? I am importing SWF files into my main SWF website using this code;
Code: Select allvar my_loader:Loader = new Loader();
my_loader.load(new URLRequest("FILENAME.swf"));
addChild(my_loader);
I'm building an image gallery which creates thumbnails by sizing down the original images and once you click on one of them it duplicates itself and displays on top with full scale. I searched the web and everybody say duplicating dynamically loaded image can not be done and only solution is to reload the image. And because they are cached when they were first loaded it shouldn't take much time to get loaded. Also I heard that there is way to force the browser to cathe the image...
View 2 Replieshow to rotate about the center an image loaded dynamically through AS? I've already asked this question, no one answered, I searched, searched some more, looked through my fairly voluminous collection of example flas and have come up with nothing.The following code does rotate a mc about its center, but only (apparently) if the mc contains something when the swf loads.
Code:
onClipEvent(load){
this.rotation_speed = 2;
function origin(){[code].....
I'm loading an image into an empty movie clip on the stage.
is there a way that if the user rolls over this image it will then increase in size (say from 50x50 to 75x75)?
in flash there is a setting to 'allow smoothing' for images that are imported. how can i do this in AS3 so that the images i dynamically load are smoothed (because when i scale them they look bad).
View 4 Repliescrop the exact image through the flash action script.
View 1 RepliesI'm back and having trouble masking a dynamically loaded image. For some reason I see both the mask and the image...
Here's my code:
Code:
_root.createEmptyMovieClip("container", _root.getNextHighestDepth());
container.loadMovie("myImage.jpg");
_root.createEmptyMovieClip("square_mc", _root.getNextHighestDepth());
[Code].....
I have a MC containing a picture and a button. I have a "rollover" on my MC like, if the mouse rolls over, the MC plays.. But then, as I have a rollover command over the MC, the button in the MC seems not to be working anymore.
View 3 RepliesI have created one static movieclip and in that movieclip i have created "i" dynamic movieclips.On the dynamically created movieclip i am loading swf(Swf consists of a Preloader and then image appears).All these swf values and link(url) values i get by parsing an xml string in the FLA itself...Now the problem starts here...There are links on these dynamically loaded swf's....And I have given static rollover effect on the swf by making image as a button..Now what happens is that i have written onRelease Function in code and in that i m getting link on images(SWF) using getURL in on EnterFrame function and i am not gettin the rollover effects that i have created in static.
View 2 Replies