I have a Flash MX Form that sends data to a MySQL DB. I want to be able to validate the field type on input. When someone enters a phone number and trys to use a text chr I want it to display an error.
View 1 RepliesI recently had a client ask me to fix a previously designed Contact form on their Flash site. The form works perfectly, except for the fact that the missing fields test does not seem to work. (In other words, it doesn't recognize when required fields are left blank.) Below is the script that is called when the Submit button is clicked....it should jump to a frame that contains this:
Logo.gotoAndStop("YELLOW");
lbl_fm_name.gotoAndStop("BLACK");
lbl_fm_title_dept.gotoAndStop("BLACK");[code]....
I recently had a client ask me to fix a previously designed Contact form on their Flash site. The form works perfectly, except for the fact that the missing fields test does not seem to work. (In other words, it doesn't recognize when required fields are left blank.) Below is the script that is called when the Submit button is clicked....it should jump to a frame that contains this:
Logo.gotoAndStop("YELLOW");
lbl_fm_name.gotoAndStop("BLACK");
lbl_fm_title_dept.gotoAndStop("BLACK");[code]...
I run throught these series of checks before submitting the variables to the .jsp script.roblem is that it will ignore the sender name and receipient name as long as there are two email addresses. Why is that?
if (sendername eq "") { nameerrorTXT.text = "PLEASE ENTER YOUR NAME"; } if (emailfrom.indexOf("@")<0 or emailfrom.indexOf(".")<0) { emailfromerror.text= "PLEASE USE VALID EMAIL ADDRESS"; emailfromTXT.text =
[code].....
been wracking my brain trying to figure out how to install a validation component to this bit of as code. Currently I have it work with an email.php file specifically set up for my client's godaddy site. This part works so I don't want to mess with it too much. But how should I validate the fields then? anyone?
[Code]...
I am doing some forms in Flash Cs4 with AS3. The forms are working well, but i have a code to check if people have enter information in every field.But the verification only works for 2 field. The code is exactly the same for the other but it doesn't work. Can you double check my code and maybe explain me why it doesn't work or maybe how to replace the validation code by another.The validation works only for the LastName data and Email field.Here's the code;
submit_btn.addEventListener(MouseEvent.CLICK, ValidateAndSend);
function ValidateAndSend(event:MouseEvent):void{
//validate form fields[code]........
I am doing some forms in Flash Cs4 with AS3. The forms are working well, but i have a code to check if people have enter information in every field. But the verification only works for 2 field. The code is exactly the same for the other but it doesn't work. Can you double check my code and maybe explain me why it doesn't work or maybe how to replace the validation code by another.The validation works only for the LastName data and Email field.Here's the code;
submit_btn.addEventListener(MouseEvent.CLICK, ValidateAndSend);
function ValidateAndSend(event:MouseEvent):void{
//validate form fields[code]................
I'm trying to load in xml test data into a dynamic text field.
this is my code so far:
var me_XML:XML;
var xmlLoader:URLLoader = new URLLoader();
xmlLoader.load(new URLRequest("me.xml"));
[Code].....
This, however, loads all the text in with tags. How would i go about accessing each node so i can remove the tags so I can apply a css style to each section??
I have managed to import and read a PDF using the CF Proxy for Actionscript: [URL]After all my trouble there, the precious form filed information that I was looking for was not there in the PDF info object. GRRRR. So I am back to looking for a way to do this with CFC's or CFM's or PHP.All I want is this:
Read the PDF from a Flex app.GET the form field information.WRITE a new PDF with the form field values.I have found so many close but no cigar options ... and I have tried so many that failed. There are so many free PDF this and that out there. But Adobe seems to reserve the real functionality for themselves. All the free options don't seem to have access to the form data?
I have created a simple Flash website:
[URL]
It's HTML was also created in Flash using Publish Settings. However, when I tried to validate this HTML using online validator, it failed the test:
[URL]
I am a complete novice in Flash and in HTML
I need a add a competition form with validation.will need details like name, age, email, post code, gender and so on.
p.s. form is going out to AMF
I'm working on a form validation script, and whilst I like (in theory) to build reusable classes, this is one time I'm finding it a bit tricky.
The problem is it's difficult to build something loosely-coupled when the actual components of the form could be textfields, Flash components, or even my own basic custom components.
Interfaces are out the window, as an interface (say IFormElement) I might set up with getters and setters for label, error message and value, won't be relevant to Flash UI components.
At the moment, I'm leaning towards a base Validation class that should be extended in order to cater for different flavours of forms, with getValue() and setError() type messages.
The problem again here is that it is difficult to retain type safety, as when overriding the methods in the subclasses, obviously one can't change the type within the method signature.
i need help badly.the validation of the contact form in this tutorial.example: when someone didn't type in their First Name, there will be a pop up message asking them to fill in all the details before they can proceed.[URL]
View 14 RepliesI'm in the process of testing this flash email form: [URL]. Enter '27' in the 'Go To page ' text field and click go to be able to view the form. Once you are viewing the form if you click send without entering any text/data into any field it allows you to send a blank submission. It should send you to a failure screen and tell you to start again.
The actionscript is as follows...
stop();
var senderLoad:LoadVars = new LoadVars();
var receiveLoad:LoadVars = new LoadVars();
// Adds conditional logic for the Submit button that
// validates user input.
[Code] .....
Ive been trying to get an email validation working for my form. It works great locally within flash preview, but not locally via its html window, or live. Im not a coder & am self taught to the code will be pretty shabby! (trial & error type gal!)
This is on my send btn,
Code:
on (release) {
if (form.name == null && form.email == null && form.message == null) {
errmsg = "oooh, you didnt write anything";
} else if (form.name == null) {
[code]....
When live it doesnt allow sending if the criteria arent met, but doesnt display the error messages either,
I'm trying to do a simple form validation from a text file. The text file has the variables loaded like this:
code1=WIL6542&code2=BISH4765&code3=NICH9876
I am loading the variables from the text file just fine.
I have a single variable input field on the form, it is called code
I have a single button with the actionscript below but it's not working. If I leave the input field blank it passes, if I put a correct or incorrect code in the input box it fails.
on(release){
for(i=1;i<100;i++){
if(eval("code"+i) == code){
[Code].....
I am putting together a Flash Form. I had it all finished and posted it on a testing site, then I realized there was a problem.I have form validation that works like this. If a user hits the submit button but has not entered information in all of the required fields, the user will get an error message telling them to input all required information. However, there is a workaround. It seems that Flash sees the value of the "spacebar" as a positive value and lets users get past my validation.I need to assign the "spacebar" a value, make it a variable, or something along those lines. Then tell it to be equal to "0", which is not an acceptable number to pass my form validation.
View 5 RepliesI am trying to create a simple form using Actionscript 3 that will collect data from a form, then pass that data to an asp file. I have attached the following code to the submit button,but this is not working.I'm not sure if I have to add anything else and I don't understand why this is not working. I'm trying to load all the variable info into one variable called email form.
submit_btn.onRelease = function() {
var emailform:text;
emailform.email_txt = email_txt.text;[code]......
I'm looking to build a banner advert for a client that allows users to input their details in order to receive a free guide sent through to their email address / have the option to enter their phone number for a call about the promotion. I've cracked the email validation (i think), however I'm having a few problems validating phone numbers before they are approved and sent for data collection. I have found the following tutorial online (url.../) which provides you with the following code;However, this is for US phone numbers I think and I'm looking to either have it UK based or preferably allow all telephone numbers to be validated (is this possible?). Currently the form on the tutorial page does not allow for standard UK landline and mobile phone numbers.[code]
View 1 RepliesI'm about to build an OOP signup form in AS2 with realtime data validation. There are 3 fields 'Username', 'Password' and 'Email' and two of those will check with the server to see if the the username or email is taken. This is almost identical to the signup form on [URL] The way I've experimented with so far is to begin an onEnterFrame event on the textField as it receives focus. This onEnterFrame function checks for spelling, character count etc When the textField loses focus it then sends the data to the server and checks if it already exists. If it doesn't, it will validate. What I've written works rather well (up until the submitting - haven't worked that out yet) but the code is rather unwieldy and seems too long.
What is the best way to go about building this? Are onEnterFrame checkers the best way to go? Should the data send to the server onKillFocus? Should the submit button trigger all the onEnterFrame validation functions to run again (in case the user didn't wait for validation)
where can i get a sample user details form and validation?
View 1 RepliesI made a login form using flash and made it pass it's variable to php for validation. I have two (2) variables from my php file that I want to pass to flash so it can control my movie. When I pass those two (2) variables, the first one has no problem. My dynamic textfield displays the value that the php sends but when I pass the second variable from my php to flash and displays it in my other dynamic text field, it displays the value but it appears to have html tags i.e.,
1<br /><b>Notice</b>: Undefined index: userLoggedIn in
<b>C:wampwwwestfernwoodestDisplayClients.php </b> on line <b>83</b><br />.
The value of my variable from php is 1 and as you can see, it contains html tags. How can I remove these tags?
How would I code this so that when entering a number 1-10 in the text field the MC on the stage will go to that frame? Ie if I enter a 9 the MC playhead will gotoandstop on frame 9. I have attached a .zip file to illustrate
View 0 RepliesDoes anyone know of a way to restrict a user from entering a number over 100 into a textinput field in flex? i.e. a user can enter any number between and including 0-100 but not 101
View 3 RepliesIs it possible to change text in like a notepad file by using flash so entering text into a input field and then posting it to an external file.
View 1 RepliesI have a script to verify a zip code. It works fine except when the field is empty. [code]If I enter too few numbers it works and turns the text red. If I enter the correct numbers it works and sends me to the site. But if I leave the field blank and click, it sends me to the site anyway.
View 3 RepliesI have created a small application with three different slides.
-one at frame 1 which acts as a Home page
-one at frame 2 which acts as a Gallery page
-one at frame 3 which acts as a Contact Page
On the contact page i have the following 'skeleton' code.. which i have to follow..[code]i need basic validation such as text lentgh, and also correct email format (i.e. containing a '@'
I'm trying to figure out Flash CS5 on my own, and this should be easy, but... All I want to do is validate that the text entered in a text field is a number when a button is clicked. It can be a positive, negative, or decimal, but no letters or symbols.
View 3 RepliesI have a form with a horizontal layout and with this TextInput:
<s:TextInput id="platformNameTI" showErrorSkin="true" showErrorTip="true"/>
I have a simple validator that just checks if there is something entered (required field). My problem is as the layout is horizontal, when an error occurred (required file missing), all form items are shifted because of the error icon. Is there a way to delete that annoying icon or force the component to not display it?
I have written a simple program to randomly generate the name of a student from my class. Other teachers have asked if they could have a copy but as you can see from the code, I have to manually enter their students' names into the array.I wonder if there is a way to enter a list of names into the array from an external file so that teacher's can enter their own students' names and change them when needed.
(here is the code for a button that generates the students names)
on (release) {
_root.student1_txt.text = "";
myStudents=["Chloey","Paul","Rachel","Kudzayi","Josiah","S arah C","Daniel C","Micahel","Daniel Ha","Daniel He","Amanda","Tammy","Zach","Sam","Sarah M","Xanthe","Charlotte","Bethany","Luke","Jessica"
[code]....