ActionScript 2.0 :: Transitions Between The Frames?
Oct 26, 2011
I am working on a slideshow (sort of). The idea is that each frame in the root timeline works as a slide. Each slide inside each frame is a simple MC filled with images, texts, audio and animations and so on. Once this MC reaches its last frame, it should stop and trigger another MC used as a transition. And I've put inside this transition MC a code that should tell the root timeline to advance a single frame in order to show the next "slide".
So, on the timeline, I've put this code:
***
this.onEnterFrame = function(){
if(slide._currentframe == slide._totalframes){
[code]....
Well, needless to say it is not working. The whole swf just stops. And if I remove the stop() code of the Transitions MC at frame 2, the current slide will loop before the transition triggers the nextFrame command.
View 1 Replies
Similar Posts:
Apr 28, 2003
my preloader starts at 55 percent. this is because the first frame (if i can trust the bandwidth-profiler) has a size of 32 kb. i think this is strange, because the b-profiler also tells me the film has a total size of 35 kb. after the first preloader frames are some small files with transitions only, and then there is the main frame, which has a size of 18 kb my preloaderframe only contains a small bar and a dynamic textfield, just like the tutorial says... i ve already searched the forums, i found that quite many people have the same problem, but i didnt find any solution... i do not load any swfs dynamically. the only thing i can imagine that could cause that problem is the embed font which i use for the dynamic textfield in the preloader. is that possible?
View 8 Replies
Jan 29, 2010
how do transitions from page to page and from frame to frame all in on site, and i'm lost in the codes this is an exemple that i did in attachment, i want to be able to click in the different buttons bur a lot of thinks do not work. In the portfolio section i create a move clip that works well alone, bur when i integrate it with the home intro it didn't work properly. Hope that someone will be able to help me on that one, cause i think that this will help me a lot to understnad the basic transitions with buttons (frame to frame and page to page).
Attachments:
NextFramePratice copy.fla.zip (10.1 K)
View 2 Replies
Nov 16, 2009
I want to create a preloader that plays a certain amount of frames as it loads the rest of the frames. So, I have labels on the frames basically and need a preloader to play the "loading" frames as it is loading the "content" frames. Does that make sense? I have no idea how to even start this one... p.s. I am using AS 2.0, but if it can be done in 3.0 easier, I can switch over its no biggie
View 4 Replies
May 2, 2011
there seems to be no accepted method of playing multiple flv using buttons. My latest attempt has me putting multiple instances of the flvPlayback component in different frames and using buttons to navigate to those frames. It works but nothing anyone has posted anywhere will result in removing the flv when you go to a different frame and instance. This was simple in AS2. Load movie to a traget and each time you load a new movie the other one goes away. REALLY goes away.
View 7 Replies
Nov 24, 2011
basically im making a quiz on my main timeline ive got my questions and answers and on the last frame i want it to say how many answers the user got right. ive made a movie clip on this last frame. in the movie clip ive got 11 frames with the posible totals so frame one would be 0/10 frame 2 would be 1/10 etc what i want to do is when the user clicks the correct answer on the other frames i want flash to make the frames within the movie clip to go 1 step forward.
View 2 Replies
Mar 26, 2009
I have a function that counts days and some other variables and displays the values via dynamic text.
[Code]...
I have to place the incrementCount(): function every 12 frames so that it increments the values. Seems like it would be easier to simply modify the script to count "every 12 frames" but I can't find anything that tells me how to "count frames" in flash. Seems to be this is probably basic but I've searched unsuccessfully....so how do you do this. How do I get my script to work so it's frame based so I don't have to put incrementCount() every 12 frames?
View 16 Replies
Jan 7, 2010
Is it possible to have an movieclip of about 50 frames and navigate between these 50 frames? As if u put a marker on frame 10 and one at frame 30 and if u use a button it plays to frame 10 and stops and use another button to go from frame 10 to frame 30 and stop... and reverse if u use the earlier button.
View 5 Replies
Jan 8, 2010
I want to preload all of the voiceover swf files before a lesson starts so that they are instantly available when each frame / page that incorporates a voiceover is first visited.
View 4 Replies
Dec 30, 2009
I'm building my first AS 3.0 application and am using external .swf files that load into a main.swf. I'm creating transitions for each external .swf as they are unloaded so when the user clicks next, the current .swf transitions out and the new one comes in. Since loadMovie and levels are obsolete in 3.0,I've looked into the transitions manager class, but some of my transitions are pretty intricate so I would need to use timeline based tweens.
View 2 Replies
Aug 14, 2009
I only open it up a couple of times a year to replace a banner ad in a clients web site. But I am having a problem with the transitions that I haven't experienced before. I created a new flash file with text that fades in over 24 frames before going to the next bit, but when I test it, it just jumps from one text to the next without the fade in. It plays fine on the stage, but exports the .swf file without the fade transitions.
View 3 Replies
Jan 10, 2004
Below is the code which is used to trigger the transitions. For reference 'home' is movieclip and 'homestate' is a button in the movieclip.
home.homestate.onRelease=function(){
if(_root.section!="home.swf"){
_root.section="home.swf";[code]....
I try incorporating these actions into the first script but I get an error.
home.homestate.onRelease=function(){
if(_root.section!="home.swf"){
_root.section="home.swf";[code]...
View 5 Replies
Mar 7, 2004
i was also wondering if it's possible to make transitions with masks using actionscript?i have section headers that i want to transition when certain buttons are clicked, and depending on what button is clicked, a new section header is shown. i put all the section headers in a movie clip, with different frame names, so when the button is clicked, it jumps to the different frame name of the movie clip.for the transition, i basically want a wipe left to reveal the section header.. and a wipe right to hide it... and to do this, i figure i'd need to mask...
so i put a mask over the movie clip and realized that flash doesn't mask movie clips very well, when using masking layers.. so it doesn't really work properly.is there a way to do this using actionscript? and if so, how? i know flash know has a setmask property for movieclips..but can you modify the mask property's size??
View 3 Replies
Aug 24, 2004
I found this site and I like the transitions between the photo's. how to make such an effect! Is it done with masks? or......?
View 14 Replies
Mar 8, 2006
I have a menu with 4 buttons, once clicked each button sends you to its corresponding section (frame label). Each section has a different loading animation. Once in a section I would like to go to another but before this that section's specific transition animation must play. Now I've looked around and all I can find is how to do this with a universal transition animation.
View 3 Replies
Aug 15, 2006
[URL]theres the link for the turorial. my questions is, how can i use movieclips instead of using buttons. i thought it would be simple enough to create a movieclip, add the on release as to it and done, but it doesn't work. i also converted the file to flash 8 btw.
View 1 Replies
May 19, 2008
Is there an updated version to this tutorial? I'm specifically trying to apply the technique, but using a tween engine (tweenlite) as well as MovieClipLoader.Or perhaps there's a newer, more efficient way to load swf's with transitions?
View 2 Replies
Jan 30, 2009
I read the tutorial about transitions between external swfs and started implementing it! So as a good and ordonate guy that I am, I put the index.html in the root, created a style folder for the style and a folder for the swfs. I was struggling about one hour to find out why it wouldn't work, to find out that if I move the html inside with the swfs, being in the same directory, it worked fine!
View 3 Replies
Feb 10, 2009
I am using Flash CS3 AS2 I have a main movie into which several external swfs are loaded. Two of these swfs are left_menu and middle_menu. I would like these to be able to talk to each other. When the 'home' button is pressed on 'left menu' I would like 'middle_menu' to go to a certain frame and play out. I have had a look at the tutorial which differs a bit and I'm a little confused (very new to actionscript!). I have put on by 'home' button if 'left menu':
[Code]...
View 4 Replies
May 2, 2004
I know how to do transitions that use external swf files using levels
What if i wanted to do it all in one swf? an example is here below:
[URL]
If you vist the profile page for example, you will see four main buttons at the top, Details, experience, favorites and hate. If i click on one of these some secondary buttons appear underneath, RED ones.
Now then if I press experience for example, the red buttons appear below and now if i click on favorites the experience buttons slide out to be replaced by the favorite buttons. I could do this with external swf files and use midframe actionscript but this all appears to be happening in one swf.
View 5 Replies
Mar 9, 2003
I am creating my first Flash Web site, learning ActionScripting as I go. I think my most recent problem requires some simple scripting, but I haven't found a solution on the Board, so I decided to post this message.
Basically, I am trying to make the transitions between each section of my site seamless, and in absence of any HTML-like jumps in which the page just cuts to another. For example, when you click on a button from the main navigation area of my portfolio site, you are taken to another section (separate scene),and the content area changes.I want the previous scene to fade out, after the button is clicked, before the new scene loads. Another words, I need to figure out how to tell the timeline to do this for each button:
When I click the Graphics navigation button,FIRST play frames 300-310 of the current scene (fading out animation)THEN take me to the frame label graphics.Heres the code attached to my Graphics button currently (it nested inside a movie clip, hence the _.root part). How would I change this to get it to play frames 300-310 of the current scene before it takes me to the graphics page?
on (release) {
_root.gotoAndPlay("graphics");
}
View 14 Replies
Jun 6, 2009
I've just created a sliding transition, see code below, which masks an image however when I run the swf it doesn't work and just displays the whole image without a mask.
[Code]...
View 3 Replies
Aug 9, 2009
I need to have a delay between two transitions that I'm running. How do I do this with my code?
import fl.transitions.*;
import fl.transitions.easing.*;
var bb_mc:bb = new bb();addChild(bb_mc);
var header_mc:header = new header();
this.parent.addChild(header_mc);
[Code] .....
View 4 Replies
Jan 5, 2010
[URL].. lines a lot in our files to set up AS Tweens. Is there a way to import these globally on one frame of ActionScript instead of having to put it in AS for every time an MC is being tweened?
View 1 Replies
Apr 20, 2010
how to code transitions between pages. specifically, i want an animation to play when you arrive at a page and the same animation to play in reverse when you leave the page.my website is built in flash cs3 using as3. the buttons are coded using simple eventListeners jumping between keyframes on a single timeline using gotoandPlay actions.
View 6 Replies
Oct 14, 2010
trying to have slideshowish thing, loading images with transitions. I have this code for first image, what I need to load next images..
[Code]...
View 4 Replies
Jan 2, 2011
I'm new to the world of as3. I was wondering if it was at all possible to have the UIloader load my external images with automatic fading transitions . I have searched the internet, and have found a few methods that include xml files, but I was wondering if there was a simpler method that used code that could have the same effect when directed to the source location.
View 5 Replies
Jun 9, 2011
I use Flex4.1 to compile following code:
import fl.transitions.*;
When I compile,it raise "fl.transitions undefined" error. Where can I download fl.transitions package?
View 2 Replies
Jan 20, 2012
I'm building an iPad app with some stories and I have an animation that runs when each story is opened. I created the first animation at 30fps and it works great on an Android tablet and in the Air debug launcher, but when I compile it for the iPad the transitions are very jumpy. It acts like it's only running at 5fps on the iPad.
View 3 Replies
Jul 13, 2011
I need to do some work with some custom tweening and I understand how I'm suppose to do it.However CS5 is not able to resolve my import statements.I have import fl.transitions.Tween;import fl.transitions.easing.*;and both of these cause an error. The error is "definition fl.transitions.Tween or easing could not be found"The import statements are turning blue so flash is recognizing the path and I am able to import other fl components like fl.controls and fl.events. Why is my program unable to resolve these imports and how can I fix i
View 1 Replies
