I've just created a sliding transition, see code below, which masks an image however when I run the swf it doesn't work and just displays the whole image without a mask.
[Code]...
I am trying to load a colour image and then it is changed to black and white image. Here I am using a mask. But it is not getting worked. The code that i am using for this purpose is attached following: import
[Code]...
I'm extending a tutorial from Flashtuts by Michael Chen. My goal is to have the grid fill in random, masking the image for a transition, as the famed Mask Effect transition from Flash-filter. This is what i got so far: URL]
[Code]...
I'm coming from AS3 and I'm trying to mask a SWF file that's being imported in but it's doing something pretty funky. The SWF file is coming in fine, but when I'm masking it, it shows the shape I'm masking with, but it's also masking because nothing is going beyond its' edges.
{
var mask_mc:Shape = new Shape();
mask_mc.graphics.beginFill(0x000000);
[Code]....
I would like to reveal an image by drawing over it with the mouse. The drawing part is not a problem but I don't succeede with masking the image with the drawing. Here is my code:
Code:
var myImage:theImage = new theImage(); //linked image from the library
var canvas_mc:MovieClip = new MovieClip();
[code].....
I'm loading an external image to use as part of the background for each section (other section, new external image). But that image needs to be animated in, in a certain shape (I have created a kind of spatter animation).I always use an Movieclip container to place my external images. So on one layer I have this container clip. I mask this layer with a layer on top of that one, which has the splatter animation (this splatter animation is not a movieclip, just some keyframes with the animation).Everything works, except that the image is not loaded. I checked everything, maybe I put the wrong url or something. But nothing.
So I tried unchecking the mask option. Ok... now my image did load. But as soon as I check the masking of that layer, again I'm left without image.It seems to me that it has problems with loading images that are begin masked. How can I fix this? I tried google'ing, but few solutions were found. And I'm nog programer-guru. I use flash semi-design/semi-program.
I have a 8x 10 array of mcs on stage each which contains a small image. So, there are 8 parent clips (columns) each containing 6 child clips containing the thumbnail images. If the movie clip arrays are created dynamcally (therefore loaded into the top layer) how can I mask them? I'd like to be able to mask 1 vertical (parent) column at a time (so only 1 of the 8 columns (6 images) is visible.
View 14 RepliesFlash CS4 AS2 Okay -I have a flash movie, and I want to apply a mask to it. The mask I want to apply, or rather, the "shape" of the mask I want to apply is an external image that was made in photoshop. The shape is an irregular one with a bunch of jagged edges. the shape itself is solid, with a transparent background. I've tried saving it as a PNG with transparent b/g, and I've tried importing the PSD file directly into Flash - however - when I go to use this shape for a mask, the mask that is applied is an entire rectangle bounding the imported image - rather than along the edges.Hopefully you can see what I'm trying to do here, and perhaps offer some insight on how I can get this image into flash (let's stick with the idea that the jagged edged manner of the image is too difficult to recreate inside of flash).
View 13 RepliesI made an xml loaded dynamic image gallery and I cannot figure out how to crop the image should it be too big. Masking appears to work only with a movieclip created outside of actionscript (which cannot be created dynamically).
View 2 Repliesvar thumb_spacing = 40;
// load variables object to handle loading of text
var description_lv = new LoadVars();
[code]......
i have a problem with Interactive Image Panning & Alpha Channel Masking. without panning codes masking is working but with panning i can't see my masked area. code is below and icant find where i am wrong or what i am missing
[Code]...
does anybody know a easy way to make image transitions in Flash CS4? without using the timeline and without to much programming. Why invet the wheel again if somebody already has the answer? This is what i want to do:Put images/photos in a folder or import to the Flash libary and then let flash view the pictures with a pre-setted transition. The transitions could be: fade in/ fade out, blur in/blur out, pixel in/pixel out, zoom in/zoom out and so on (with a nice look) I want to select the pictures to be used and then select a transition for each image.
For an example if i wanna do a image header lets say 900x400px and then vĂew my images in the folder with the selected transitĂon. I tried to use the slide presentation feature but the transition looked like PowerPoint, boring and not so smooth. Somebody has a simple and free solution? I know this is not to hard for a experienced Flash user, but im a beginner =).
I have an XML image gallery that works great, but I'm not satisfied with how the images transition. I'd like the old image to fade out while the new one is fading in whenever the viewer hits the previous or next button, so that way there's no blank background space between the transitions while the new image is being loaded. Below is my code[code]....
View 4 RepliesI have been trying to figure out this problem for a couple days. I made an animation using actionscript 3.0 and the GreenSock TweenLite to load images in through XML in flash. When you click the button (btn1) to go to the next image, it animates in perfectly, but since I am multiplying 140 each time, if I click btn1 while the image is transitioning in, it adds another 140 to that value and the next image goes off the screen. Think of it as a slot machine effect, witch is pretty much what it looks like. The images load in as if they're on a reel, vertically. I would like to know how to set a limit so that instead of adding 140 to the value, it goes to the next image instead, and centers it perfectly in the mask I have set up. Do you guys get what I am trying to do? If not, I can zip the folder up and attach it here, but it's a project for a client so I'm a bit weary.
Again, quick summary: btn1, if clicked more than once during the span of the image transitioning in (through XML and gs.tweenlite), the image gets 140 added to its positional value and goes off the screen.
Code:
import gs.TweenLite;
var id:int=0;
var list:XMLList;
var xmlLoader:URLLoader = new URLLoader();
[Code].....
I'm trying to create a simple yet effective image slideshow for my homepage. It'll be a bar, 600 pixels wide, by 300 pixels high. There will be 4 buttons that will line the bottom, numbered 1 through 4, that will control 4 separate slides that'll appear in that window. If you don't click anything, the images will fade in and out after x amount of seconds. Clicking on the numbered buttons will load the appropriate slide, and each slide when clicked will take you to a certain part of the website.
I wish to do this in actionscript... not using the timeline as I prefer to do all transitions in actionscript. Can anyone shed light on how to set this up? I've been trying to use the TransitionManager function... however I'm getting mixed results. Here's a screenshot:
Code:
import fl.transitions.*;
import fl.transitions.easing.*;
ss1_mc.alpha = 1;
ss2_mc.alpha = 0;
ss3_mc.alpha = 0;
ss4_mc.alpha = 0;
var currentImage:MovieClip = ss1_mc;
[Code] .....
Is it possible to make this a mask? The system contains one movieclip of a circle called ball, also a class called ball and a class called particle. I want the particle system movieclips to display an image...I'm sure this is possible...just have not been able to find a way. A little backround, I'm a completely selftaught n00b when it comes to AS3, but I'm grasping it fairly well... the tutorial is on this website, called A Simple Particle System Using Actionscript 3.
View 0 RepliesI want to have two makslayers that is masking the one layer under.
View 1 Repliesi made a masking anim using frame by frame animation on the mask layer...
when i exported the swf it was of 83 kb (too huge) and i checked it was all due to shapes in the mask layer....
i found "eltima swf optimizer" on internet but it gives only black and white output in the demo version ....
i opmitized all shapes one by one by using modify>shape>optimize using 100% optimization but when i exported swf this time was 114kb(even more) this sux!!!
my question is that is there any other "swf optimizer" that i can use for free.. (hey its my school project and i just need to mask a single jpeg)
I posted a message a while ago about creating a spotlight effect over a background and it was suggested that I use masks to create the desired effect. This worked fantastically.... until now lol. I need to mask both the background image AND some randomly generated on-screen objects. Whever I try to add the mask to the objects generated at run-time, it ceases to mask the background as well!
I should probably have expected this one... but was just wondering what was the best wat to get around this? Should I create 2 'spotlight' objects which directly overlap each other, but have one set to mask the background while the other masks everything else? Or is there an easier approach?
I want to have two makslayers that is masking the one layer under.
View 1 RepliesI'm trying to make a mask for this menu, I was trying in many different ways, but I still do not understand why it doesn't work.
menu = new XML();
menu.ignoreWhite = true;
menu.load("the destination That we are loadin xml from");
menu.onLoad = function() {
[code]....
That was the code of menu. This menu is inside the main movieclip. But I want to mask this menu incase making the shape of the last and first button.
I have a PNG file with transparency imported into the library and converted to MovieClip.Now I want to use this PNG file for masking another sprite drawn dynamically using the drawing API. I know that you cant mask a runtime generated sprite with a author time movieclip. So i created another runtime sprite and copied the BitmapData of the PNG in the library to it. The masking happens, but not the way i want. The BitmapData is always a solid box and the masking apears across this box. I would like to have the transparent region of the PNG omitted from the mask data
View 7 RepliesLets say I have 3 layers A, B and C. I want A to be the mask for B which is pretty easy, but at the same time I want B to be the mask for C. Is that possible?
View 2 RepliesIs there a way to make Flash work with masks in the same way as in Photoshop?In Flash, for a mask layer to work, it needs to be in shades of transparency.In Photoshop, you can use a fully opaque mask layer, and the mask is applied by using the different shades of black and white.
View 1 RepliesHow do I add text effects such as a mask to text that has strokes, or decorated text? I would like to have a masked effect on special type that has a stroke to it.Currently the mask works on static Arial text and when I convert the static text to a movie clip. But the mask doesn't work when I convert the static text to dynamic text.
View 3 RepliesI need to create the effect of something appearing dynamically. I have th�s script type font, that I want to have the effect of being written out. So I guess what I need is some tutorial on masking.
View 2 RepliesI've been having some trouble with this code:
Code:
onClipEvent(load)
{
_root.stop();
dO = 3.6;
r = 75;
[code]....
I've created a movieclip with a donut graphic.Set the actionscript to the clip. Created a 2nd frame in the timeline with a photo.Nothing happens.
I have gimp. I have flash cs4.I have a picture of a dog that is 200 by 200 pixels with alpha transparency (you only see the dog no background, it's a png).Now I want to make only the dog listen for a mouseclick event. I saw some way of doing this by looking at the point where the mouse click event occured, and then stopping or continuing the event propogation based on if the pixel clicked was transparent or not. This seems sort of hackish. The "Clean" way I propose is by using a mask over the 200 by 200 image, but the mask should be shaped like everything that is NOT the dog. So it's a mask with a hole in the middle. the hole in the middle being nothing. not even alpha. Or the other way if this isn't possible, is to create a 200 by 200 image with just alpha value 0, and then stamp the dog on top as a mask... It appears there is nothing out there that describes how to do this.All I see are "bitmapfill" on squares and circles, which is utterly basic.
View 1 RepliesI am trying to mask a duplicated mc.
I am attaching my .fla so you can take a look. The code is a bit long, but I marked the setMask code line with dashes (it's right on top). I marked out the setMask line so you can see how it looks like, because when I do mask, you can see any of the MCs that are being masked.
I search my problem in this forum prior to writing this. I got a thread that explains exactly what I needed to know; however, it doesn't work for me...I am trying to mask a duplicated mc.I am attaching my .fla so you can take a look. The code is a bit long, but I marked the setMask code line with dashes (it's right on top).I marked out the setMask line so you can see how it looks like, because when I do mask, you can see any of the MCs that are being masked.
View 3 Replies