Have Two Makslayers That Is Masking The One Layer Under?
Feb 23, 2012I want to have two makslayers that is masking the one layer under.
View 1 Replies
Similar Posts:
Have Two Makslayers That Is Masking One Layer Under?
Jan 13, 2010I want to have two makslayers that is masking the one layer under.
View 1 RepliesActionScript 2.0 :: Grassy Field Tut - Masking The Layer Doesn't Work
Dec 23, 2003I took Kirupa's tutorial on how to make a grassy field (which can be found HERE and it worked out. But now I have a different problem: I need to get all those grassy blades out of my movie at a sudden point. They just need to go, but I can't figure out how to. I tried multiple things:
- Masking the layer doesn't work
- Creating a new layer on top of them all, and putting a black square on that one, which covers everything, doesn't work either
- Changing the alpha of the first blade...nope.
ActionScript 3.0 :: Masking Layer With Fancy "Multipart" Reveal?
Feb 5, 2010I have an image 300 x 400 and want to reveal it 100 x 100 at a time in a cascading flow. I can create a 300 x 400 triangle & tween it to fade the image in, but I want to reveal small portions at a time like puzzle pieces coming together. Since masking only works for the layer below it, I apparently can't make 12 layers that each reveal only 100 x 100 segments.how I can get this effect?
View 5 RepliesHow Does The Flash Layer Interact With The Flex Layer In A Multiple Layer Design
Aug 26, 2011Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 RepliesActionScript 3.0 :: Putting An Action Layer Over A Layer With A ClickTag Element
Nov 19, 2009I am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 RepliesActionScript 3.0 :: Convert Layer To Movie Clip Or Print Layer?
Aug 9, 2010Im creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
Actionscript 3 :: Create Multiple Layer Masks Over A Single Layer?
Mar 22, 2012Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 RepliesProfessional :: Can't Seem To Go To A Master Edit File That Is Supposed To Show Both The Body (layer 1) And Wing (layer 2) Of A Flying Bird Animation?
Feb 11, 2010I can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 RepliesProfessional :: First Layer Contents Disappear When Pressing F6 On Second Layer?
Jan 11, 2010I want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 RepliesActionScript 3.0 :: Draggin MovieClips In A Layer Beneath Another Layer?
Aug 17, 2010I have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
How To Have Outline Sketch On Layer A And Color On Layer B
Nov 5, 2009I'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
ActionScript 3.0 :: Conditional Error "Scene 1, Layer 'Layer 3', Frame 1, Line 291083: Syntax Error: Else Is Unexpected?
Dec 12, 2011Why this code doesn`t work?
tip_052.addEventListener(MouseEvent.MOUSE_OVER,ove rSub);function overSub(evtObj:MouseEvent) {
tip_052.visible = true;
else[code]....
appear this error "Scene 1, Layer 'Layer 3', Frame 1, Line 291083: Syntax error: else is unexpected.
ActionScript 2.0 :: Error - Scene=Scene 1, Layer=Layer 1, Frame=1:Line 11: ';' Expected
Jul 27, 2004this is the END of the code:
this.createEmptyMovieClip("pos", total);
pos.moveTo(radius.b, 0);
pos.beginGradientFill("radial", [0xCCCCCC, 0x999999], [100, 100], [0, 255], {matrixType:"box", x:-radius.b-radius.b/2, y:-radius.b-radius.b/2, w:radius.b*2, h:radius.b*2, r:0});
for (var radians = 0; radians
I get a error for the last line. The error is this:
**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 11: ';' expected
for (var radians = 0; radians
I cant get it working.. I have flash mx 2004 pro..
ActionScript 3.0 :: Possible To Add Layers / Re-order Layers / Move Movieclips From Layer To Layer
Oct 22, 2008Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 RepliesSize Too Large Of Masking?
Jul 25, 2010i made a masking anim using frame by frame animation on the mask layer...
when i exported the swf it was of 83 kb (too huge) and i checked it was all due to shapes in the mask layer....
i found "eltima swf optimizer" on internet but it gives only black and white output in the demo version ....
i opmitized all shapes one by one by using modify>shape>optimize using 100% optimization but when i exported swf this time was 114kb(even more) this sux!!!
my question is that is there any other "swf optimizer" that i can use for free.. (hey its my school project and i just need to mask a single jpeg)
ActionScript 3.0 :: Masking 2 Objects At Once?
Nov 6, 2009I posted a message a while ago about creating a spotlight effect over a background and it was suggested that I use masks to create the desired effect. This worked fantastically.... until now lol. I need to mask both the background image AND some randomly generated on-screen objects. Whever I try to add the mask to the objects generated at run-time, it ceases to mask the background as well!
I should probably have expected this one... but was just wondering what was the best wat to get around this? Should I create 2 'spotlight' objects which directly overlap each other, but have one set to mask the background while the other masks everything else? Or is there an easier approach?
ActionScript 2.0 :: Masking The XML Menu?
Jul 28, 2005I'm trying to make a mask for this menu, I was trying in many different ways, but I still do not understand why it doesn't work.
menu = new XML();
menu.ignoreWhite = true;
menu.load("the destination That we are loadin xml from");
menu.onLoad = function() {
[code]....
That was the code of menu. This menu is inside the main movieclip. But I want to mask this menu incase making the shape of the last and first button.
ActionScript 3.0 :: Using BitmapData For Masking?
Jul 13, 2007I have a PNG file with transparency imported into the library and converted to MovieClip.Now I want to use this PNG file for masking another sprite drawn dynamically using the drawing API. I know that you cant mask a runtime generated sprite with a author time movieclip. So i created another runtime sprite and copied the BitmapData of the PNG in the library to it. The masking happens, but not the way i want. The BitmapData is always a solid box and the masking apears across this box. I would like to have the transparent region of the PNG omitted from the mask data
View 7 RepliesIDE :: Advanced Masking With Flash?
Jan 14, 2009Lets say I have 3 layers A, B and C. I want A to be the mask for B which is pretty easy, but at the same time I want B to be the mask for C. Is that possible?
View 2 RepliesIDE :: Masking In Flash Like In Photoshop?
Apr 7, 2009Is there a way to make Flash work with masks in the same way as in Photoshop?In Flash, for a mask layer to work, it needs to be in shades of transparency.In Photoshop, you can use a fully opaque mask layer, and the mask is applied by using the different shades of black and white.
View 1 RepliesAS3 :: IDE - Masking The Image For A Transition
Apr 14, 2009I'm extending a tutorial from Flashtuts by Michael Chen. My goal is to have the grid fill in random, masking the image for a transition, as the famed Mask Effect transition from Flash-filter. This is what i got so far: URL]
[Code]...
IDE :: Masking An Image Loader?
Jun 10, 2009I'm coming from AS3 and I'm trying to mask a SWF file that's being imported in but it's doing something pretty funky. The SWF file is coming in fine, but when I'm masking it, it shows the shape I'm masking with, but it's also masking because nothing is going beyond its' edges.
{
var mask_mc:Shape = new Shape();
mask_mc.graphics.beginFill(0x000000);
[Code]....
IDE :: Masking The Special Text?
Jun 26, 2009How do I add text effects such as a mask to text that has strokes, or decorated text? I would like to have a masked effect on special type that has a stroke to it.Currently the mask works on static Arial text and when I convert the static text to a movie clip. But the mask doesn't work when I convert the static text to dynamic text.
View 3 RepliesIDE :: Masking A Handwritten Word
Nov 10, 2009I need to create the effect of something appearing dynamically. I have th�s script type font, that I want to have the effect of being written out. So I guess what I need is some tutorial on masking.
View 2 RepliesIDE :: Dynamic Masking Using The Drawing API?
Nov 15, 2009I've been having some trouble with this code:
Code:
onClipEvent(load)
{
_root.stop();
dO = 3.6;
r = 75;
[code]....
I've created a movieclip with a donut graphic.Set the actionscript to the clip. Created a 2nd frame in the timeline with a photo.Nothing happens.
IDE :: Alpha Masking Insanity?
Jan 31, 2010I have gimp. I have flash cs4.I have a picture of a dog that is 200 by 200 pixels with alpha transparency (you only see the dog no background, it's a png).Now I want to make only the dog listen for a mouseclick event. I saw some way of doing this by looking at the point where the mouse click event occured, and then stopping or continuing the event propogation based on if the pixel clicked was transparent or not. This seems sort of hackish. The "Clean" way I propose is by using a mask over the 200 by 200 image, but the mask should be shaped like everything that is NOT the dog. So it's a mask with a hole in the middle. the hole in the middle being nothing. not even alpha. Or the other way if this isn't possible, is to create a 200 by 200 image with just alpha value 0, and then stamp the dog on top as a mask... It appears there is nothing out there that describes how to do this.All I see are "bitmapfill" on squares and circles, which is utterly basic.
View 1 RepliesActionScript 2.0 :: Masking Of A Duplicated MC
Mar 22, 2004I am trying to mask a duplicated mc.
I am attaching my .fla so you can take a look. The code is a bit long, but I marked the setMask code line with dashes (it's right on top). I marked out the setMask line so you can see how it looks like, because when I do mask, you can see any of the MCs that are being masked.
ActionScript 2.0 :: Masking Of A Duplicated MC?
Mar 22, 2004I search my problem in this forum prior to writing this. I got a thread that explains exactly what I needed to know; however, it doesn't work for me...I am trying to mask a duplicated mc.I am attaching my .fla so you can take a look. The code is a bit long, but I marked the setMask code line with dashes (it's right on top).I marked out the setMask line so you can see how it looks like, because when I do mask, you can see any of the MCs that are being masked.
View 3 RepliesActionScript 3.0 :: Masking In Real Time?
May 30, 2009I'm currently using the Graphics library to draw bands of color across an image (bitmap).So, I draw a square of colored bands, and mask it with the bitmap image. Unfortunately, when I use a mask (or even set the blend mode to .LAYER, OR use a shader filter) the FPS drops to un-usable levels.Is there some way that I can draw the bitmap shape I want without killing the FPS? I was thinking that I could like, draw the bitmap on top of the sqaure of Graphics, and then make a certain color transparent.
View 7 Replies
