Professional :: First Layer Contents Disappear When Pressing F6 On Second Layer?
Jan 11, 2010
I want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 Replies
Similar Posts:
Aug 26, 2011
Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 Replies
Feb 11, 2010
I can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 Replies
Oct 12, 2009
I'm customizing an xml flash website and while I can handle all the html and xml well enough, but in Flash, I have no clue how to:
Now go on the stage, and delete the contents of the last layer(background & pattern). Here, add from the library, the square movieclip, and name it mcBackColor(see attached image).And then to add your swf background in the "background & pattern" layer from the main.fla file.
I can change the name, but don't know how to delete just the contents of the layer and then add the new clip.I've made a slideshow before and that's all I can do.
View 1 Replies
Nov 19, 2009
I am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 Replies
Aug 9, 2010
Im creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
View 5 Replies
Mar 22, 2012
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 Replies
Aug 17, 2010
I have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
View 10 Replies
Nov 5, 2009
I'm trying to do a little comic comedy type video in Flash. I've done an outline sketch with the pen tool of my first character, now I want to color it BUT I want to keep the colors and the outline sketch separated on two different layers. Is there a way I can select the path (outline) on layer A and then colorize it with the bucket tool on layer B? The problem I'm having is that every object I select it automatically jumps to that corresponding layer.
One reason why I want to do it this way is I still want to continue working freely on the outline sketch since it's not fully finished, so that I just can blend the colors out and keep working on the outline, at the same time I want to color it while I go just to see where it's going and to make sure that I'm not wasting my time unnecessarily with trying to do a outline just to find out that it won't work out at the end.
how to do a comic type animation, how to create the characters, how to make them move and talk? It can be a free or paid resource.
View 2 Replies
Dec 12, 2011
Why this code doesn`t work?
tip_052.addEventListener(MouseEvent.MOUSE_OVER,ove rSub);function overSub(evtObj:MouseEvent) {
tip_052.visible = true;
else[code]....
appear this error "Scene 1, Layer 'Layer 3', Frame 1, Line 291083: Syntax error: else is unexpected.
View 5 Replies
Jul 27, 2004
this is the END of the code:
this.createEmptyMovieClip("pos", total);
pos.moveTo(radius.b, 0);
pos.beginGradientFill("radial", [0xCCCCCC, 0x999999], [100, 100], [0, 255], {matrixType:"box", x:-radius.b-radius.b/2, y:-radius.b-radius.b/2, w:radius.b*2, h:radius.b*2, r:0});
for (var radians = 0; radians
I get a error for the last line. The error is this:
**Error** Scene=Scene 1, layer=Layer 1, frame=1:Line 11: ';' expected
for (var radians = 0; radians
I cant get it working.. I have flash mx 2004 pro..
View 2 Replies
Oct 22, 2008
Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 Replies
Dec 15, 2010
I have a large library that I am organizing of vector only files, some imported from Illustrator.
When I re-name some of the items other Movieclip items in the library lose their contents and all that is left is an empty symbol.
I repeated this several times and tried to find workarounds. Like duplicating the symbol. This worked for the one item but then it deleted another symbols contents.
View 7 Replies
Jan 27, 2010
I'm new to Flash and can't find if there is a way to get to the next/previous keyframe on a layer by using something faster than dragging the playhead.
View 8 Replies
Apr 15, 2010
can you copy the armature layer and past it on the same layer to make longer?
View 2 Replies
May 29, 2010
I have a swf with two layer which both show when playing the animation in the flash timeline editor environment but when played in the preview or published one of the layers isn't shown.
View 2 Replies
Jun 21, 2010
I seem to remember reading that you shouldn't do it.I was mad at Flash CS4 and CS5 because I wasn't able to make the animation work like After Effects, as far as animating something, having it rest, and then animating it again. I know you can do this already, however, if you add easing you could mess yourself up as the ease gets applied to the entire tween. I wanted to be able to tween something with an ease, then let it rest, then tween it again, again with an ease.
Tonight I discovered this: Place CTI over last frame of first tween, select object, copy. Go to next "slot" and Insert Blank Keyframe, then Paste in Place the object. Make some more frames. Then after it all make a New Keyframe (content from preceeding keyframe gets copied into it, then add more frames, select them and Make Tween. I now have 2 tweens on the same layer, each with their own easing that can't get stretched out of place.However, when I did this I noticed, before making the second tween, that I was not able to just click the object and Make Tween from there. I had to actually make regular frames and convert them
View 1 Replies
Jun 25, 2010
What is the quickest way to take a movie clip off of one layer and onto a new layer made below it. I need to keep its location on stage exactly the same. I am currently selecting it, jotting down its x and y position, then dragging it out from library onto the new layer and setting it to these coordinates, but if I could do this another quicker way, as I have quite a few to do, it would make life easier.
View 3 Replies
Aug 10, 2010
Does anyone know of a plugin that when creating a new layer, the name of the layer is immediately editable or which brings up a dialog window prompting you to name it, as in photoshop and illustrator?
View 2 Replies
Dec 4, 2010
I want to know how can I mask an image on one layer which should enogh for other movie clips. Like the following ...
1) First layer ........................ Actionscript
2) Mask layer ....................... Rounded rectange with some design
2) Image layer ...................... Best image (as a background for all other movie clips)
3) Movie Clips layer .............. 10 Movie clips (which are like slides and will be act like one webpage each)
What I want is the mask layer (Layer 2) should be enogh for all the movie clips in layer 3. No need to mask in each movie. I tried in the same sequence but it did not work for me.
View 1 Replies
Dec 5, 2010
I'm using Adobe Flash CS5, ActionScript 3.0. I've created a simple file with a few animations. When I press enter, the movie animates perfectly on the stage. But when I press Ctrl+Enter to view it in test mode (and when I export to SWF), one of the five layers just doesn't appear. It's as if I never created the layer! What could be causing this issue[URL]
View 4 Replies
Dec 15, 2010
I bought a web template and have been working my way through the included FLA file (using adobe flash professional css). I have figured out how to do most things but am stumped with one of the movies clips. If you go to the site you will see the image slideshow. The text I am trying to modify is the bottom right box. I was able to change the first round of text which I found in a movie clip called obj 12. The problem is the I cannot find the text after that "Perfect solutions for every space" and so on. I have all the layers visable for obj 12 (everything under the eye is unchecked) and everything under the lock is unchecked. I see layer for the two lines of images which I was able to change but then there are no other layers for the other text. I went through every image/clip in the library
View 3 Replies
Jan 12, 2011
I'm a games design student from the UK I'm currently working on a music project. for this I want to create a soundboard where the user can select a multiple number of files and then play them as one track, my plan is to record background, rhythm, melody and random event tracks and have the user select one of these elements from each bank of samples and have a button for them to hear the outcome.So far i can get the soundboard elements to work, but no matter where i look or who i ask no one seems to know how to make this idea work, someone suggested using an array but when i started looking at arrays there seems to tutorials on creating them but not implementing them.
View 2 Replies
Mar 7, 2011
I have a layer with a bullet (graphic symbol) that flys out from the right and stops mid- stage, I am trying to copy this layer and have it do the same thing 3 times, to make 4 bullets that will be the BG for 4 text buttons I will make later, but I want to stagger their timing so they go with a sound effect.I am essentially trying to do exactly like the Duplicate Layer command in After Effects. Is there anything like this in Flash? I have even tried to do the more time consuming process of dragging another instance of my symbol from the library, but I keep getting the message "Do you wish to replace the existing tween target object", which also happens if I try to copy and paste the symbol.
View 3 Replies
Dec 12, 2011
This has been a complaint since CS4. Maybe you finally fixed it in CS5.5? I'm in CS5, and cannot copy a group of layers with the "copy frames" option as I would with any other layer(s). So a bone tool animation I've done on the main timeline cannot be copied and turned into a mc symbol. A simple, basic process. I can export my MC and import, then it comes in as stills, increases file size, not editable. I'm sure the answer is "plan ahead." The answer should be, "Of course you can do that, that's always been a normal method of working in Flash." Flash is dieing as a web tool, and falling short as an animation tool.
View 1 Replies
Apr 4, 2012
its been a while since ive used flash,and im struggeling with a command id normaly do within seconds.im trying to add a stop action on one of my layers,i know the action script is stop ( ) ;but i cant recall how to add it only to the particular layer. im affecting the whole scene when i add a new layer and do the action.
View 3 Replies
Apr 10, 2008
I have created mask layer with single MC cosisting of couple of instaces of another MC. This is a set of growing squares. The problem is that only first instance gives mask effect. Rest of instances are not used to. Does anybody knows what is wrong and how to workaround this (most likely)bug ? I would like to avoid creating one masking MC consisting of e.g. 100 layers - with teened growing sqare on each layer but in different position. Wiser is just to create one MC consisting of many instances of another single MC.Second example describing issue.Mask layer contains shape tween which consist of 3 keyframes.Masked layer contains single keyframe at first frame with one MC. This MCrestarts when middle keyframe in the mask is played. It seems that masked MC (on different layer obviously) is recreated when playhead meets keyframe in mask layer in tweened shape. In the same moment our MC stopped beeing visible for AS3 under given name as well.It seems that if mask layer contains more complex animation then basic shape move/scale then masking stops working properly. Is it bug in Flash palaer or am I doing mistake?
View 3 Replies
Jan 6, 2010
I thought from other adobe products that the lock would protect any layer you put it onHowever, In a situation where layer 1 is a looping background.Once setup, I locked itNow working on layer 2 but I notice unless I'm very careful I'm still able to move the background (layer 1) while working on other symbols that go on top of background. (even though the lock is in place.So I thought well what good is that, so hide the layer
View 4 Replies
Jan 28, 2010
We have about 600 flash animations on our website. They took many years to create, and we now wish to protect them by adding copyright message in the bottom right of every one. For example: (C) ACME
Is there some way to do this automatically? This will save many days/weeks of repetitive work.
View 4 Replies
Apr 1, 2010
I have a template that I am editing. I have created new layers by duplicating an existing layer. The problem I am having is that anytime I make a change to a duplicated layer it changes the original as well. ie if I attempt to edit the action script on the new layer it changes the action script on the original? It seems as though they are linked and I can not find a way to unlink them??
View 1 Replies
