ActionScript 3.0 :: Possible To Add Layers / Re-order Layers / Move Movieclips From Layer To Layer
Oct 22, 2008
Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 Replies
Similar Posts:
Dec 4, 2010
I want to know how can I mask an image on one layer which should enogh for other movie clips. Like the following ...
1) First layer ........................ Actionscript
2) Mask layer ....................... Rounded rectange with some design
2) Image layer ...................... Best image (as a background for all other movie clips)
3) Movie Clips layer .............. 10 Movie clips (which are like slides and will be act like one webpage each)
What I want is the mask layer (Layer 2) should be enogh for all the movie clips in layer 3. No need to mask in each movie. I tried in the same sequence but it did not work for me.
View 1 Replies
Feb 7, 2011
How do I apply a layer mask to every layer in my movie? After I highlight all of the layers and put them in the layer mask, the layers that are in folders will not go in the layer mask.
View 2 Replies
May 25, 2003
How to let a layer play independent of other layers?
The whole movie is looping but I want to be able to let one of the layers [frames] play only once upon first visit.
View 2 Replies
Jul 26, 2010
I am creating a touchcreen (LCD) for a property development.We I am having a problem is on the interactive map.Picture a map with icons all over it.When you touch the icon a image of that area of the map pops up.you then click on a X on the top right to go back to the map.I have probably dont this incorrect and those only because I dont have much knowledge.I have create the map on the lowest layer.The icons (same graphic - eye) are on there own layers.I converted the icon to a BUTTON and added the pop up on the DOWN.The problem I have is when you touch the icon on a layer other than the top layer the top layer icon shows on the screen (ontop of the popup).
View 2 Replies
Oct 15, 2010
I am working on a simple art scroller that will scroll images across the screen. It is very simple but my problem is that when I try to use NavigateToURL certain layer/instances will not work unless they are placed on top of the other layers (except AS layer). Other layers seem to work perfectly fine under the other layers. All in all I have approx. 15 layers all with one piece of art, instances at all keyframes and a actionscript layer on top.
[Code]....
View 2 Replies
Aug 1, 2011
I want to create multiple layers where each layer has some graphics and buttons on it. I am using Flex so I like to do this using actionscript.
Does anybody know how to create a layer in actionscript?
How do you attach these layers to your stage?
View 4 Replies
Jun 3, 2010
i want to collapse a complex scene with all different layers and different transparency into a single layer (or as few as possible) to optimize the flash file for online (were experince proformance issues). I have tried the combine and manually copying pasting into one layer but it cuts the fill below and replace with transparent fill. I want to have a end file that is 100% solid.
View 1 Replies
Mar 21, 2011
I have an asset file (FLA) that will be updated a lot by other team members during the project. I would like to have an JSFL script that moves all selected movieclips in the timeline to a new layer (named using the movieclips library name).[code]...
View 1 Replies
Aug 17, 2010
I have a container MovieClip called Drags where I can drag stamps (other MovieClips)--they are added to the Drags container via addChild. I have a second container MovieClip above that one (display order-wise) call Paint that contains a bmp, and some sprites used for adding a layer of paint.
My question is this: I need to be able to click on the Paint layer when I am above a draggable MovieClip and trigger the MouseEvent for the correct object to drag it around, but the item must always remain below the Paint layer.
View 10 Replies
Aug 26, 2011
Don't know if the flash layer on the view stack contain only the compiled flash swf file
View 1 Replies
Nov 24, 2011
I'm making an interactive book and I would like to make my "Text"-layer invisible when I start the "Turn Page"-animation. It's either that, or I'm gonna have to put a code for EVERY 23 MoveClips with the Texts in them, since I'm using the same "Turn Page"-button.
View 2 Replies
Oct 5, 2010
Is it possible to change the order of layers in a Flash MovieClip timeline using ActionScript 3?
View 1 Replies
Sep 6, 2003
is there any way to switch the stacking order of layers during a movie clip. ctually i want to do it with an on(release) action.
View 4 Replies
Sep 10, 2005
the snow effect always acts like the top layer, ok what i mean is, i have 3 layers, (1)toplayer= a car, (2)middle= snow, (3)low= background.I want to make the snow to be seen behind the car...i hope you understand what i mean , whenever i put the code from the link above it acts as the top layer and appears in front of everything.
View 4 Replies
Jan 17, 2012
I am starting to learn how to use Flash. I am trying a simple exercise of creating text, breaking it apart, then distribute the objects to layers. When I do this, the layers in the timeline box appeared not in order, intead of Top to Bottom, the letters appeared Bottom to Top (See attached picture).
View 2 Replies
Aug 27, 2009
I was wondering is it possible to move layers into another layer. Can I copy movie clip from one layer and paste them into another layer some where else?
View 2 Replies
Nov 19, 2009
I am doing some research on creating clcikTags. I read a few places that the clcikTag should be on the top layer. That has been fine, but now I want to loop it and I usually put my actions in the top layer. Will this cause a problem? Am I better off just putting my loop action on the last key frame of the clcikTag layer?
View 3 Replies
Aug 9, 2010
Im creating a program that is designed to allow the used to select 3 pictures (movie clips) and print them off on a single peace of paper.
The program works by allowing the user to select 3 graphics (the graphics are actually instructions for various exercises) and then moving the desired movieclips onto the stage. This all happens on a layer named "Content"
So far the program will allow the user to select the movieclips and will move them into place on the Content layer as well as move smaller versions of the pictures into a preview box the only thing it does not do is print. (the most important bit)
View 5 Replies
Mar 22, 2012
Is it possible to create multiple layer masks over a single layer using Actionscript3?Below is the flash effect I wanted to create with masks.First it starts from A and goes to B and C simultaneously.Then from B it goes to H and D simultaneously (the same applies to C).This is how the end result will look like.ps. I need my background to be transparent. I'm embedding it into a web page later.
View 2 Replies
Jan 5, 2004
Is it possible to have movieclips, on two seperate layers, both located on the first frame of their layer, to have an AS where when MovieClip1 reached frame 5 of the movieclip MovieClip2 goes to frame 5 of its movieclip but MovieClip1 continues to play even though the AS was triggered?
View 4 Replies
Nov 21, 2011
Is there any method with which I can get to know which of the two movieclips I'm using is lying above or below in the timeline 'layer' arrangement in flash.
what I'm asking is if have two movieclips 'a' and 'b'. One in layer 10 of timeline of flash professional and 'b' on layer 1. Will be able to change the index order using pure as3 code to visually keep the movieclip on the 10th layer on top of the movieclip on 1st layer?
View 3 Replies
Jun 10, 2009
I am having a problem with a flash piece that I created. I don't understand why it is doing what it is doing. I am new to flash but I have been developing software and database applications for over 10 years.I am trying to make a horizontal scroller piece that reads in data from an xml document. So basically the XML has properties of image, title, and link, I then load the images and titles into an object spaced out properly and link the image to open a new window when the image is clicked. I have 4 layers:
1. Actions
2. Buttons
3. Layer1
4. Scroller
The buttons layer has 2 buttons on it, one left aligned and one right aligned. When you mouse over the buttons, the images in the scroller move the direction the button image is pointing. The Scroller Layer has an object of type scroller (which i made) and that scroller instance name is scrollerbar.In actionscript I use a sprite object to load the image and then use scrollerbar.addChild(photo) to add the sprite into the scrollerbar. Then I set it's width, height, x and y to be in the correct position.Now when this first runs, it works displays 6 images and titles and they are linked, and has a button on the left and right. When I mouseover either of the buttons, everything gets moved to the right, the buttons, the scroller, and all the images inside the scroller. So the left button is no longer against the left side, and you can hardly see the right button because it almost gets pushed outside the viewable area.Can anyone explain why everything is getting pushed over like that? It only happens the first time you mouse over a button, subsequent mouseovers of either button do not cause this to happen again.[code]
View 2 Replies
Oct 11, 2011
if there is an option to refer to a layer as a named object. so if I have a layer named 'myLayer' I can to control about the alpha amount, for instance, of all the objects (symbols, movieclips etc.) that inside this layer or to move all those objects together as a one unit by some pixels.
View 5 Replies
Feb 11, 2010
I can't seem to go to a master edit file that is supposed to show both the body (layer 1) and wing (layer 2) of a flying bird animation. Is there a way to merge these two since I'm planning on shrinking it down and making a lot of birds?He merged the two layers at 14:24 of the video without even explaining how he went to this so called "Edit Master Movie Clip" that seems non-existent on Adobe Flash CS4.
View 1 Replies
Jan 11, 2010
I want to create a simple mask. A white oval on a second layer on top of a bottom layer that just has a word of type. I want the oval to travel from the upper left down to cover up the type. When I create the second layer, create the oval, and choose a distant frame for the "end" of the oval's positioning, my type in the first layer disappears as soon as I press F6 on that second layer. Why? Why is it nuking my first layer?
View 3 Replies
Dec 7, 2009
My main scene in only on 2 frames. On the second layers I have some buttons that activate my movie clips (on the third layer)... These buttons can be pressed 'randomly' and after the muvie clips are played my buttons (one by one) disappear to reveal what on the first layer. Here there's another button, but I want it to be active only after all my movie clips have been played. What kind of ActionScript should I use to tell flash to go to the second frame of my time line (where my button on the first layer is active) only after all the mcs have been played.
My file at the moment is in AS2... This should be a second part of a game. People who arrive at this stage should now which are the right buttons to press. If they press the right one a pop up opens and some buttons disappear to reveal the massage that's behind. When all the right buttons have been pressed I need to play the frame 'end' on my timeline... The attached fla is an example of mine animation the right buttons are the red ones.
Attachments:
example.swf (14.1 K)
example.fla.zip (269.8 K)
View 1 Replies
Jan 15, 2010
I have 3 movie clips on the stage in seperate keyframes: mag1, mag2 & mag3
trying to bring each mc to the top on mouse over.
mag1.addEventListener(MouseEvent.MOUSE_OVER,up, false, 0, true);
function up(evt:MouseEvent):void{ setChildIndex(MovieClip(evt.target), numChildren-1)}
[Code]....
View 1 Replies
Oct 23, 2011
I created two empty Sprites to serve as layers, bottom_spr and top_spr. When clicking a button, a MovieClip appears and follows your mouse, until you click, then its position is fixed. As soon as the button is clicked, I addChild the MovieClip to the correct Sprite. Unfortunately, the layer system doesn't see to work, because they are layered in the order I place them, the Sprites don't seem to influence it. How is this possible?
private var ground_spr:Sprite;
private var units_spr:Sprite;
public function Game() {
addEventListeners();
ground_spr = new Sprite();
[Code] .....
View 1 Replies
Nov 15, 2009
I have two copies of an image (one called blurPic_mc & one called sharpPic_mc) and I want to be able to move both of them around the screen togethe I need them to stay exactly on top of each other for some other functions I am running but right now the only one that moves is the top one (sharpPic_mc).I included my code below.
sharpPic_mc.addEventListener(MouseEvent.MOUSE_DOWN,Click);
sharpPic_mc.addEventListener(MouseEvent.MOUSE_UP,Release);
function Click(event:MouseEvent):void{
[code].....
View 1 Replies
