ActionScript 2.0 :: Changing Stacking Order Of Layers?
Sep 6, 2003is there any way to switch the stacking order of layers during a movie clip. ctually i want to do it with an on(release) action.
View 4 Replies
Similar Posts:
ActionScript 2.0 :: Changing Stacking Order (swapDepth)?
Jan 25, 2006I've been following the Changing Stacking Order (swapDepth) tutorial but there's something I'd like to know.In this tutorial, we have 3 buttons inside 3 Mc's. Each Mc is called green, yellow and blue.The AS code for each button is:
Code:
on (press, release, dragOver, dragOut) {
x = 0;
x = x+2;[code]....
What I would like to get is that the MC (window) that I click, goes to the top, BUT respecting the relative position for the others. I mean, in this tutorial, if you run the swf file and put every window a bit one over the other, and click the bottom window, it will come to the top, but the other two won't keep their relative position because the clicked window will be swapped with the one on the top. Understand? (it's very simple although difficult to explain).To make it easier: let's imagine we have 3 papers on the table and I pick up the one in the bottom and put it on top....this is exactly what I want (but in this tutorial, the other 2 papers are moved aswell). I just want that the window I click gets on top of the other 2, nothing else.
According to Kirupa's words, this EXAMPLE here is done using swapdepth aswell, and IT'S EXACTLY the behaviour that I want. Just compare this one with the one in the tutorial and see the different window behaviour.The thing is that I don't know how to do this with "swapdepths". In the AS reference bok it says it can be done but (as usual) they don't tell you how to do it...
ActionScript 2.0 :: Changing Stacking Order - Swap Between Images
Dec 21, 2004I have an FLA with a section in it where I need to swap between images (one over the other and so on, which I have done using swap depth) what I want to know is if there is a way to make the transition from one pic to the other smoother by using alpha from 100% to zero, thus revealing the picture beneath.
View 3 RepliesActionScript 2.0 :: SwapDepth Of MC's With Buttons (flash5) - Changing Stacking Order
Dec 27, 2002I know, there is a tutorial about changing stacking order [URL], but the makers were so kind to use Mx files for the .fla's.
[Code]...
When I click one of the 4 buttons, the image related to that button has to move to the hightest position. And ofcourse the previous highest one should be the one under the new highest image. Well, I tried to fix the script, but for some reason it gets all confused and starts switching images, and sometimes none.
IDE :: CS4 Stacking Layers?
Mar 22, 2011I've made my site with photoshop and all images are in *.*png, saved with transparency and in the same resolution 1000x750. I exported them into my working file in Flash. No problems here.I've started to put each of the images in separate layers and in stacking order I wish, still no problems.Now, I am about in 20th layers I am inserting the image, again in separate layer and what happened? The layer will cover over the layer which is almost at the bottom. Meaning...only the trasparency which is very strange.
View 3 RepliesStacking Several Masking Layers Do Not Work
Jul 31, 2009The attachment contains two screen shots of a movie clip timeline. The images consist of a text mask symbol sliding diagonally other a text layer, and a picture button sliding to the left under an aqua blue mask. When I scrub the timeline -- things work great. But when I view the movie via the control menu, the dynamic text is not displayed. The images illustrate the masking layers in unlocked and locked mode.
I'm using CS4.
Attachments: masking.jpg (136.8 K)
ActionScript 2.0 :: Sending MC's To The Back (stacking Order)?
Jan 28, 2004Basically I have a little app where a pop up palette contains dragable movie clips that then are placed on the main stage. However when the palette pops up for a second time it remains behind the placed movie clips. The clips have to be on top of the palette initially, but something like on release swapDepths?
View 14 RepliesActionScript 2.0 :: Overlapping Menus In CS3 Stacking Order?
Oct 23, 2007I've been working with this file for quite some time now. I have several buttons in this file - for example, general information. From this button (actually mc, using hittest to function as a faux button), another menu springs out. This menu overlaps the button underneath it.
The problem I've been having is that, when the submenu pops out, the user is still able to activate the buttons beneath the submenu (it overlaps the other "main" buttons).
My solution was to "hide" the movieclips that are overlapped by the submenus, like this:
[Code]...
ActionScript 2.0 :: Sending MC's To The Back (stacking Order)
Jan 28, 2004Basically I have a little app where a pop up palette contains dragable movie clips that then are placed on the main stage. However when the palette pops up for a second time it remains behind the placed movie clips.
The clips have to be on top of the palette initially, but something like on release swapDepths?
ActionScript 3.0 :: Change Stacking Order On Display List?
Nov 3, 2009I have a series of mc's that I'm adding to the a display list of "theContainer".
I've set up my code so I can click any mc in that list and make it "selected". I can then, with controls outside "theContainer", change the selected clip's scale or alpha, etc.
I'd like to set up 2 buttons outside that display list so I can change the stacking order of those clips in "theContainer".
So if I add clip "a" to the display list, then add clip "b" to the display list then add "c" and "d" and "e and "f" to it, I want to be able to move any of those clips forward or backward.
ActionScript 3.0 :: Change The Stacking Order Of Display Objects?
Jul 10, 2010How do I change the stacking order of Display Objects in AS3? I have a semi-transparent caption box that is supposed to be on top of externally loaded images. no matter where I place the script for that box in the code, the images always load on top of it.
View 5 RepliesActionScript 3.0 :: Relative Stacking Order For Added Children?
Nov 16, 2011I'm producing some animations that have movie clips introduced by a video player cue point handler.The video is on a given layer in the timeline scheme. When one uses addChild(); to introduce a movie clip, is there some way of specifying what layer it should appear on? Otherwise, is there a way of controlling the stacking order of the various components on the stage?
View 4 RepliesActionScript 3.0 :: Flash - Change The Stacking Order Of Objects??
Mar 13, 2011Is there a way to use actionscript to change the stacking order of objects?I run two functions when i start my game, one that adds the player and set it's properties and one that generates the map. The add player function is run last so the player will appear above the map, the problem is that i have some objects on my map that i would like to appear infront of the hero, like certain tree's for example.
Is there a way i can make these objects appear infront by using actionscript? Using different layers won't work as everything is generated dynamically.
ActionScript 3.0 :: Possible To Add Layers / Re-order Layers / Move Movieclips From Layer To Layer
Oct 22, 2008Is it possible to add layers, re-order layers, move movieclips from layer to layer or specify which layer a duplicate movieclip appears on at runtime with AS3?I am aware of the depth properties and the functions associated with that but it would be easier to have a concept of a layer because I am dealing with masks.I have a nasty feeling I'm gonna be told that layers don't really exist within an swf and that depths and setmask are all there is to work with.
View 4 RepliesActionscript 3 :: Trace "depth" Or Stacking Order Of A Display Object?
Mar 24, 2011How can you trace the "depth" or stacking order of a display object with AS3? I'm trying to figure out if my sprite is behind another sprite.
View 4 RepliesChange Order Of Layers In Flash MovieClip
Oct 5, 2010Is it possible to change the order of layers in a Flash MovieClip timeline using ActionScript 3?
View 1 RepliesProfessional :: Break Apart Letters - Distributed Layers Not In Order
Jan 17, 2012I am starting to learn how to use Flash. I am trying a simple exercise of creating text, breaking it apart, then distribute the objects to layers. When I do this, the layers in the timeline box appeared not in order, intead of Top to Bottom, the letters appeared Bottom to Top (See attached picture).
View 2 RepliesFlash 9 :: Layers Position Changing And Disappearing On Test
Sep 24, 2008Im new to flash and doing my best to teach myself.Im using CS3.I've already been working on this project for a while, and I don't know why this is all of the sudden happening.I have a text graphic that I want to create a motion tween with.I created a new layer for it, and drug it to the stage.If I tested the movie at that point, it looked fine and didn't move. If I tried to move the original keyframe, or added a motion tween, it would look fine when I played it on the stage, but when I go to "test movie", its either not on the screen at all, or its in a totally different position.
View 1 RepliesChanging Order Of Movieclips On Stage?
Nov 21, 2010I have some movieclips on my stage that are there via timeline. I also add movieclips on stage using addChild.
What is the best way of changing the order of the movieclips because they overlap sometimes? eg.
mc_a is on the stage already
mc_b is called on stage using addChild
Can I change the order of mc_a using script even though it was already on stage?
Can I remove mc_a off stage using script?
How do add mc_b under mc_a so that mc_b does not overlap mc_a?
ActionScript 3.0 :: Changing The Rendering Order?
Jun 25, 2009Imagine I had the movieclip structure below... root - mc1 mc2 - mc3 mc4 - mc5 - ... - mc6 mc 7Where my root has two children (mc1 and mc2), mc2 has two children (mc3 and mc4), etc... So taking mc6, it is a movieclip an arbitrary number of levels down the movieclip hierarchy.
I want mc6 to render as though it were a child of mc1, ie. before mc2 and its children. However, if I simply use addChild(), I would remove mc6 from it's current position in the hierachy, thus changing the transformations which determine it's position on the screen. I simply want to change the point in the order at which it is rendered to the screen (render it before all other clips), but NOT change where it is in the spatial hierarchy (in order to preserve animations etc).
My current way of doing this, is to set mc6 to visible=false. Then I add a bitmap to mc1. Then each frame, I wipe the bitmap and render mc6 to the bitmap using its localToGlobal transformation. However, this is a very wasteful solution since the bitmap needs to be the size of the screen which results in the entire screen being redrawn every single frame. I'd like to retain flash's built in optimizations for only redrawing changed movieclips.
Another way would be to duplicate the mc6 movieclip, and attach the duplicate to mc1 as a child whilst making the original clip invisible again. However, then I would have to update the new movieclip with every single possible change which could occur to the original mc6 - this would get complicated pretty quickly.
Professional :: Changing Slide Order In Timeline
Nov 8, 2011I have been shown how to do a very specific task in Flash Pro CS5. I have five slides in my timeline, with buttons that include links to product pages on our website. These five slides comprise a movie, with each slide being displayed for a few seconds and it repeatedly cycles through the five slides in a banner at the top of our home page. In addition there is a navigation bar below my slide images with a play and pause option, plus the five slide numbers so the viewer can navigate from slide to slide manually. I have been asked to change the order of the slides so that slide #5 now becomes slide #1 and slide #1 becomes slide #2, and so on.
I can easily switch the images and links so that the slides are in a different order in my file, but now the navigation bar below does not work. In the Actions panel, the #1 button in the navigation bar still appears to be linked to slide 1, which now has the new images, yet the nav bar does not respond to clicks anymore. How was my nav bar disabled when I switched the images and links around between the slides? and how can I correct this? I know nothing else about Flash except how to replace the images and change the button links in each slide, which I do monthly, as this is the top banner on our website.
Changing Order When Loading Images In As AddChild On Stage?
Jul 30, 2010I have a movie on stage that acts as a button using the code. person_mc.buttonMode = true;
I load an image onto the stage from my library using addChild(holiday);
What happens is that the person_mc button I have on stage will not function anymore, because I am presuming it is underneath the holiday pic when I loaded it using addChild.
How do I load the holiday pic, so that it is underneath the person_mc?
I know I could do what I did with holiday using addChild for the person_mc, but I do not want to do it that way.
ActionScript 2.0 :: Changing Tab Order Of Text Input Boxes
Mar 27, 2005How do you change the TAB order of text input boxes. I want to tell it what box to go to next depending on which one it is on now making a login form ..
View 2 RepliesFlex :: Changing Order Of Font Managers When Compiling Argument?
Jul 22, 2009I've recently had the need to use the managers compiler argument, because the project had an Open Type font embedded, and was generating errors at compilation. Now I need to use the same argument in my ant task, but for some reason it doesn't work. I'm using Flex SDK 3.2.
The task looks something like:
<mxmlc
file="${main.class}"
output="${swf.export}"
actionscript-file-encoding="${ENCODING}"
keep-generated-actionscript="false"
[Code] .....
I've tried different variations, from using manager as a child element of mxmlc, to using it as an attribute, and combining it with prefixes (fonts, compiler.fonts). I've also tried to use it as sub-element of the element fonts, but nothing worked. I've considered using a shell task instead, but I'd rather not. For now I've changed flex-config.xml in the frameworks directory of the sdk, and it seems to do the trick, but I'm thinking there's got to be a way to do this in the task. Any exact elements I need to add to the task to make it work, without having to modify "flex-config.xml"?
ActionScript 2.0 :: Action Scripted Layers Always Act As Top Layers?
Sep 10, 2005the snow effect always acts like the top layer, ok what i mean is, i have 3 layers, (1)toplayer= a car, (2)middle= snow, (3)low= background.I want to make the snow to be seen behind the car...i hope you understand what i mean , whenever i put the code from the link above it acts as the top layer and appears in front of everything.
View 4 RepliesActionScript 2.0 :: Creating An Order Form For Flash Site - Results Of The Order Sent To A Pre-specified Email Adress In A Certain Format?
Aug 17, 2004I am creating an order form for my flash site. I have never done this before in flash but I have in visual basic. I have a few questions:
1. Is assigning variable names to checkboxes and radio buttons the same as in visual basic? I mean i know that you probably assign them in the properties. ex..say i name a radio button 'radio1', to run a check in my actionscript whether radio1 was checked or not would it be something like if(radio1){}
2. After the person fills out the form I would like to have the results of the order sent to a pre-specified email adress in a certain format. What would be a good way to do this?
Sorting Number Ascending Order And Descending Order?
Jun 15, 2010sorting number Ascending Order and Descending Order tutorial with out useing sort property[Array sorting like 91,3,5,4,6,8,3,6,1,0]
View 6 RepliesAscending Order And Descending Order Array Merge
Jun 16, 2010[code]how to do Ascending Order and Descending Order this array merge(don't use sort property)
View 1 RepliesActionScript 3.0 :: Re-order Array In Ascending Order?
Mar 20, 2009I have an array, and I add info dynamically into it. I need some way to re-order the array into ascending order.
Another thing. How can I add a value in the first position of the array pulling keeping all the other values jumping to the next position.
IDE :: Load And Unload Swf W/ Flv W/out Stacking?
Nov 20, 2009I want to load and unload EXTERNAL SWF that contains FLV on mouse click. Loading and unloading the swf is NOT the issue. The problem is how do i get the external swf which contains an flv to stop playing and stacking up on each other.
I can load and unload the swf's as long as I pause the videos before I click on another thumbnail, but if I click on another thumbnail while the external swf is playing it's flv, the previous flv keeps playing and stack up under the newly loaded swf.
[Code]...
