ActionScript 3.0 :: Adding Flash Player 11 Support To Flash Pro CS5 And CS5.5?
Nov 2, 2011[URL].. by Rich Galvan @Adobe MXP has been released. I tested on CS5 and seems to work [URL]..
View 4 Replies[URL].. by Rich Galvan @Adobe MXP has been released. I tested on CS5 and seems to work [URL]..
View 4 RepliesI'm trying to make a new flash player to stream a video from the vod folder. But after creating the player, the video doesn't show. It only shows the a blank screen with the player skin.
what's the format to put in the RTMPE url into the source/content path?
Flash Player 10.1 published with creative new features including filters & effects, text, native device interactions, support for multitouch, gestures, mobile input models, accelerometer input and periodic timer, etc. Among them all, the introduction of periodic timer is the most innovative and significant one. This new feature functions as a double-edged sword which, on one hand, can lower CPU utilization and save battery life, on the other, it may cause troubles for some SWF converters to capture the flash content under such extremely low frame rate.
View 1 RepliesWhy doesn't ARM 11 or earlier support Adobe Flash player (Android version)?
View 2 Repliesi don't understand flash plugin only support .swf file,not support .flv file? always require load a swf file for play flv file, for exampes:
<embed type="video/x-flv" src="http://www.my.com/test.flv"></embed>
must be use a swf for play
<embed type="application/x-shockwave-flash" src="http://www.my.com/player.swf" flashvars=""></embed>
I currently have an HTML website but add some music.The specific type of music player I want looks a lot like this:[URL]It seems that it is flash based.how I can find the proper code and steps in adding this to my current HTML based website? Is it even possible since my site is not a flash site?I adore this music player but I'm not sure how it would work and where I can find the proper information on either downloading it or coding it into my website.
View 1 RepliesI've been constructing a flash video player from scratch using tutorials online, and I cannot figure out how to add a timecode (elapsed time/total time) or a way to have a pre-roll video. I'm using flash cs4 and AS3.
View 1 RepliesI'm working on adding a small preview video player to a flash project I'm creating. I've successfully created an actionscript 3-based video player before, so my code is pretty much adapted from that. However, though the code executes successfully (seemingly), I can't see the video anywhere.
Code:
private function buildVidPreview(page:Array):void {
vidPreviewa.x=stage.mouseX;
Tweener.removeTweens(vidPreviewa);
Tweener.addTween(vidPreviewa, {alpha:1, time:1});
setupPreviewVid(page);
[Code] .....
i need code for swf player.the player consists of play, pause ,stop, next and previous with seek bar and time control.i had try my code which not support my swf ......the code is
function swfLoadedHandler(e:Event):void {
trace("swf loaded");
currentSWF=MovieClip(swfLoader.content);
[code]......
i need code for swf player.the player consists of play, pause ,stop, next and previous with seek bar and time control.i had try my code which not support my swf.[code]
View 3 RepliesI have created a flash aplication and need to make a HTML version for people who dont have flash, I found this method on the internet [URL] but dont wish to use it as i dont want seperate pages and the delay caused by 2 loads and the time taken for the script to activate. I would rather detect the absence of flash anddisplay the HTML if and only if flash is absent If the flash was a JS i would just use the noscript taghow can this be done for flash?
View 4 RepliesIs there a SIP library to connect a flash application to a SIP server directly?(without passing from a rtmp media server)
View 2 RepliesMy loader component works when I publish to Flash Player 7 but not when I publish to Flash Player 8, why? The publish setting are for ActionScript 2.0 on both.
View 2 RepliesI am trying to create a flash player to display images in sequence using Flash player & ActionScript. The code below has lots of errors and I can't work them out. I have programmed in other languages and am perfectly aware that something like this.
*code*var imageLoader:Loader;imageLoader = new Loader(); // 1120: Access to undefined property imageLoader*/code*
OR*code*var imageLoader:Loader = new Loader(); // 1046: Type was not found or was not a compile-time: Loder*/code*
[Code]...
I have a swc plugin embedded in my product to stream live video to a group of recipients.The plugin uses the NetStream, NetGroup and NetConnection objects, the server I use to handle the RTMFP session is Influxis.One client creates a group as a publisher, and stream a live video.His Camera is enabled and I can see the video on the screen as well. The others connect to his group and play the video.Peer assisted Networking is enabled for both the publisher and the recipients.The plugin worked well in all 10.x versions (10.1/10.2/10.3)However, when upgrading to flash player 11.x, it stopped working.
-11.x to 11.x isn't working.
-10.x with 11.x isn't working.
-only 10.x to 10.x is working.
The server I use to handle the RTMFP protocol is Influxis.com I sent them the same question as well.The weirdest fact is that I'm using flash builder 4.6 with 4.6 sdk, which is aimed for flash player 11.1, and it is only working with 10.x flash players.
I'm having a performance problem that seem to be related to Flash Player 11.I noticed this mainly because Chrome auto-updates the flash player. So, it's now up to 11 in Chrome. During a sliding section transition, the flash player chokes and skips about 10-20 frames. In essence the content jumps, not a smooth transitions. You can see this at the following url. Using a browser with 10, plays as intended, a separate browser with 11, chokes and jumps ahead.
firstworldproblems-[url].....I have security sensitive site, that is more elaborate that I can't share here. But, the same issue is happening above.I'm using LoaderMax to load assets. Adding it to the stage and then animating them in from the left or right of the stage, using Tweenmax. The one I can't show is a series of images, 1280x640 pixels, 10 in total.Removing items from the stage when they are not visible, so I can get the CPU usage back. On Flash Player 10, this is working as intended.On 11 it jumps. I don't think it's the removing assets from the stage that's choking the player, because the above link has the same issue.I feel like this is a Flash Player 11 performance issue.
I keep trying to place some pngs in an XML file inside flash. The jpgs work fine but when it gets to the pngs nothing shows up. Do you need to have a special Action Script?
View 5 RepliesSIP support wihin Flash is going to be available? Flash 10? Is any SDK incl. this functionality planned soon?
View 1 RepliesDoes Flash support the <div> tag? I want to convert a table tag to a div tag to display within Flash.
View 2 Repliescould you answer whether ScreenVideo codec (ID=3) is supported by latest FlashPlayer for DefineVideoStream/VideoFrame tags?
View 1 Repliesflash lite4 whether to support fscommand2?
View 1 RepliesIs there is any printing support in Adobe Flash like the new one in Silverlight.net beta 4?
View 1 RepliesIE9 will support VP8 Encoded Videos if a User has VP8 Codec installed on Computer.Where will user get VP8 Codec ? Flash-Player ?
View 1 RepliesDoes Flex 4 support put request?
I know that Silverlight 4 support put request using its client http stack.
Here's the lowdown, I have a Flash MX navigation on an html page and I want to set up the buttons so that onRelease they will go to named sections on that html page; Thru the use of the <A NAME></A> <A HREF></A> tags.
View 1 RepliesThis my HTML but if the browser does not support flash then i want to replace image in flash part
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
[Code]....
I just have two version of my site
one is design for Flash supported (like Desktop) and the other one is for Mobile devices
I just want to know if I can detect and if is true (support) they will stay the same website assuming is[url]...
I just looked into the styleSheet and TextFormat class for the first time and built a text scroller that pulls its content from a text file with html in it. I am having great problems with the fact that I can't add top and bottom padding to p, h, and spans. I actually am a bit puzzled by the fact, it is not supported. Since that is something I feel like I can't really live without. I am wondering if someone might have written a class that allows you to use those css properties in the style sheet or knows of someone who has, or of some other work around to do this. I did try adding an invisible "spacer" MC from the library via the img tag, but have to say, that at this point, that was rather unsatisfactory, as the amount of control I get, is not quite what I want it to be.
View 1 RepliesI'm pretty new to Action script and I have a problem here that I can't seem to figure out.
I have this Action Script Code which is attached to a simple movieclip, and it all works IF the general settings are set for Flash Player 6.
It does not work for Flash Player 7 or above, which is probably because this is Actions Script 1 Code...
I attached the .fla file and also here's the code:
[Code]...
In some cases, such as what my client wants - Flash 6 and Flash 7 players behave slightly differently... a very annoying thing at times.Now, what I need to be able to do is to detect what version of Flash Player the user has. This will be done while my flash application is playing and then run the appropriate part of the function I am writing.Any way to detect what version of Flash Player is running from within the Flash Player?
View 3 Replies