I'm loading a bunch of images through XML like this:
[Code]...
Pretty simple. Loads each image into a imgHolder_mc named 0, 1, 2, etc. Each image is also set to alpha = 0 since I don't want them to show unless the slider is changed.
[Code]...
I am having a few difficulties trying to add a slider to adjust the brightness of a movie clip. So when i slide the slider to the left it changes to a dark skin tone and to the right a lighter skin tone.
View 2 RepliesIs there a way to adjust the rasterising of a vector based displayobject?
my problem is this: I create a textfield for example, and after moving it to z = -400 the whole text will look horrible (just like a low quality jpeg or so) as it comes closer to the viewport. I already know the vector shapes gets rasterized as soon the z value is set but there should be at least a way how it is done!?
I'd like to build image slider like Nivo slider with Adobe Flash Builder.
i'd like to have image controls, image titles displayed above the image(like layers in flash). i'd like to read the data from xml.
i'd like to have nice transitions between images.
mayebe u can provide tutorial or source code.
I'm new to as3 and I was trying to make my own slider for a while until I found the slider component. The slider component is so perfect for what I want to accomplish. But the size of the little graphics is ridiculous. If you click on the line that the slider knob is on top of the knob will snap to where you click. This is great but with only 3 pixels of height to click on it's pretty much useless. I tried going into the slider movie clip and altering the individual graphics but when I run the program the sizes are back to their teenie tiny size.
View 1 RepliesI'm relatively new to AS3. There's one thing that I don't quite understand about Sprites. I'm making a tile based game, and all the tile graphics for a level are inside one movie clip in each frame. Would I be able to go about creating multiple sprites based on the frames in said movieclip's timeline I would I have to go through and make a separate library graphic for each.
View 2 RepliesI am using Flash CS4. Is there any way to adjust the length of multiple timelines at once? I am doing an animation of leaves falling from a tree. The leaves alone have 17 separate timelines on separate layers plus each has it's own guide layer.If I had the ability to to select all of the timelines together and adjust all of their respective start and end times at the same same time, relative to each other as well as separately, life would be so much easier!Of course I can do it timeline by timeline, no problem, but I can't seem to adjust the length of more than one timeline at a time. (no pun intended)Even when I select more than one timeline, the double arrow only adjusts the length of one timeline. Even each guide layer's length has to be adjusted separately. I understand the benefit of this, but, testing timing and making adjustments would be so much simpler and go so much faster if I could select and drag multiple timeline lengths at the same time.
View 3 RepliesI have an image gallery app that has a slider to control the width of the thumbnails that ranges from 80 to 1024. As you move the slider the thumbnails width changes to effectively scaling the image between 80px and 1024px. Below the thumbnail is some information about the image such as the name, size, dimensions, etc. There is also a set of icons that do various tasks (delete, edit, copy, etc). All of this information is located within a VBox.The problem I am having is I would like to have the VBox hide when the width of the thumbnail reaches 150 px or below. This I have been able to accomplish with the following code:
<mx:VBox visible = "{thumbnail.width > 150}">The issue is that while the information within the VBox is now not visible, the real estate it takes up is not released. In other words, there is now a blank space the exact size of the VBox. What I'd like to do is to be able to release this space. I know this is probably something simple that I'm overlooking, but today my brain is just not working,
I'm doing a custom skin for flv and I can seek the flv if I moved the slider,but how to get the the percentage to move? to get the information of the seek's percent.[code]
View 0 RepliesI was wondering if it's possible that a popup browser window auto resizes to the size of a .swf or a image?
View 2 RepliesHow can you call objects based on properties they have instead of object names? For example if i want all the objects in an area to move somewhere else. Thats not what im trying to do but just an example. Also im using flash mx 2004
View 1 RepliesI have an image loaded into an Image control and I'd like to know the most efficient way that I can darken/lighten the image programatically.
View 2 RepliesWhat i want is: A slider that can be pulled by the user across an image to reveal a second one underneath. The same as this example, only I want a vertical scroll button not a horizontal. [URL]
View 7 RepliesQuick Question, I just started learning the psuedo 3D methods in FP10, and as a sample I am creating a virtual rolodex. It is dynamically generated with a user inputted number of cards. The cards are then added to the stage and are rotated around a central axis using the function below.
[Code]....
After this is created I have an Enter Frame listener that rotates the cards around that axis based on mouse position. Problem is that they get depth sorted based on the order that they are created, cardArray[0] in back all the way up to whatever the number of cards is. I have tried a few of the simple Z sorting classes and noticed that my cards dont actually change there Z property, only their rotationX. I was just wondering if anyone might know of an easy way to depth sort these. Otherwise the best idea I can come up with is to check the rotation based on 360 degrees and assign a depth. That seems like a lot of ugly math though if you want to see what the swf looks like check here.
Is it possible to limit access to an object's property values based on the type of object requesting it?
For example:
Code:
public function get someValue():Type
{
if(the object requesting this information is the right type)
{
[code]....
any idea about the image gallery in the [url]... website? When you try to resize the browser it will automatically adjust its column..
View 1 RepliesI am very new to Flash and have been trying to figure this one out for myself. Sadly i can't. What i want is:A slider can be pulled by the user across an image to reveal a second one underneath. The same as this example, only I want a vertical scroll button not a horizontal
View 2 RepliesI would like to create a image and content slider in Flex. There are many jquery plugings available [URL].. but i can't find an alternative for Flex.
View 1 Replies[Code]...
this is the code i got from a tutorial....here the images are loader and when the mouse is over each image the CAPTION is shown under the image in a text box. but what i need is...i want the CAPTION to appear when i click on the image(not on mouse over), but i cant find any mouseover event here as well.
i've got 5 images. i want the following things to happen:
1. the placeholder movie clip automatically tweens to adjust to the image's dimensions.
2. the transition between each image is a la: [URL] -- front page when you enter
3. the images stay on the screen for approx. 5 seconds each.
I'm trying to set up a form that presents a combobox when an ArrayCollection it's bound to has several items, and doesn't present one when it's empty or only has one item. I've tried doing this by creating this class, but unfortunately, the data provider I've bound to is never not empty at the time the setter executes.
public class ComboboxOrFail extends ComboBox
{
public function ComboboxOrFail()
{
[code]....
Is there a way to make a statement where if the slider is >=30 and <=40?
View 3 RepliesI have to create a slideshow that loads 16 different swf's into a container_mc. Each swf has an image with accompanying voiceover.
I have the basic next, previous, first, and last slide buttons working but they want to add a slider bar that plays and u can slide to a specific section of the slide show. The slidebar is where I am having troubles.
Here is what I have so far...
This is the code on the first frame for the buttons
Code:
nowPlaying = 1;
lastPlayed = 0;
playingNext = 2;
autoPlaySlides = false;
[Code]....
For the slider I need to create some kind of loop that checks where the dragger is. If it is between 1 and 6 slideLabel = "Go to slide 1"; If it is between 7 and 12 slideLabel = "Go to slide 2"; and so on up to 16... when the dragger is released on the slide the user wants to go to it needs to load specified .swf.
[URL]
can i handle multiple sound through one volume slider by passing parameters and MC instance name?
I have to create a slideshow that loads 16 different swf's into a container_mc.
Each swf has an image with accompanying voiceover.
I have the basic next, previous, first, and last slide buttons working but they want to add a slider bar that plays and u can slide to a specific section of the slide show... The slidebar is where I am having troubles.
It is partially working now, just needs to be tweeked... It is reading the variables, and setting the slide label text to the correct label, BUT it is only doing this once when the mouse is pressed and does NOT update when the mouse is dragged. I tried so many different ways and can't figure this out.
Here is what I have so far...
This is the code on the first frame for the buttons
Code:
nowPlaying = 1;
lastPlayed = 0;
playingNext = 2;
[Code].....
For the slider I need to create some kind of loop that checks where the dragger is.
If it is between 1 and 6 slideLabel = "Go to slide 1"; If it is between 7 and 12 slideLabel = "Go to slide 2"; and so on up to 16... when the dragger is released on the slide the user wants to go to it needs to load specified .swf.
where I can get script for xml image loading flash similar to the one at [URL] Notice this is different from "flash carousel" and also has a scroll bar at bottom.
View 3 RepliesFound this great image zoom with slider - any thoughts/tutorials how it might have been done or how it could be recreated? Couldn't find a source file to take a closer look, just the .swf.[URL]
View 1 RepliesHow can we make this kind of structure.
View 2 RepliesI have a Hero that can shoot bullets. I can get him to shoot multiple bullets, all with equal velocity. The bullets are supposed to be peas from a pea shooter, so I want to apply friction and gravity to them so they slow down and fall. I'd also like them to bounce of objects too.At the moment I'm just applying friction, so the peas should be shot forward, and then gradually come to a halt in the air. The problem I'm having is that if I apply friction to one pea, it generates the next one at the velocity that the 1st one is currently at - that is, the second pea starts out slow, and stops very quickly. The 3rd one is generated not moving.
How can I set the velocity to reset for each pea, so they all start out equal? They all move with the same properties, so I want to deal with them all in one arrray/loop. Is this possible?I have posted the basic structure without any velocity or anything specified because I'm not sure where everything should go. If I specify a starting velocity in the document class and then use the for loop to apply friction, it changes the velocity of every pea. The Pea class just contains functions to draw the pea.
Code:
public function bullets(event:Event):void {
if (s==20 && PandaHero.currentFrame==13) {
[code].....
I'm completely new to this forum, and would like to ask your help for one issue. I am working on an interactive flash map, I was able to set all the countries borders with the help of fireworks (awesome tool), and import them back to flash and set each country as a button. I would like to set all of the buttons to have the same properties for example : All the buttons have default red color, and will have a mouse hover frame that will change the color of the button to blue. I DO NOT want to set each button manually, because I would like to have the choice to change the mouse hover color to a different one, and would like to avoid passing each button and changing each one's mouse hover frame.
Is there a way I can built a template of a frame, and for each button set its mouse hover frame as the template frame I built ? And then if I make any changes to the template frame, all of my buttons would be automatically updated ?