I've searched every possible actionscript forum for this and i cant seem to find it. How can i create an "area" of blur which blurs everything beneath it?Like some kind of masked blur effekt?
View 0 RepliesI have created a video for my flash application, convert it into a flv file.Now, I have imported it into flash in a layer, then I have created a new layer where I would yo place a mask with gaussia blur. You ca see example in the pic.I draw a mask into flash, converted it into a movieclip and assign to it a gaussian blur from the filter panel. But when I send the fla in execution (Ctrl+Enter), the video appear through the mask, but this one have not gaussian blur filter applied.
View 2 RepliesI was wondering how this effect is done. If you look at the jpeg you can see that the content under the menu and conent frame is blurred. Been searching for a while for this but still I cannot trick it myself.
View 2 Repliesthere are loads of tutorials for maginfying glasses that use draggable movie clips and masks.
do you think it would be possible to have a blur filter effect on a mask. basically i will have a jpg as a background, a mask that follows the cursor, and where ever the cursor goes the jpg will be fuzzy under the mask.
I have a circle mask over a photo. I'm trying to get it so the edges fade out to black. Currently, it just is a solid white circle. It's a movie clip and has a radial blur and is motion tweened. The alpha channel on the radial blur is 100% on the first point and 0% on the last. Can a spotlight with radial blur/fade be done without adding code or actionscript?
I've attached a photo of what I have now along with what the movieclip I'm using.
I'm on CS5, but can only use AS2, if actionscript is necessary.
I know how to mask in Flash and also how to make a video for Blur on AS3. Filter Blur
[Code]...
Can I put a blur on a dynamic mask to get faded edges like this:
Code:
var square:Sprite = new Sprite();
square.graphics.beginFill(0xFF0000);
square.graphics.drawRect(target.x, target.y, target.width+5,
[Code].....
I have a scrollbar that I want faded edges on the content mask. The content is all dynamic loaded from xml.
I am looking for some help on a specific effect. I was pretty good in the old days in flash but I have fallen behind badly and the new action script and such is making my head spin a bit. The effect I am looking to do is like the FETblur,first one on the page, [URL]...
View 1 RepliesI have a startDrag function set up on a loader and mask that when the mouse is down on the loader it drags, when not it doesn't. There is also 2 buttons that control whether mask1 or mask2 is used. What i would like however is when the mouse is down - the area of the loader outside of the mask is visible but only by about 10/20% alpha, that way the user can see where all the image is while dragging. Is this possible? Full code can be seen below and i have attached the zip with the .fla file:
[Code]...
what i am doing is to make something along the lines of the "scriptable mask" tutorial Inigo was kind enough to put up.My idea is to have a large mask behind the whole of my flash site, this masks a colour image with a black & white one (nothing tricky). The image I am using is actually 5 separate images combined, and each is a pic of certain parts of the site.I also have a very basic set of buttons along the bottom... each corresponding to each section.
All I want is to set it up so that when I mouse over the buttons, the _x of the mask moves to correspond with the correct image... really very basic... or so I thought .If anything it should be easier to do than what is in Inigo's tut (where he uses the _x of the mouse to move the mask)... i just cant seem to get it to work with a nice easing effect (its easy to get the mask to simply snap to each coordinate, but I need it to smoothly move).
maybe point me towards a better way to mask. png file is way too big. I have been using the mask layer option to create my own mask around a jpg image by drawing around it on the mask layer. There has to be a fetter and faster way to do this. Is it possible to maybe have a specific color range have an alpha value of 0. Similar to green screening whereas If I put the item I want to clip on a green background flash will auto take out the green for me. and by auto I mean action script maybe. I think this can be done but im not finding it.
how are these guys clipping these images [URL] they have the movie clips set up where the black background on the 3 layers of shoes is getting masked out. When I go into the shoe movie clips I see there is a black background but it just disappears when I go back to main timeline.
ive gotten one movie clip to mask another in the actions frame but i cant seem to be able to mask the flames which are a shape with a movieclip in this as file. im not getting any errors but the mask isnt covering anything look near the bottom at s.mask=mask_mc; there are about 20 "s" shapes spawning per second if that has anything to do with it
Code:
//this package turns an mc into a flaming button that calls a javascript function
package
{
import flash.display.MovieClip;
[Code].....
I was wondering if its possible to mask multiple MC or Sprites under one mask, when using AS3.abc.mask = a;cba.mask = a;something like that
View 2 RepliesI'm trying to do this as a bit of a transition. It's always the same movieclip.I just want to give it a duration, actually the same duration as something else I have going on, so I can reuse the variable "fadeDuration"Then I just want to set the maximum blur amount.I have no idea how to go about this. I found two things online, but one looked to be using a plugin, and the other was missing all class definitions and probably asuming you knew which parts were declared at other spots.
View 1 RepliesI have a short TEXT that I turned into a symbol, it is a MovieClip on the stage. I applied a preset motion of blur fly in to it and it does fly in but does not blur. I tried to use the motion editor to increase a blur to 255 but even when I add it on the initial keyframe, there is NO blur.
View 10 RepliesHow to make an object or pic in a webpage slowly blur when mouse overed ?
View 21 RepliesHow to show blur effect in SVG. i have to draw a line with blur effect and then convert it to SVG. i know to convert in a line SVG but i sont know how to show blur effect
View 1 RepliesIs it possible to blur the edges of a movieClip, and only the edges? If I use the blur filter, It blurs the entire image, not just the edges.
Basically, I have a flv file within a movieClip, and I need the edges of the video to look feathered.
I'm not that great with Actionscript 3.0, so naturally I have an hurdle to leap.
I using the 3D Carousel from flashcomponents.net and I need to figure out how to get the images blur when they are not the front focal on the Carousel. I tried an onRelease (which works to un-blur it), but I didn't know what else to pair it with so when I click on another object it blurs and goes to the back. I don't want it to blur when I roll off, only when another object is clicked.
I have text that I would like to come in to the stage from the side, but I would like it to be a horizontal blur like it is fast, then unblur to a sharp text. Is this something that I can do in all within Flash?
View 1 RepliesI have just made a flash animation with various amazing effect. Now i have a question: How to Make Blur Effect in Flash
View 1 RepliesHow to blur 3d object? (Papervision 3d) And save created new object as new 3d model? (can help in sky/clouds generation)Like in 2d picture I've turn rectangel intu some blury structure
View 3 RepliesHow do make links blur once you rollover the one you want? Example: [URL] (You see how once you rollover a cellphone the others just blur and shrink?)
View 2 Repliesi've created a movieclip that i'm applying a simple blur filter to and in Flash when i play the timeline it runs with no problems although when i publish the movie the blur doesn't display - i've run out of ideas about why this could be! I've looked online and can't find any suggestions either - does anyone know what i'm doing wrong?
View 1 RepliesI was wondering if it is possible to blur something that is drawn dynamically? I have a dynamic line that zig zags, but when I attempt to put a blur action on to it, it does not appear blurred. Does anyone have an idea how to get this line to look blurred? (I'm trying to achieve a spray paint effect).
[Code]...
I've got a strange problem with the blur tool. I have a movie clip that i have added a motion tween to and applied a blur to it - so the movie clip image blurs as it moves. This was working perfectly when i first tested it and as i've continued with the creating the flash file and re-tested for some reason the blur is no longer displaying. It's strange as it shows as blurred in the Flash file i'm editing but when i press F12 to display in a SWF it's not blurring. I've attached the file i'm working on
View 2 RepliesI am having problem with the text tool on flash version 8 the problem is that I am seen some blur letters when I preview my swf on explorer using dreamweaver version 8. I trying to find out what could cause the blurring the properties of the text is arial size 10 and verdana size 10. For example the period on the small i in some words look different.
View 3 RepliesI created a movie with the blur filter applied via Actionscript which works great. If I try and load that movie into another movie via loadMovie, the filter is lost. Can a parent movie load a child movie and apply a filter to it? My test case is pretty simply, the child movie contains a text movie clip with no actions or filters. My parent movie loads the child movie and applies the blur filter to the child movie (and fails). If I use the Actionscript to apply the blur filter from the parent movie in the child movie by itself it works fine.
This is the simplified version of the code I use to apply the filter which works when I use it directly on the child movie:
[Code]...
I've put a blur effect on the hit state of a button, but the script for the button is On Release Go to and Play the scene I wan't it to skip to. So as soon as the button is clicked it does what it's told and the blur effect (16 frames long) doesn't get to play.
View 5 RepliesI'm currently producing my first website in Flash CS3 and have just encountered a problem with a transitional effect I'm experimenting with: Transitional effect uses the Flash Blur filter set to 10 (X andY) on the first frame to 0 on the last frame (Medium quality). This is used with an alpha setting of 50% on the first frame to 100% on the last frame.
The .fla is using the default setting of 12fps. When I preview the transitional effect, various multi-coloured horizontal lines appear randomly on the images during the tween, and some remain visible once the tween is complete. Would this be because the blur filter cannot be used effectively together with different alpha settings?
Maybe the frame rate for the animation is set too low?