I am working on a Flash Banner for a website I am working on. I'm using the Greensock Tweenlite package.Basically a bunch of products slide into the screen or fade in every 5 seconds, however once all the products are shown, the SWF ends and goes blank, I want it to restart and go on continuously.
View 7 RepliesI want to make a banner loader. Basically its a swf that must load other swfs continuously, looping. Ive tried 2 things this far, and none of them seemed to work. 1st try: on my banner1.swf I used the onComplete parameter of Caurina package. So, when the animation should end, I simply made a method stating something like this:
[Code]...
I'm trying to loop a Flash Banner ad. I added the code to the first and last frames on a separate action layer on the main timeline, but it's not working.
I'm using actionscript 2.0/CS4.
I have a stop action on the last frame of the last text movieclip that plays. And it seems to get hung up here. When I remove the stop action it just loops that movieclip and not the whole animation.
This is the code I'm using in the first frame of the main timeline.
> var counter:Number = 0
And this is the code I'm using in the last frame of the main timeline:
> // if its being used on the last frame use a stop(); action on the top line
> if (counter < 3) {
>counter++
> gotoAndPlay(1)
> }
I just want my loop to keep playing regardless of the timeline stopping and starting.
View 3 RepliesI am trying to make the bar in the Simple Flash XML Photogallery [URL] continuously loop and having a hard time. I don't really care if the mouse would control the thumbnails, just trying to have the thunbnails move left continuously. I have put two tutorials together and made the mouse control the thumbnails. I used the "Simple Flash XML Photogallery" and the "Scrolling Thumbnail Panel" from [URL] and came up with the file below. How to make this continuously loop or scroll. [URL]
View 1 RepliesI was trying to make a banner where a line goes across from right to left continuously and as it progesses its alpha value goes down.
View 4 RepliesI have a movie clip, which is loading a portfolio. A movieclip holding the images drops down into the screen and then when the user clicks the return button within this movie clip, it dispatches an "end" event. In the main timeline, I have put in a gotoAndPlay(frameno); in response to the "end" event.
From this "frameno" the movie plays on and is supposed to come to a stop at the end of the timeline. The problem is that it is ignoring the last stop and jumping back to the first frame of the movie. Also, the stop I placed to let the user browse the images, and listen for the end event, is being ignored and the timeline is proceeding as normal and looping continously.[code]...
I've been asked by a client to build a vertical scrolling banner that pulls logos from a database and displays them in a line, scrolling through an infinite loop.I initially built it using a jquery script I found, but have discovered in the end that it won't actually do what I need it to.I know there are a million different scripts out there roughly covering what I'm after, but my PHP/Flash integration knowledge is pretty well non-existent.Here's what I've got using the jquery script. I need the flash one to display 6 banners at a time scrolling up, as opposed to the one.
View 1 RepliesI have to make a banner ad for my company's website that is 4 frames. It needs to play each frame about 3-4 seconds and then loop after 4th frame and continuously do so. It needs to begin this process when the web page is brought up without the user doing anything to it (so no clicking)And I have to keep it under 40k.I've found alot of tutorials for using external swf files and images but everything seems to use a button and I can't seem to get the coding down at all.
View 3 RepliesI have this code, and it needs to stop looping before 15 seconds to be used in google. It's a rotating carousel that currently has three items spinning around.
[Code]....
Actually, I'm HTML-coder, so I've recently confronted by difficulties with Flash. Its making the text banner. Flash needs to get variables from the following 'vars.htm' file:
myVar01=the_first_textDDDsecond_textDDDand_surely_ the_third_text&myVar02=DDD&myVar03=3
Where 'myVar01' contains the text, 'myVar02' is the text delimiter's look and 'myVar03' is the showing delay of texts. In truth, I've never seen the ActionScript before.
So, what I've done regarding that all:
ActionScript Code:
var data_lv:LoadVars = new LoadVars ();
data_lv.load("vars.htm");
data_lv.onLoad = function() {
[Code] .....
The problem is, the 'trace' shows me correct array looping but in Flash I see there's only one passage through the 'texts' array. But I need the infinite looping in Flash movie, instead of one.
I have a countdown timer and a click counter and I don't want for either of those to reset if the page were closed / refreshed. What I want is that once the timer and click counter start, nothing will interupt them. But the problem is that if i simply go to another page and back it resets everything. Here is my code...
[Code]....
I played around quite a bit and came up with exactly the effect I was looking for. Basically a movie clip with floating icons that come in and out of the stage. All was done in actionScript 3.0 and Code Snippets. There is no timeline per se, using the classic timeline view it is only one keyframe, the animation lasts for about 45 seconds.
I want the animation to loop continueously. Even in the HTML output I did click Loop Cont. under Publish settings. That does not work either.
I am building a banner ad and I am using Flash CS4. I need it so when someone clicks the banner it takes them to the page in a new window. Its just a a simple URL and I keep getting syntax errors now and I dont know how to do this properly. I have tried these methods.
[Code]...
In my original thread my answer was given and I only needed to take the information and tweak it to make it apply throughout other instances in the code.This is marked as answered. The way I constructed the code heBecause each Movie Clip is individually handled, I was explained by Ned Murphy on this forum that I need to insert code for each individual clip to send it back to start when it comes off the stage because it is structured to go to infinity with the movie symbols continuing on their path.I get that. ittle code to add was provided for an example clip that started at the top of the stage and went down, then when it goes off the stage, go back. In this case it was for MovieClip_1 (Out of 15) The red was the additional code (Provided by Ned Murphy who is IMHO a Guru here) that was added :
/* Animate Vertically*/
movieClip_15.addEventListener(Event.ENTER_FRAME, fl_AnimateVertically_13);
movieClip_15.startY = movieClip_15.y;
[code].....
is it possible for flash to detect off-stage mouse coordinates in order to continuously drag an object within its bounds while the mouse is moving outside of the stage? for example: i have a draggable red square on my stage. the stage is the bounds of the drag. if i drag the red square to the bottom of the stage and continue to drag outside of and around the stage, i'd like the red square to continue moving within it's bounds, following the mouse coordinates. currently, dragging halts as soon as i leave the stage and the red square only begins to move with the mouse coordinates if i reenter the stage bounds.
View 2 RepliesThe issue I am running across is this: I encoded and embedded a movie clip to act as the background. There are other animations that can and will loop, as the movie resets itself. But there are some elements that I only want to run once and not repeat once the embedded movie loops (link introductions, where objects fly in and transition into the button). How can I set the one time animations to fire just once, while keeping the embedded animation on a loop?
View 1 RepliesI am fairly new to Flash and I am constructing a website. The issue I am running across is this: I encoded and embedded a movie clip to act as the background. There are other animations that can and will loop, as the movie resets itself. But there are some elements that I only want to run once and not repeat once the embedded movie loops (link introductions, where objects fly in and transition into the button). How can I set the one time animations to fire just once, while keeping the embedded animation on a loop?
View 1 RepliesI am trying to create a flash banner ad that loads when a page loads and gives the user the option to minimize it. When the ad is minimized, I wanted to leave a box (that could also function as a mini version of the larger ad)that could be clicked and reload the ad if desired.
I have been struggling with how to do this. I tried creating two movies, one for the main ad and one for the smaller box that remains after the ad is minimized. I inserted the object code for the larger ad into my html and it loads and will load the smaller ad then the button (for minimizing the ad) is clicked but the smaller ad loads in the area defined by the object code for the larger ad. I am not sure how to work around this.
how to continuously loop a sound, but all I have seen is aSound.play(0,1000);Not really a continueous loop. I was looking at watching for one of the COMPLETE dispatches (from the Sound object, or from the SoundChannel object), then start the sound again. The only thing is would this not start another channel?
View 3 RepliesRight I have created a flash banner ad and taken it into dreamweaver, I thought I could just link it to its website easily in DW but I can't.
Do I have to set the url in the flash doc, if so what do I do
i spend ages getting to know how to use flash, and make a banner and the bits that are animated have black boxes over them when i publish.
[URL]
We are moving to a new platform and will have a flash banner on the home page that will be changing frequently with new promos, etc. You can find the flash banner at http:[url].....I need to be able to update the swf file and have it immediately reflect on this new home page, but it only seems to be updating on the non-secure URL in Firefox and not at all in IE.
View 3 RepliesI have flash as part of the adobe suite but am yet to have a real go at it. If I was to buy a third party flash banner say with a size of 100x250 and wanted to add text to it so it would then be 100x350, is this an easy process?
View 1 RepliesI have a banner I made which has an xml file that needs to be uploaded with the rest of the files. here is the code
[Code]...
i want to use xml and flash to make a banner like the one that tv.com is using so when i want to change the image or the content of the banner, i can do that by changing the url of the image and some text in the xml file. what do i have to do with flash, actionscript, and xml? is there any open source that i can use?
View 1 Repliesid like to know the action script code i need to add a url to my flash banner,ive found this and it works,but i need it to open as a self window and not as a blank
digilink_btn.addEventListener(MouseEvent.CLICK, myButtonFunction1);function myButtonFunction1(event: MouseEvent) { var request:URLRequest = new URLRequest("http://www.digilink.gr/fullmoon/index.php?option=com_mtree&task=advsea rch"); navigateToURL(request);}
where abouts can i add the _self so it opens within the web page?
I am creating a banner for a website, and I need to load an external swf of scrolling images that sits behind the layers in my flash banner. A similar example would be the website: [URL]..I have created managed to create everything in this banner except the scrolling images, so I have an external swf file that needs to load into my flash banner project.
[Code]...
i have a banner generate by my php code as below:[code] why i can not click to this flash to follow the adv link.
View 1 RepliesAll I want for this banner to do is loop and start back from the beginning after it finishes. What should be the proper code? What is wrong with this?
View 1 Replies