I am trying to dynamically load images through the UI Loader component. Attached are the errors I get, and although I think that the coding is close to correct, when I publish, it just flashes up then restarts the movie...
Attachments: Picture 1.png (84.0 K)
I am loading dynamically a big image into a uiLoader component. And using the following lines:
stage.addEventListener(Event.ENTER_FRAME,followFrame); function followFrame(event:Event):void {
var dx:int = myUILoader.x + mouseX; myUILoader.x -= dx / 10; var dx1:int = myUILoader.y + mouseY; myUILoader.y -= dx1 / 10;
I manage to make the image following the mouse just fine. But the image always off center, as the registration ponit of the uiLoader would be on the left size, even if I try to align it to the center of the stage by:
myUILoader.x = (myUILoader.stage.stageWidth / 2) - (myUILoader.width / 2); myUILoader.y = (myUILoader.stage.stageHeight / 2) - (myUILoader.height / 2);
I need to load dynamically a few images (4-6) so that by clicking on particular image user would invoke particular action. Embedding images solves the problem but at the expense of file size. If I load them dynamically, they lose their ID.
<comps:ExercisesScroller id="scroller" x="300" y="100"
ex1="@Embed(source='assets/Exerc_1.png')"
ex2="@Embed(source='assets/Exerc_2.png')"/>
and so forth this works. But instantiated in CDATA it does not work:
import components.ExercisesSCroller;
private var custScroller:ExercisesScroller;
private function init():void {
[Code].....
of a complex question to me, but it's coming from an absolute beginner and it might be considered a stupid one, that's why I posted here...I've kind of been dropped in the deep end with this task and I can't get it right... I have a company's organisational chart in flash where it loads in each person's name dynamically for their department and when you click on it it brings up their CV information such as name, qualifications etc. This is loaded into a dynamic text box. I can test it locally with an xml file and then switch back to the online version.The local version I check by switching to "strXMLpath = "organisation.xml";" where things are laid out as follows:
Code:
<organisation>
<bod>
[code].....
I am trying to load dynamic images in order without all of them attempting to load at once....I have an array of images that I loop through depending on the gallery that will load up....but when i loop through the images all of them try to load.What i need to happen is somewhere in the
View 4 Repliesi have done a bit of actionscripting involving loading .jpgs from an xml list based on a drop down menu, but i was trying to figure out if there was any way to load either gifs with transparent backgrounds, or similar, different shaped image files from an external source.basically, im trying to load an image of a doorknob and an image of a door and have a user drag the doorknob onto the door and see what it looks like
View 1 Repliesdevelop a header splash like you see on many sites now.I have a few ideas. One is a list of images or clips with images embedded.On load teh first image loads up, then after a set time (30 secs),the second image fades in, the first fades out,and etc.looping.
View 8 RepliesI am trying to call in images dynamically from my Library in a more efficient manner.
With an bitmap image in the Library set up for actionscript with the class name of 'itemFromLib', i tried:
Code:
function placeImage():void {
var _img:itemFromLib = new itemFromLib();
var _bitName:Bitmap = new Bitmap(_img);
[Code].....
Both with the results of an error that "1067: Implicit coercion of a value of type Class to an unrelated type flash.display:BitmapData."
I've tried to write my own button based on MovieClip. So I created a new MovieClip called MyButton. It has 3 main frames (or clue frames or... I don't know how it's called in English): the first is for button's upState, the last two are the start and the end of press animation (I need a long animation - not just one frame). All the frames are empty. Then I created a class MyButton.as:
[Code]...
I have the following code which traverses an XMLList of nodes:
[Code]...
If the current node's text is true, then I need to load an Image with the same name as the node (plus the extension) and position it.
I have 3 movieClips on the stage. I want this to load images from urls that I have withdrawn from a php script that randomly selects from stored urls in the database. I want to load one of these into each movieclip. Here is the code that i have, but it doesn't work. (btw, this is on a frame of the movie)
PHP Code:
loadText = new LoadVars();
loadText.load("generateQuiz.php?week="+_root.week);
loadText.onLoad = function() {
[Code].....
I wanted to create a slideshow in Flash MX 2004 using the instructions given in the Photo Gallery Using XML and Flash tutorial on this site but I wondered if someone could tell me if I would be making the right decision using this technique considering the following: My slideshow will be used for a menswear clothing company, so the images will need to be on the left and then on the right would be all the information relating to that image/item of clothing - no problem so far but...
I've already set up a slideshow the "long way" with 20 or so images as well as their related information on different frames - the images are on one layer and the descriptions are on a separate layer also. I've got a couple of buttons controlling the navigation back and forth between the frames and I've also got a preloader on frame one to load everything beforehand. The problem is that I'm worried about people on slow connections, that they'll have to wait an unreasonable amount of time before all the images are downloaded, so I thought that using the dynamic method outlined on this website would be useful and save downloading time, but I wondered if it was possible to keep all the information relating to the images on separate frames and just have the images import dynamically? The reason for this is that the information to the right of the images is quite long with information given about style numbers, sizes, descriptions and even colour square graphics are inserted to display available colours etc, so I'm thinking that it's probably not practical to dynamically load this information but to keep them on their separate frames as I have them at present, and also all this information is on top of a simple graphic interface on which I'd like to keep the info vertically centred. So is there a way to have the images load dynamically, and if so how would I get them to load correctly onto the right frames that match their relevant information? Can someone tell me if it's possible to use the information in the abovementioned tutorial to do what I want? Or can you tell me if I'm choosing the right method - I mean considering all the information including colour squares that will appear to the right of the images, do you think it's impractical to choose the Photo Gallery Using XML and Flash method? Also I'm not even sure if loading the images dynamically will improve things - I mean the images still have to be downloaded right - will loading them dynamically just mean that they'll load one at a time as the user navigates through the slideshow and if so won't this cause delays for the user in that they'll have to wait for each image to download before they can proceed forward to the next item?
I am using the tutorial about dynamically loading images, that then fade when a button is pressed and change to the next image, however I want to load the images and have them fade in and out without pressing anything i.e. an mc that rotates the images, fading them in and out.
The script I have been using is this:
[Code].....
I have Button components that are populated dynamically. The buttons need to each have an icon (using the button.icon property).The icon however, is retrieved via webservices so all I recieve is a URL to the jpg that needs to be loaded as the icon. When using the icon property, you load an instance of something in your library over the top of your button. So I was wondering if there was a way to retrieve this url, and load it into the library which would then allow me to use it as an icon??
View 4 Repliesi'm trying to load a series of external jpg images. What to be loaded is stored in an external xml file, which indicates the folder along with the file name pattern and the number of images. This is handy since images are numbered incrementally (image_1.jpg, image_2.jpg...) Finally, i need to position these images as a strip, that is, one next to each other horizontally.
I get the info out of the xml file without issue, the url are correct (if i paste them in the browser, i see the image file) yet, it seems there is an issue with my loading mc code.
[AS]
function doStrip(obj:XML)
{
var project = obj.firstChild;
var sequences = project.childNodes;
[Code]....
i m loading images dynamically from a folder and i want when they show on the stage they retain their quality for that purpose i use 2 things first is
stage.quality = StageQuality.BEST;
and the second is with bitmap class after loading the images in loader i write..
PHP Code:
Imageload.load(new URLRequest ("images\"+xml.images[k]));var image:Bitmap = Imageload.content as Bitmap;image.smoothing = true;
[Code]....
I have a website which needs to load 3 external images into 3 movieclips when the page loads. The page gets the URLs for the 3 images from an XML document, ie.
<imgurl>graphics/panda.jpg</imgurl>
<imgurl>graphics/panda2.jpg</imgurl>
<imgurl>graphics/panda3.jpg</imgurl>
[code].....
I need to dynamically load images from an XML file and I usually find badly written tutorials that I can't understand or I find a .fla but don't understand the code in it.
View 3 Replieshow to add an image to a specific frame?
I am dynamically loading images onto the stage but I want each image to be loaded onto separate frames.
Can you addChild to a specific movieclip instance i.e. movieclip.name.addChild(movieclip). I have built a 'for loop' to render a series of 'products'. The idea being to create a movieclip, load an image into this movieclip, assign a URL and later some text.
[Code]...
I want to develop a header splash like you see on many sites now. I have a few ideas. One is a list of images or clips with images embedded. On load teh first image loads up, then after a set time (30 secs), the second image fades in, the first fades out, and etc looping.Any ideas on specific tuts or threads with code examples?
View 1 RepliesIs this possible? It's a hassle to have the extra step of keep a seperate movieclip behind the one with the image to get a border. Can I load an image into a movieclip that has a border, or give it a border afterword? Same with shadows.
View 4 Repliesi'm loading dynamically some images in a movie clip (banner in [URL].. everything works fine in safari, netscape, firefox (of course).. Explorer KO! actually IE (6.0.2900) works, IE (6.0.2600) doesn't!! image is loaded (preloader is working correctly), but image is not visible!!
View 3 RepliesI m trying to dynamically loading different images and want them to apear in a scrollPane or Simply scrolled area. I tried different ways but did not find good one for me.
[Code]...
I'm using TLF text, so there's a RSL involved. I get that there's a way to include the library in my own code, but I'd rather not do that unless there's no other solution.
In Advanced Action Script Settings > Preloader Method, there's a choice between "Preloader SWF" (five black dots, the default thing) and "Custom preloader loop". My first question is then how to use this Custom preloader loop thing? What is it referencing? Do I have to write a special thingy somewhere? What?
And I already made a simple "bar filling up" kind of preloader, which I'm testing by using the aforementioned "Custom preloader loop" setting and simulating download. (My project no longer compiles when not simulating download [VerifyError: Error #1014: Couldn't find flashx.textLayout.container::ContainerController class.] which led to the conclusion that I'm doing something wrong here.) It does fill up, but it starts at about 60%. From my earlier badly worded Google searches, I think my problem is that I am using a bunch of external .as files which are loading before the preloader. Is there any way to tie the .as files later, or something?(That, or my preloader actually takes up 60% of the project's data, which would surprise me but isn't impossible because it's still very bare.
I'm making a game and I'm sorta kinda using tiles to render the map screen. So I have a bunch of sprites on screen, for which I created a Refresh() method that I call whenever necessary. In this method, I use a Loader object to load desired bitmaps (which aren't in the project's Library), then add this Loader as a child. The main reason I did it that way is because I could then reference the images to load with a string, and so include arguments in there.
(I don't know if I'm clear, so let my try to be more descriptive. I basically have an array containing the map data. I'll read that array and pass some properties as arguments to my Refresh() method to draw the screen correctly. I'll then be able to load the image ["sprite" + arg1 + arg2 + ".png"] by using that string to create a new URLRequest (and then use that in the Loader).If I understand the way this works correctly (and I probably don't ), I'm downloading the images all over again each time I call Refresh instead of having them "cached" somewhere, which is inefficient (because they're tiles and I'm reusing them multiple times). Am I correct in that assumption?
I thought the more "efficient" way would be to import my tiles in the project Library and export these for ActionScript. (They're PNGs, so they inherit from BitmapData.) My problem with this method is that to use these images, I now have to instantiate a class, so there's no string involved, and so I can't concatenate variables with a string anymore to fetch the right PNG to display, which is really, really annoying.
So I'd like to have the best of both worlds: cache images while still being able to refer to them with a string. Is that possible? And more generally, what's the "right" way to dynamically render images in the context of a tile-based map?
EDIT:public vars vs. getters and setters I have classes with properties. I've gathered that it's good programming practice to declare these properties as private vars and then define getter and setter functions to access them. It's easier to just declare these variables as public and move on. What are the pros and cons of both methods?
i am dynamically loading images with the code :
[Code]...
Basically it appears as it should when i enter the frame, but when i go to another frame, it is still there, on top of everything else, is there some way that once it is not on that frame, it isnt there anymore?
I need display the preloader allways when the user is loading the content to UILoader component.1º My preloader instance name is: precargador_mc,2º bar instance name is: barra,3º dinamic text filed instance name is: ilosc4º UILoader component instance name is: centrum.When I try the movie Flash answers with error 1119 and indicate this line:
centrum.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, loadFile);
centrum.contentLoaderInfo.addEventListener(Event.COMPLETE, LoadOK);
I am trying to do something that seems like it should be relatively easy. Well bang goes that theory. Here is what I am trying to do. I have the path to a group of images stored in an xml file. I want to load them to a movie clip on the stage. doing this directly by reading the xml file and using loadMovie("filename"); bsaically does what I want it to do with just a few problems, 1. the movie repeats so the same image is pulled from the server multiple times sucking up bandwidth. 2. On slow connections the images can sometimes load slow making the movie not display properly. What I would like to do is load all the images into some structure and add the images to the movieclip in the time line when needed. How does one accomplish this in action script 2.0?
In a perfect world, I would just load all the images to an array and load the array element to the movieclip on the stage.
I'm dynamically loading images from a JSON feed into individual movie clips and then adding the clips to the stage(both by addChild)--basically creating thumb tiles. I've added a click handler to do something when the MC is clicked. WHAT'S MY PROBLEM: The problem I have is that the MC is clickable, but the content is not. For instance, the clip has a white box in it, and the loaded image is made slightly smaller and centered to give a white border around the pic. An empty clip loaded to the stage works fine, and the white border around the image is clickable, but the image is not.
View 1 Repliesrecently i have tried loading external icons dynamically into my vertical carousel using XML and the icons got loaded successfully into the carousel ... but once they are loaded the entire processor is getting consumed ( even though its a decent config ) and the animation is becoming sluggish ... i've tried and searched the net for a solution but i couldnt find one related to this... i just used actionscripting in my .fla and no tween ( in the main timeline or the movieclip in the library) ...
var numberOfItems:uint;
var xmlPath:String = "intro.xml";
var xml:XML;
[code]....