I am using net stream video player with xml. How can i get videos dimension (Width and Height).if suppose i get the dimension of the video and i will change the video size with aspect ratio.
View 1 RepliesI am new in AS3. I am using net stream video player with xml. How can i get videos dimension (Width and Height).
if suppose i get the dimension of the video and i will change the video size with aspect ratio.
I would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 3 RepliesI am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
The plan is to have that video stretch across the whole page (the flash does, the video itself does not).Firstly: well aware of the issues - bad performance, horribly stretched/pixelated video. I know this. However a client wants it so we have to do it, simple as that.Does anyone have any ideas on how this can be achieved? I've been in touch with the creators of the flash video player I'm currently using and they've confirmed it isn't possible with that flash video player.
View 1 RepliesIs their a way to determine the height and width of your flv f4v file after you dynamically load it?
Couldn't find any properties in the loader or netstreaminfo that I could grab the info from.
When I publish my FLV video using Flash CS3 and the "SkinUnderAll" option...the player controls are not visible unless I change the height & width in the html file Flash created.But, Flash shows the height & width 3-times in the html.
Question-1: Why 3-times? What does each of the 3 Height & Width references do?
Question-2: How should I modify the code to be able to see the entire video and the player controls?
It seems if I change all 3 everything just gets bigger and bigger.
1 - I import it into Flash CS3 on a PC w/XP Pro using... File | Import | Video take all the defaults and choose "Skin Under All" as the player option.
2 - In "Properties" panel at bottom of screen Flash shows the video as 640x480
3 - I then click File | Publish to publish the video. Flash creates all my files for me.
MyVideo.fla
MyVideo.flv
MyVideo.html
MyVideo.swf
SkinUnderAll.swf
AC_RunActiveContent.js
4 - I then put the folder with the files on my website.
5 - The video plays but the player controls are not visible.
6 - I see the Height & Width referenced 3 times in the html file Flash created for me (and none are 640x480, they are 550x400 !)
7 - I try changing the 550x400 to 640x480 in all three places... no good. Even at 1000x1000 the entire player is not visible. Everything just gets larger.
What are each of the 3 references to Height and Width in the html file Flash Creates and which should I change to simply show all the player controls?
i want to load external images of different height and width into same height and width.
View 3 Repliesi want to load external images of different height and width into same height and width.
View 0 RepliesI am new in AS3.I am using net stream video player with xml. How can i get videos dimension (Width and Height).if suppose i get the dimension of the video and i will change the video size with aspect ratio.
View 7 RepliesI have a Flash CS4 Professional version installed in my machine. Here is my problem.
1st - I'm importing an image to stage and set the width and height to match the image. (everything is good, no problem) 2nd - I am using the FLVPlayback components build-in from Flash CS4. It does load the video and everything. (everything seems good) 3rd - Publish the video to my local drive (everything seems good) 4th - I could play the video from my local pc and it loads fine and fast 5th - Upload everthing from my local folder to the Web server, it does display the background image but not the video. It has a white blank screen. What is going on? I copy the exact folder from local to server. What have I missed? How could I make the video to load?
Already I have one video player and it's width and height are set as 450 and 370 respectively. It's set by statically on its property field. Now I want to change the width and height of video component according to the specified value. Also the control box should be scale accordingly. But when i tried to change the video component's width and height while loading, it's not getting changed.
View 4 RepliesI would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 1 RepliesI have a video display in my flex app. which is attached to the camera. The camera resolution can vary depending on the user's selection, While the video display (preview) dimensions are fixed. I am then doing this:
bmd.draw(vidDisplay);
Where bmd is the bitmap.. The problem is the resulting bitmap has the correct size of the camera settings (which is set) but the capture from the video is always the size of the video display inside the bitmap.. I hope i am making sense. The result looks like a little picture inside a bigger image top left justified. I want to have a video display preview with fixed height, but be able to take snapshot with varying resolution.
Is there anyway (with action scripting) when having a Flash Video set to Expand to 100% Width and Height to have certain elements within that video maintain their inherent size and not scale ?URL...Notice how the BG Scales, but the video in the center does not nor does the footer. Is this performed with CSS and using multiple DIVs with varying Z Indices.
View 4 RepliesI am looking at the SimpleButton entirely wrong. Here's what I'm doing (inside of a MovieClip):
[Code]...
the close_btn.width and height remain 0. Am I supposed to just rely on the DisplayObject members of the SimpleButton completely and ignore width/height/x/y or what?
I'm trying to edit an HTML that uses swfobject to load a flash file.
What I'm trying to do is to reduce the size of the SWF file.
I've tried editing the height and width parameter within the swfobject(), but that didn't work.
I tried reducing the width height in the HTML css, but that also didn't work..
How can I pass a 'width' or a 'height' parameter to the swfobject so it will actually load the swf in a smaller or 'zoomed out' way?
I'm loading a flash MovieClip (Test.swf) like below. The problem is I can't read the size of mc (mc.width and mc._width both return 0, for the height as well), but I need to scale it. I have the stage size, I can scale, but I don't have the size of Test.swf, so I can't scale it to fit into the stage... ActionScript2, not actionscript3. If it was 3, I could get the value from the loader, but with as2??? The problem is I don't have control over the swf I load, so I can't put it's dimensions in the first frame...
[Code]...
package
{
import flash.display.*;
[code].....
swfObject embed has the following signature,swfobject.embedSWF(swfUrlStr, replaceElemIdStr, widthStr, heightStr, swfVersionStr, xiSwfUrlStr, flashvarsObj, parObj, attObj, callbackFn)with width and heigth required attributes,What can I do to signify dynamic height and width.
View 4 RepliesIn the following code Only the button image has been embeded into the flex code. But in the html object or embed tag why the height and width has to be specified. Even though for this is a normal button if we do not specify the height and width there seems to be some error
HTML
<div align="center"><br />
<div style="display:block;width:100px;height:100px;" id="audio"
class="testsound" align="center"/>
<p class="clickable">
<object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="400" height="100" id="myMovieName">
[Code] .....
I am using the stage ScaleMode as NO_SCALE and want to know the width and height specified in HTML in the embed tag. Is there a way to go about it?
View 1 Repliestrace(root.width);
trace(stage.width);
Both these return 100. Same for height. The stage has been set to 1024x620 in the editor.I'm using CS5, Flash version 10, windows7 64-bit.I don't get what's going wrong here. I'm trying to center something and it keeps coming out like this.
I thought this would be straight forward but I'm having trouble repositioning my content. I have a button instance named rollOne, When I roll over the button I want to load an swf object but not on top of the button so I want to find out what the button's width is so I can reposition the dynamically loaded content. I thought rollOne.width would return the width, but it only returns 0 the same goes for height.
rollOne.addEventListener(MouseEvent.MOUSE_OVER, fetchQty);
function fetchQty(event:MouseEvent):void {
myContainer.x = (rollOne.x + rollOne.width);
myContainer.y = (rollOne.y + rollOne.height);
var img1Request:URLRequest = new URLRequest("8032697883620.swf");
var img1Loader:Loader = new Loader();
img1Loader.load(img1Request);
myContainer.addChild(img1Loader);
trace(rollOne.width);
}
I've come to notice recently while using bitmap objects in the Flash CS5 (maybe before as well) authoring environment that are less than 4 pixels in width and/or height that they are treated as though they are 4 pixels wide/tall. Many of the bitmaps I use are 1 px wide in one direction or the other, and they are stretched to fill an area. Lets say I have a bitmap that is 20px tall and 1 px wide, and I stretch it to be 100px wide. The "hit area" of the object, or parent objects that contain it, is 400 px wide. So even if you click a significant distance away from the object, it is still selected, and anything underneath that invisible area can't be selected.
I've also noticed that when exporting a frame as an image, the smallest the width/height may be is 4px, and when I click the Edit button in the Properties panel with a Bitmap instance selected, it opens up in Photoshop CS5 and is 4 pixels wide! I'm wondering if for some reason Flash can't handle bitmaps less than 4 pixels in width/height and is treating it as if it IS 4 pixels wide, possibly even adding 3 extra columns of transparent pixels, because if I do the same thing manually, naturally it acts identical to the way Flash treats the 1px wide version. But why? Why can't Flash handle small bitmaps? Seems to me that's more efficient than quadrupling the amount of memory required.
Is there a way to get a jpg's image and height (before dynamically loaded) within flash? The only way I could do it was to load the image into a containerMC, but I would like to do it before the image loads. the only other way I could think of was to send the image link to a php script and returning its height/width to flash.
View 5 Replieshaving a problem with loading in different swf files into the stage. If I use a empty movieclip (holder) nothing shows up but when I set the width and height of the holder_mc the swf files show up but are zoomed in for some reason.
Code:
var x:XML = new XML();
x.ignoreWhite = true;
[code].....
Is there any way to read the width and height of a flash object using jQuery?
View 1 RepliesI am trying to use IE8's IWebBrowser2 interface to obtain a webpage's embedded flash's url, height, width information. This flash can be generated by javascript. So I did like this: from IWebBrowser2 I got IHTMLElementCollection，then I iterated through the collection to get IHTMLObjectElement2，and finally called get_data() to get flash's url.
But when I tried to extract flash object's url for [URL], get_data() returned "null". Why is this?So what's the difference between IHTMLObjectElement2 and IHTMLElement2? What's the right way to obtain IHTMLElement2 from IWebBrower2?
I am trying to load an external swf file. The swf width and height is small and I want to enlarge it when loading it. (My scene has large width and height). My current code could load the file but I am not sure how to enlarge the swf width and height.
var request:URLRequest = new URLRequest("index.swf");
var loader:Loader = new Loader()
loader.load(request);
addChild(loader);