Is their a way to determine the height and width of your flv f4v file after you dynamically load it?
Couldn't find any properties in the loader or netstreaminfo that I could grab the info from.
i want to load external images of different height and width into same height and width.
View 3 Repliesi want to load external images of different height and width into same height and width.
View 0 RepliesI would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 3 RepliesI am trying to reference to top level (stage) width and height of the main stage for the placement of something located inside a movieclip on the stage.
My code is:
Code:
my_loader.x = (stage.stageWidth - my_loader.width)/2;
my_loader.y = (stage.stageHeight - my_loader.height)/2;
But this seems to just relate to the width/height of the mc that my_loader is nested in...
I have tried the following and had no luck:
stage.stage.stageWidth
root.stage.stageWidth
parent.stage.stageWidth
MovieClip(root).stage.stageWidth
I am using net stream video player with xml. How can i get videos dimension (Width and Height).if suppose i get the dimension of the video and i will change the video size with aspect ratio.
View 1 RepliesThe plan is to have that video stretch across the whole page (the flash does, the video itself does not).Firstly: well aware of the issues - bad performance, horribly stretched/pixelated video. I know this. However a client wants it so we have to do it, simple as that.Does anyone have any ideas on how this can be achieved? I've been in touch with the creators of the flash video player I'm currently using and they've confirmed it isn't possible with that flash video player.
View 1 Repliesi'm using loadmovie() to load a youtube video player inside my flash website but i want to specify the width and height so it can fit my box.This is my code:
vloader.loadMovie("http://www.youtube.com/v/Alw5hs0chj0&hl=fr&fs=1hJ-mPcGtC");
I have an empty CLIP called "vloader" where i load the video player.Note: it is recommended that i get a code in Action script 1.0
When I publish my FLV video using Flash CS3 and the "SkinUnderAll" option...the player controls are not visible unless I change the height & width in the html file Flash created.But, Flash shows the height & width 3-times in the html.
Question-1: Why 3-times? What does each of the 3 Height & Width references do?
Question-2: How should I modify the code to be able to see the entire video and the player controls?
It seems if I change all 3 everything just gets bigger and bigger.
1 - I import it into Flash CS3 on a PC w/XP Pro using... File | Import | Video take all the defaults and choose "Skin Under All" as the player option.
2 - In "Properties" panel at bottom of screen Flash shows the video as 640x480
3 - I then click File | Publish to publish the video. Flash creates all my files for me.
MyVideo.fla
MyVideo.flv
MyVideo.html
MyVideo.swf
SkinUnderAll.swf
AC_RunActiveContent.js
4 - I then put the folder with the files on my website.
5 - The video plays but the player controls are not visible.
6 - I see the Height & Width referenced 3 times in the html file Flash created for me (and none are 640x480, they are 550x400 !)
7 - I try changing the 550x400 to 640x480 in all three places... no good. Even at 1000x1000 the entire player is not visible. Everything just gets larger.
What are each of the 3 references to Height and Width in the html file Flash Creates and which should I change to simply show all the player controls?
I am new in AS3.I am using net stream video player with xml. How can i get videos dimension (Width and Height).if suppose i get the dimension of the video and i will change the video size with aspect ratio.
View 7 RepliesI am new in AS3. I am using net stream video player with xml. How can i get videos dimension (Width and Height).
if suppose i get the dimension of the video and i will change the video size with aspect ratio.
I have a Flash CS4 Professional version installed in my machine. Here is my problem.
1st - I'm importing an image to stage and set the width and height to match the image. (everything is good, no problem) 2nd - I am using the FLVPlayback components build-in from Flash CS4. It does load the video and everything. (everything seems good) 3rd - Publish the video to my local drive (everything seems good) 4th - I could play the video from my local pc and it loads fine and fast 5th - Upload everthing from my local folder to the Web server, it does display the background image but not the video. It has a white blank screen. What is going on? I copy the exact folder from local to server. What have I missed? How could I make the video to load?
Already I have one video player and it's width and height are set as 450 and 370 respectively. It's set by statically on its property field. Now I want to change the width and height of video component according to the specified value. Also the control box should be scale accordingly. But when i tried to change the video component's width and height while loading, it's not getting changed.
View 4 RepliesI would like to use a movieclip to load a flv video. The problem I have is that I want to change the video dimensions. I've tried several software to change the video dimensions but as far as it seems all of them keep the same height-width ratio than in the original video. Is there any software that would allow me to change the height and width without keeping the same height/width ratio as in the original video file?
View 1 RepliesI'm loading an external video player SWF into a MC, but once loaded the size of the SWF is always wrong and for some reason takes up the whole stage area.
So i want to set the width and height of the SWF thats loaded. If i set the MC width/height then once the SWF loads it's no longer that size. So i have to have some kinda code, that says once the SWF has been loaded, to resize it to 360x240 pixels. [code]...
Posible to load mc or swf and give a width or height in %?
View 6 RepliesI have a video display in my flex app. which is attached to the camera. The camera resolution can vary depending on the user's selection, While the video display (preview) dimensions are fixed. I am then doing this:
bmd.draw(vidDisplay);
Where bmd is the bitmap.. The problem is the resulting bitmap has the correct size of the camera settings (which is set) but the capture from the video is always the size of the video display inside the bitmap.. I hope i am making sense. The result looks like a little picture inside a bigger image top left justified. I want to have a video display preview with fixed height, but be able to take snapshot with varying resolution.
We sometimes get swfs at my job that doesn't match our standard banner width and height. We only have the swfs and not always able to get hold of the *fla.So we want to load the swf into our different standard banner size and show it.
How do I load the swf into a new *fla that has my standard stage width:995 and stage height: 150? Without distorting the swf to much. Swf could be loading into a MC or loading directly onto stage.I tried the loadMovie and loaded the swf into a empty MC. But I can't set the MCs width and height.
i use cs4 make as3 loader from SharedObject.getLocal, load flex make swf file, so width/height is not Ok
load cs4 make swf file is Ok,
as3code:
// copy right china summer xiatian qq 11602011
package{
import flash.net.SharedObject;
import flash.utils.ByteArray;
[Code].....
I gave up on Flash heavy coding when it switched to AS3. Always thought it was less intuitive, longer, and a brand new language and I got tired of trying to keep up when most of my clients did not want to pay for a full flash site. But I got this client...
Here's the problem, I can load a swf into my main stage or into an MC , but I cannot find out anywhere how to set parameters or load into a level so it doesn't replace the current material or fix to a size that doesn't block my other material.[code]...
I have code here that allows a user to load an image from their local machine to the SWF (using FileRerence). The movieclip is 500x400 in size and I need the width of the selected image to resize to 500, and crop off any height beyond 400.
[Code]....
I was wondering if there was a way to dynamically load JPEGs and read their width/ height attributes before they actually land on stage. I have tried it once wherein I hide the targetted movie clip and try to utilize the INIT functin to check for initialize. This works pretty good except that a little dynamic animation I need tends to act a little later than it should creating a bug if u proceed immediately.
View 4 RepliesIs there anyway (with action scripting) when having a Flash Video set to Expand to 100% Width and Height to have certain elements within that video maintain their inherent size and not scale ?URL...Notice how the BG Scales, but the video in the center does not nor does the footer. Is this performed with CSS and using multiple DIVs with varying Z Indices.
View 4 RepliesI was wondering if there was a way to dynamically load JPEGs and read their width/ height attributes before they actually land on stage.I have tried it once wherein I hide the targetted movie clip and try to utilize the INIT functin to check for initialize. This works pretty good except that a little dynamic animation I need tends to act a little later than it should creating a bug if u proceed immediately.
View 4 RepliesI am looking at the SimpleButton entirely wrong. Here's what I'm doing (inside of a MovieClip):
[Code]...
the close_btn.width and height remain 0. Am I supposed to just rely on the DisplayObject members of the SimpleButton completely and ignore width/height/x/y or what?
Has anyone seen a Flash video player out there that will load and play two videos at the same time, such as for comparing videos? A potential client is looking for something along the lines of this. I've not been able to locate anything out there,and I'm wondering if there's a usability reason for this...Obviously, you wouldn't want the audio playing for both at the same time, and the bandwidth issue for something like this might be a concern too. My feeling is that you wouldn't want to restrict a user to just playing both videos at once, but give them the option to play them separately or at the same time, with controls for each audio and playback.
View 1 RepliesI just created a basic flash file to play a video on my web page and it's taking several minutes to load before it starts playback. I'm using progressive downlaod and the file is in *.mov format and is 84MB in size. At first that seemed large to me for web play back, but I thought it could handle it since I thought the way progressive download works is that it would start playing the first frame right away and progressively play other frames as they download. However, this seems to be downloading the whole file first (or a major part of it) before starting any playback at all.
Is there some kind of setting I'm missing or is my understanding of the download incorrect and the file size is too large? Some vitals: I'm using Flash Pro CS5 - To create my flash file, I used the standard import video wizard and selected the a file that is "on my computer" and "load external video with playback component" and then, I selected one of the standard skins.- To deploy the vidoe on my webiste I have three files:
1) swf file containing the FLV component
2) the swf file related to skin
3) the actual video (84MB, mov file) - Web page includes/embeds reference to swf file
I'm trying to edit an HTML that uses swfobject to load a flash file.
What I'm trying to do is to reduce the size of the SWF file.
I've tried editing the height and width parameter within the swfobject(), but that didn't work.
I tried reducing the width height in the HTML css, but that also didn't work..
How can I pass a 'width' or a 'height' parameter to the swfobject so it will actually load the swf in a smaller or 'zoomed out' way?
I'm loading a flash MovieClip (Test.swf) like below. The problem is I can't read the size of mc (mc.width and mc._width both return 0, for the height as well), but I need to scale it. I have the stage size, I can scale, but I don't have the size of Test.swf, so I can't scale it to fit into the stage... ActionScript2, not actionscript3. If it was 3, I could get the value from the loader, but with as2??? The problem is I don't have control over the swf I load, so I can't put it's dimensions in the first frame...
[Code]...
package
{
import flash.display.*;
[code].....