When the mouse hovers over the image the cursor flickers between hand and standard mouse pointer. One work around I've tried is to place an object under the main button that is bigger than the main button. That seems to work but only for that button. If I try it for others...well the image because cluttered with useless boxes.
View 9 RepliesI have created this menu with 5 buttons. The script attached to these buttons tells a movie clip to play certain sections of the clip to create the mouse over mouse out effect. The problem is if I move the cursor away too quickly the rollOut does not happen and the button is left in rollOver state.
View 3 RepliesI am trying to figure out how to make a bottom bar similar to the one seen ontions inside the bar- here's what I've got so far:as you can see I have a date/time MC inside the bar_mc which is working fine but whenever I try to have a new rollover/rollout movieclip (or button) inside the bar_mc it won't work/won't show rollover animation.
View 1 RepliesI need some help figuring out why my rollout is not working on this menu:I put some little close buttons at the bottom just to link them closed for now.Rollout isn't working.My code for each link is a movie clip with two frames for example links on "mens"Frame 1:
Code:
stop();
mens.addEventListener(MouseEvent.ROLL_OVER, mensMouseOver, false, 0, true);
[code].....
I have about 6 buttons that have an over state and hit state. I have actionscript that has them going to a url when on the hit state and on roll over it is showing a text label. All of that is working. The issue that I am having is that for 3 of the buttons, they flicker when you roll over them. These are built and coded exactly the same as the others that are working. where I should look for the breakdown? It seems strange that there is a inconsistency unless it is the order of the buttons or something like that.
View 1 RepliesI have a problem with flickering mouse custom cursor. I have a timeline which is my main clip and I want to show a pencil like cursor when I am over the timeline movie clip. I am using standard Mouse events, MOUSE_OVER and MOUE_OUT, MOUSE_MOVE. Also I use Mouse.hide()/show() functions to show and hide the mouse.Also the same principal or the pencil movie clip which I show and Hide.
On MOUSE_MOVE is set the coordinates of the pencil movieclip to be those on the Mouse cursor. How ever I get a flickering of the mouse and the pencil movieclip while above the timeline movieclip. So they change from one to another all the time without stopping i.e filckering.
[Code]...
I have a movie clip that has contains some dynamic text fields and over these some movieclips that serve as buttons. The issue I'm having is, that while the movieclips have buttonMode set to true, and mouseChildren set to false, when testing in a browser, after a few seconds of rolling over them, the cursor starts to flicker, as thought there is a conflict between the text fields trying to fight the button for focus. I have tried adding ROLL_OVER states to the buttons (thought they are not needed) in an effort to monopolise focus, while I'm not 100% sure, its seems as though this is a textfield issue.
View 6 RepliesI'm trying to create a rollover for a movie clip. On rollover, a line underlines the text,and when it rolls out, the underline reverses. This works fine the first time. The next time you rollover, the animation doesn't work. Then when you move the mouse off the button, a line appears under the text and doesn't go away. Here's my code on the invisible button.
on(rollOver){
this.gotoAndPlay("animIn");
}
[code].....
I have a problem with a flash image gallery that I created and have now posted to my website.
When the flash movie is viewed on it's own you can click the main images and you are taken to a product page. However when the flash movie is integrated into the website, the links are random at best and for the most part dont work.
Take a look:
1. Standalone flash gallery
2. Embedded in webpage
I thought that the scrolling marquee to the left of the page might be causing a problem but the problem doesn't go away when I remove this.
The problem I am having is, I am creating a flash animation on a movie clip.. When the user rolls over the area, the movie animates, and as they roll out of the area, the movie animates again..This isn't a very big deal but, I dont want the cursor to change from the default.. But the OnRollOver property tells the mouse cursor to flip to a hotlink cursor.. Is there a way to prevent that?
View 2 RepliesThere is a flash which have a small navigation on the buttom. There is a small arrow on the buttom when the mouse rollover on the arrow the arrow is gone dissaper and the navigation show on the stage. When i rollout the mouse its collaps but when my mouse pointer is in the swf area. If i have rollout quickly form the navigation out of the swf area (on html). It's not working.
View 3 RepliesI have an issue with the attached project (Flash 8). On the rollOver event, the shapes are supposed to turn yellow. On the rollOut event, the shapes should fade back to blue.It works well except in the case when you quickly rollOver then rollOut several times (try it with the largest shape at the bottom). If you do it fast enough, it seems to get hung on 'blue', the initial color.
View 2 RepliesI am getting the following error on button's rollOver & rollOut property using actionscript 3.
The code:
Thumb1.onRollOver = function () { this._alpha = 100;}Thumb1.onRollOut = function () { this._alpha = 50;}
The error is :1119: Access of possibly undefined property onRollOver through a reference with static type flash.display:SimpleButton.
so I'm currently working on a project where I will have the user mouse over an image (in this instance, a paint can) and ideally a menu should scroll up with information (which is a movie clip) and when the mouse comes off the menu would scroll back in. What I've currently got going is the paint can image as a button, and on another layer I've got the movie clip at 0% opacity. The action itself works, but the point in which the user has to mouse over is very finicky. There must be something I'm missing. I've worked with Flash years ago, so I'm a bit choppy.
[Code]....
I've been searching around and can't quite seem to find the answer. I gather it's a problem with actionscript, but, i digress.
What's going on is if I move my mouse too fast it won't activate either the RollOver or RollOut, and it'll just stay. Is there a certain way I need to set everything so it will NO MATTER WHAT animate when rolledover, and then ALWAYS RollOut?
I have a button which on ROLLOVER shows a MOVIECLIP on the stage and on ROLLOUT it should remove it from the stage.Check out this code which perfectly works as i want
[Code]...
but my problem is wen i go back to same button after a rollover, the movie clip doesnt show or code does not respond.
I want to have a few menu buttons on my web page (home, about, contact etc.) and above them a bar (we'll call it 'grey bar' to make it a little easier to understand). When you roll over one of the buttons I want a small 'orange bar' to run along the 'grey bar' and stay over the button that you are hovering over. Then if you choose to rollout of the button the 'orange bar' will return to the page destination button that you're on. For example, if you are on the homepage the 'orange bar' begins over the 'home' button, then if you rollover 'about us' the 'orange bar' moves along the grey bar horizonatally to stay above 'about us', if you rollout it returns to 'home'.
Sorry if this isn't making much sense, i've attached the flash file so you can see what i am working with. I am just looking for a tutorial or some actionscript that will make it work. It's driving me crazy, I don't know if i should be looking to use a startDrag function (but i don't think you can use this with a rollover function) or a way to get the bar to follow the mouse.
i have followed the complex button tutorial today to design a websites buttons..
I wanted each button to link to a seperate frame for each seperate page of the site.
The roll out effect is all in one movieclip, with the actions on frame one (below)
//stop(); this.onEnterFrame = function(){
[Code]....
but I have had no success, it works perfectly for URL's typically!
xample how to use rollover and rollout?
View 2 Repliesfor (k=1; k<7; k++) {
this["btn0"+k].onRollOver = function() {
var yBtn:Tween = new Tween(this["btn0"+k], "_y", Strong.easeOut, this._y, this._y-8, 1, true);
}
};
[Code]....
I try to use tweening script for going up and down with a movie clip. But when I export, the button just keep going down and not going up again.
I've got 5 buttons (btn1_mc, btn2_mc, etc.) that I need to assign the same listeners to for the RollOver and RollOut to go to frame 2 and back to 1, and I'm sure there's a better way to do it than this, but I can't get it working.
[Code]...
basically its a movieclip button with 2 other movieclip within it. i managed to code the rollover and rollout script for it but there is a funny spot that keeps triggering my rollover and rollout script endlessly if i leave my mouse hovering on it....any expert out there can clear this doubt of mine pls^^?^
View 3 RepliesI have a site im making that has the text which i want to slide up on rollover and slide back down on rollout, I was able to get it to slide up but not back down all the way or back up all the way once it slid down halfway. It also doesn't wait for rollover to slide up if i leave the page and come back.
Here is my code:
Actionscript Code:
var endhome = 582.6addEventListener(MouseEvent.ROLL_OVER, roll);while roll(evt:MouseEvent)
[code].....
I have a lengthy text running in flash movie. I want the movie clip to be stopped (meaning pause) when the mouse roll over on it to read the content... and when the mouse roll out from the movie it should be played continuously. ( not from the beginning. ) how to write the code snippets?
View 1 RepliesI have a movie clip of scrolling images, but I want it to stop/pause when I hover over the movie, then start on RollOut.I'm guessing I need to use something like:on(rollOver){this.stop();}on(rollOut){this.play();}
View 1 RepliesI am trying to create a zoom effect on my buttons "home - about - contact" so that when you rollver "home" that button gets bigger and the "about & contact" buttons move to compensate the size increase and the same for the other two buttons.
View 1 RepliesWhat is the best way to add a custom rollover and rollout to a buttonbarbutton? I tried adding the eventlisteners in the custom skin I am using but the mouseevents do not get fired.
View 1 Repliesthe stage I have created a button, and inside that button I have created a movie clip with 15 still frames of an animation I want played when mouse rolls over the button. As you'd expect it plays fine when the mouse does roll over and it stops on the last frame as I have typed the stop(); command.How do I get that same animation to reverse, and play backward when I roll out?
View 3 RepliesI have a movieclip that has a stop function on the first and last frame. I want the user to rollover a button on the stage, and have the movieclip go to frame 3 and stop. When they rollout, I want the movie clip to go back to frame 1 and stop. There is a stop code on both the first and last frames so the mc won't play through. I had it coded in as 2 and it worked fine, but I am using Flash cs4 now and I changed the publish settings to as3. It seems extremely complicated to get this to work in as3
View 3 RepliesI am trying to create MocieClip Buttons, but after writing the code i have observed that the rollover and rollout events are getting called multiple times even though i rolled over only once.
View 2 Replies